I have a dilemma with my 3.1L
#1
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Marietta
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Chevy Camaro RS
Engine: V6 3.1L
Transmission: Auto
Axle/Gears: Stock
I have a dilemma with my 3.1L
Recently, I was dealing with my shitty accel injectors and i accidentally snapped a bolt off in my intake(closest to the firewall on the passenger side, lower intake) and to continue my day of hell, I went on to break the lower part of the upper intake that connects to the TB. I got another upper intake from the junkyard and did the same thing again but this time it was the top part with a cleaner break. Right now, I'm using JB KwikWeld to fix that. My question is What is the fastest / cheapest solution to the problem? What intakes are interchangable with my 3.1?
#2
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Marietta
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Chevy Camaro RS
Engine: V6 3.1L
Transmission: Auto
Axle/Gears: Stock
Re: I have a dilemma with my 3.1L
Pull a part has these listed on their website as interchangeable with my 3.1l?
PONTIAC FIERO 1985
CHEVROLET CAMARO 1985
PONTIAC FIERO 1985
PONTIAC FIERO 1986
PONTIAC FIREBIRD 1987
CHEVROLET C/K 1500 SERIES 1992
CHEVROLET C/K 1500 SERIES 1993
CHEVROLET C/K 1500 SERIES 1995
PONTIAC FIERO 1985
CHEVROLET CAMARO 1985
PONTIAC FIERO 1985
PONTIAC FIERO 1986
PONTIAC FIREBIRD 1987
CHEVROLET C/K 1500 SERIES 1992
CHEVROLET C/K 1500 SERIES 1993
CHEVROLET C/K 1500 SERIES 1995
#3
Junior Member
Thread Starter
Join Date: Dec 2012
Location: Marietta
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Chevy Camaro RS
Engine: V6 3.1L
Transmission: Auto
Axle/Gears: Stock
Re: I have a dilemma with my 3.1L
what mods are needed for me to run the 2.8 upper intake?
#4
Member
Re: I have a dilemma with my 3.1L
All 2.8 and 3.1 upper intakes are interchangable except the fiero ones. Those are offset for the distributor and will likely not fit with factory intake plumbing.
Thread
Thread Starter
Forum
Replies
Last Post
HoosierinWA
Tech / General Engine
5
10-07-2015 10:15 AM