Need another ecm
#1
Junior Member
Thread Starter
Join Date: May 2001
Location: bloomsbury,nj,USA
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Need another ecm
I have a 90 firebird with a 3.1 in it. My wiring harness caught on fire and shorted out. I've repaired all the wires but the car still doesn't run right. With a scanner hooked up everything seems fine. I think the short may have taken out the ecm. I can't find a 90-91 fb or camaro to take one out of. Is there any other car I could take an ecm out of.
#2
Supreme Member
Join Date: Jan 2001
Location: Halifax, NS,Canada
Posts: 1,221
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1995 Z28
Engine: LT1
Transmission: Built 4L60E
Axle/Gears: 3.23's - Limited Slip
Push you back to the top.
I believe you can buy new ECM's from summit, jegs or some place like that. And they sell them for not too bad a price, and its new! Tomp or Ked I think know more about this and where they are on the site.
I believe you can buy new ECM's from summit, jegs or some place like that. And they sell them for not too bad a price, and its new! Tomp or Ked I think know more about this and where they are on the site.
#3
Supreme Member
Join Date: Jan 2001
Location: ****SoCal, USA****
Posts: 7,604
Likes: 0
Received 0 Likes
on
0 Posts
OK, all I'll suggest is to call the local yards for this part.
I DO NOT know the exact ECM's you can "use/swap" for your exact model.
Those words are correct, "Exact Model".
I assume you have a Camaro or a Firebird, 49 state (not a CA car), V-6, Auto, AC?
Call around .
After they give you a yes or no, ask them to suggest any other model options.
IN MY CASE, I used a ECM from a V-8 car.
I only need to swap the proms, from my V-6 into the V-8 ECM.
Worked perfect for me!
I would suggest, possibly biting the bullet & also buy that donor car wiring harness, too.
------------------
Chat Soon,
KED85
Karl
1985 Firebird 2.8 to 3.4 swap project for Smog Happy LA, CA
I DO NOT know the exact ECM's you can "use/swap" for your exact model.
Those words are correct, "Exact Model".
I assume you have a Camaro or a Firebird, 49 state (not a CA car), V-6, Auto, AC?
Call around .
After they give you a yes or no, ask them to suggest any other model options.
IN MY CASE, I used a ECM from a V-8 car.
I only need to swap the proms, from my V-6 into the V-8 ECM.
Worked perfect for me!
I would suggest, possibly biting the bullet & also buy that donor car wiring harness, too.
------------------
Chat Soon,
KED85
Karl
1985 Firebird 2.8 to 3.4 swap project for Smog Happy LA, CA
#4
Senior Member
Here is the ECm interchange list from the tech article section (seems I have been going there a lot latly!)
https://www.thirdgen.org/newdesign/t...erchange.shtml
I brezzed over it and wasn't able to make to much sense out of it, but I thought it might help.
https://www.thirdgen.org/newdesign/t...erchange.shtml
I brezzed over it and wasn't able to make to much sense out of it, but I thought it might help.
Thread
Thread Starter
Forum
Replies
Last Post
efiguy
Engine/Drivetrain/Suspension Parts for Sale
0
09-27-2015 01:30 PM