AS&M Runners
Thread Starter
Member
iTrader: (1)
Joined: Jan 2010
Posts: 478
Likes: 0
From: Los Angeles
Car: 1991 RS/B4C clone
Engine: 355 TPI
Transmission: Probuilt Street/Strip 700r4
Axle/Gears: 7.625 axle with 3.23 gears/TrueTrac
AS&M Runners
Has anyone tried to order AS&M runners lately? I ordered mine back in October and still haven't received them. Do they normally take 4+ months to get these out the door? This is the only thing holding my project back.
Supreme Member
iTrader: (2)
Joined: Sep 2006
Posts: 2,118
Likes: 15
From: Houston, TX
Car: 1989 GTA
Engine: SuperRam 350
Transmission: Pro Built S/S TH700R4
Axle/Gears: 3.27
Re: AS&M Runners
https://www.thirdgen.org/forums/grou...e-runners.html
Unfortunately, the answer is yes. I was in on a group purchase for some AS&M runners several years ago. It took them 10 months to fill the orders. I quit after several months of waiting and went with a different intake. Many others did too.
Unfortunately, the answer is yes. I was in on a group purchase for some AS&M runners several years ago. It took them 10 months to fill the orders. I quit after several months of waiting and went with a different intake. Many others did too.
Joined: Feb 2003
Posts: 2,498
Likes: 20
From: PNW
Car: 91 Black Formula KR
Engine: 305 TPI R69/G92
Transmission: Astro A5-Pro 5.0-McCleod
Axle/Gears: US Gear 3.42 Eaton True Trac
Re: AS&M Runners
I must of been somewhat lucky... I ordered mine in December 2011 and got them late Feb 2012...
Rafael
Rafael
Thread Starter
Member
iTrader: (1)
Joined: Jan 2010
Posts: 478
Likes: 0
From: Los Angeles
Car: 1991 RS/B4C clone
Engine: 355 TPI
Transmission: Probuilt Street/Strip 700r4
Axle/Gears: 7.625 axle with 3.23 gears/TrueTrac
Re: AS&M Runners
Wow, that's a great turn around. I just got off the phone with them; they still have no clue when they will be done. They are at the pipe bender right now, apparently.
Joined: Sep 2004
Posts: 5,906
Likes: 240
From: Chicagoland Suburbs
Car: 1989 Trans Am GTA
Engine: LT1, AFR 195cc, 231/239 LE cam.
Transmission: M28 T56
Axle/Gears: 3.23 10bolt waiting to explode.
Re: AS&M Runners
They are the best aftermarket runner you can get for factory fit TPI components though. 
http://www.flickr.com/photos/85540264@N02/7990484905/http://www.flickr.com/photos/85540264@N02/7990484905/ by http://www.flickr.com/people/85540264@N02/, on Flickr

http://www.flickr.com/photos/85540264@N02/7990484905/http://www.flickr.com/photos/85540264@N02/7990484905/ by http://www.flickr.com/people/85540264@N02/, on Flickr
Thread Starter
Member
iTrader: (1)
Joined: Jan 2010
Posts: 478
Likes: 0
From: Los Angeles
Car: 1991 RS/B4C clone
Engine: 355 TPI
Transmission: Probuilt Street/Strip 700r4
Axle/Gears: 7.625 axle with 3.23 gears/TrueTrac
Re: AS&M Runners
I'm just going to borrow someone's to get my motor done.
Trending Topics
Re: AS&M Runners
It's a nice product, but production is slow. I got mine about 6 years ago. They happened to be in stock, so I got them in a few days. Unfortunately they were dented(which was probably why they were "on hand"), so I returned them. Took about 2 months to get the next set. Since then, people have been posting 6 months+ wait times.
With so many people opting for LT and LS swaps in the last few years, demand for these has probably slowed a lot. So apparently they wait until they have enough orders to "justify" a production run.
With so many people opting for LT and LS swaps in the last few years, demand for these has probably slowed a lot. So apparently they wait until they have enough orders to "justify" a production run.
Thread Starter
Member
iTrader: (1)
Joined: Jan 2010
Posts: 478
Likes: 0
From: Los Angeles
Car: 1991 RS/B4C clone
Engine: 355 TPI
Transmission: Probuilt Street/Strip 700r4
Axle/Gears: 7.625 axle with 3.23 gears/TrueTrac
Re: AS&M Runners
Oh, you actually have them? Do you have any pics of your motor?
Joined: Sep 2004
Posts: 5,906
Likes: 240
From: Chicagoland Suburbs
Car: 1989 Trans Am GTA
Engine: LT1, AFR 195cc, 231/239 LE cam.
Transmission: M28 T56
Axle/Gears: 3.23 10bolt waiting to explode.
Re: AS&M Runners
I indeed have pics of when they were on my car. Now I have an LT1, so they are long gone.
http://www.flickr.com/photos/85540264@N02/7990486193/http://www.flickr.com/photos/85540264@N02/7990486193/ by http://www.flickr.com/people/85540264@N02/, on Flickr
http://www.flickr.com/photos/85540264@N02/7990495398/http://www.flickr.com/photos/85540264@N02/7990495398/ by http://www.flickr.com/people/85540264@N02/, on Flickr
http://www.flickr.com/photos/85540264@N02/7990486455/http://www.flickr.com/photos/85540264@N02/7990486455/ by http://www.flickr.com/people/85540264@N02/, on Flickr
http://www.flickr.com/photos/85540264@N02/7990495650/http://www.flickr.com/photos/85540264@N02/7990495650/ by http://www.flickr.com/people/85540264@N02/, on Flickr
http://www.flickr.com/photos/85540264@N02/7990495766/http://www.flickr.com/photos/85540264@N02/7990495766/ by http://www.flickr.com/people/85540264@N02/, on Flickr
http://www.flickr.com/photos/85540264@N02/7990486193/http://www.flickr.com/photos/85540264@N02/7990486193/ by http://www.flickr.com/people/85540264@N02/, on Flickr
http://www.flickr.com/photos/85540264@N02/7990495398/http://www.flickr.com/photos/85540264@N02/7990495398/ by http://www.flickr.com/people/85540264@N02/, on Flickr
http://www.flickr.com/photos/85540264@N02/7990486455/http://www.flickr.com/photos/85540264@N02/7990486455/ by http://www.flickr.com/people/85540264@N02/, on Flickr
http://www.flickr.com/photos/85540264@N02/7990495650/http://www.flickr.com/photos/85540264@N02/7990495650/ by http://www.flickr.com/people/85540264@N02/, on Flickr
http://www.flickr.com/photos/85540264@N02/7990495766/http://www.flickr.com/photos/85540264@N02/7990495766/ by http://www.flickr.com/people/85540264@N02/, on Flickr
Thread Starter
Member
iTrader: (1)
Joined: Jan 2010
Posts: 478
Likes: 0
From: Los Angeles
Car: 1991 RS/B4C clone
Engine: 355 TPI
Transmission: Probuilt Street/Strip 700r4
Axle/Gears: 7.625 axle with 3.23 gears/TrueTrac
Re: AS&M Runners
Oh man, those look great. Hopefully they come in soon.
Thread
Thread Starter
Forum
Replies
Last Post
Chas91Z28
Engine/Drivetrain/Suspension Wanted
10
Oct 22, 2015 10:12 AM
Royal_Z
Engine/Drivetrain/Suspension Parts for Sale
4
Sep 30, 2015 08:45 PM







