cold start injector wire color matching
#1
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Tenino, Washington
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 f-bird and some others
Engine: 3.4
Transmission: 700R4
Axle/Gears: 3.42
cold start injector wire color matching
Harness is tan and brown.
Plug I got from the junkyard is purple and brown.
Chiltons shows purple and tan.
What do you all think? Hook up brown to brown and purple to tan?
My old plug is gone. I think it's ok either way, but I'm not completely sure.
Plug I got from the junkyard is purple and brown.
Chiltons shows purple and tan.
What do you all think? Hook up brown to brown and purple to tan?
My old plug is gone. I think it's ok either way, but I'm not completely sure.
#2
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: cold start injector wire color matching
Purple to purple and whatever else to whatever else. Purple is the power wire coming from the CRANK circuit. If you do it backwards, the CSI isn't going to open.
#3
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Tenino, Washington
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 f-bird and some others
Engine: 3.4
Transmission: 700R4
Axle/Gears: 3.42
Re: cold start injector wire color matching
Hmmm. I'll double check, but the two wires coming from the harness are tan and brown.
I'll search my toolbox some more and see if I didn't save the broken connector that I cut off. Or just extend the wires so I can get to them after installing the distributor, and then I can test for voltage while cranking it.
I'll search my toolbox some more and see if I didn't save the broken connector that I cut off. Or just extend the wires so I can get to them after installing the distributor, and then I can test for voltage while cranking it.
#4
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: cold start injector wire color matching
The one wire is probably dirty. Only 2 wire colors in the circuit, purple and tan (power wire running to underdash connector is purple with white stripe, but you don't need to worry about that ATM).
http://92b4crs.tripod.com/86wiring/dia-pics/21-6.jpg
http://92b4crs.tripod.com/86wiring/dia-pics/21-6.jpg
Thread
Thread Starter
Forum
Replies
Last Post