if you've got a nice clean engine, stock or modified, post it...

also, i've noticed a lot of under-hoods with the protective black mesh material removed...isn't that there to preotect the hood paint from heat produced by the engine??

 

Here's mine, I've got some new valve covers going on it soon.

 

heres mine. i havent cleaned it in a why'll. plus all the emissions crap is on the way.

 

Here it is

 

Here's a few of the 383 in the 82.

 

Heres my motor...this was a couple days after i got it steam cleaned.

 

 

Here's mine.. its kinda clean I suppose. It'll look much better with a new coolant tank and some headers.

 

MetalliCamaroRS - What is that cable on the passenger side of the motor?

 

Here's my new engine:

 

it looks like a fuel pressure guage or something, but i have no idea what it is on MetalliCamaroRS

 

here's mine..not too many 3rd gens with 327's at least.

 

Heres the one in my sig but a little bigger, its a 360 {a 350 bored .060}
Note the small gauges located where the A/C box used to be, no more peeking inside to see engine status!

 

 

A short story.....

Oops, I appear to have lost my head(s)

 

shall I put these bits back on?

 

Ok, thats all finished. I couldn't afford the headers at this time, so yes I put the smog back on

 

BTW, JAY4SPEED, that motors looks great!!!

 

Here's a picture of my engine bay. I'm slowly working on improving her looks but other projects have forced me into taking a detour.

A few pictures of the polished plenum:

A picture of the reflection from a spark plug:

The difference of of what it used to look like compared to the plastic cover:

I will be getting the aluminum one shortly if I don't sell my car by then. Looking to switch to a supercharged Mercury Cougar

 

Here's Mine.

 

the 305 i blew right after new years

the 350!!!

 

My engine died... Ive got to go back to the pet shop and get a replacement....Oh how I loved Duke......he will be missed. This is what happens when you neglect your engine. I forgot to check the fluids and it died.

 

here is the real deal....not much better I might add.

 

HeheheahahahHAAAAAAHAHAHHAHAH!!!!!!


<img src=http://www.metalcorex.com/autorama/camaro4.jpg>

 

<b>[QUOTE]Originally posted by polishdevil
[B]the 305 i blew right after new years

the 350!!!
[QUOTE]
</b>

Did you just swap out the TPI.

 

89Irocz23 guessed it right, its a fuel pressure gauge.

 

Here are my pics from a few days ago. I still have to put the harness, distributer and computer in. I've really got to get ceramic coated headers too.

 

Here's Mine

 

Onto the pile:

 

redbird_400 i bought an 89 GTA and i was goin to use everything from it, but i ended up using my old tpi setup becuase of all the wiring i would have to change.

 

Gay!!

 

Here's mine. New Jamex bar just installed.

 

Another.

 

:hail: LBSZ28BLOWN :hail: You have the cleanest car, the cleanest engine bay, and the cleanest "to die for" garage I have seen. Nice work! Your car is awesome! Did you buy it new? It is spotless, looks fantastic under the hood.

OK guys, here is a pic of mine:

 

Just waiting to get my car back, will have pics. Nice new 383 with headers and the good stuff. Got to drive it today, the things a rocket on wheels . So pics in a few days.

 

mine

 

Here's the mighty (messy) 305! I haven't done anything to clean it up yet. Soon though, soon.

 

Here's mine:

 

Tom
YEP, I bought it new.

 

lb: I know I have said it before but you are is the most amazing on this site. Too me at least. You have all the mods that I want to do on my vert. The only difference is I want to go with the ATI P-1SC. But I want to do the large tube runners, and 17" silver ZR1s. I have my Jamex STB that I painted up last night. Hopefully that will be going in soon.

Again unbelievable... of course I can only say that when I am work cause my car might hear me at home and get jealous.

 

I second that! Thats a bad *** blown sob!

here are some more little purple dudes for ya!!!
:hail: :hail: :hail: :hail:

 

THANKS GUYS,
The car was stock up to a couple of years ago, then I found this site and that was what did it for me.
This summer I'm swapping out the heads for some ported aluminum units, New SLP 1 3/4 Headers,and some 17X11 SS wheels with 315x35x17 tires on the back.

My goal is a mid to low 12sec. 1/4

Thanks again

 

mine is in the sig. pic

 

Mine, Non-A/C heater box is on order right now, so that will make my firewall less ugly.

 

This is right after the new radiator mount, right before the new MSD ignition system. So in other words, a week ago today.

 

:lala:

 

not a V8, but its clean so here

 

Hey, your engine is in sideways!


j/k

 

ya, someday i'll get the RWD conversion kit

 

like his....