window problems
#1
Junior Member
Thread Starter
Join Date: Sep 2000
Location: El Paso
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
window problems
hey... Im having 2 problems with my windows. 1 is that when I roll them up & down they seem to scratch the tint on my windows, what to do? The second thing is I need to know what the lining/striping is called that covers both sides of the windows(& how much $$) because I need to replace it. Mine is all torn and when I roll up my window the strip seems to hang off the side of my door & flap around. THanks
------------------
You know what they say. Injection is great...but Id rather be blown!
------------------
You know what they say. Injection is great...but Id rather be blown!
#2
Supreme Member
Join Date: Apr 2000
Location: Virginia Beach, VA, USA
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
They're probably getting scratched because your seals/stripping is shot. I'm not sure what car you have but for a Firebird/Trans Am (hell, they're probably the same for Camaros too) the numbers are as follows:
The outer stripping: Driver side 10124265, Passenger side 10124264 - $18.98 each
The inner stripping: Driver side 12394511, Passenger side 12394510 - $46.75 each
The inner stripping is expensive because it is the entire door panel top plastic piece - that's the only way you can get it from the dealer. Call Dal at VanDevere Motors, tell him you got his name on the Internet Thirdgen site for a discount: 1 (800) 362-9494.
Steve
The outer stripping: Driver side 10124265, Passenger side 10124264 - $18.98 each
The inner stripping: Driver side 12394511, Passenger side 12394510 - $46.75 each
The inner stripping is expensive because it is the entire door panel top plastic piece - that's the only way you can get it from the dealer. Call Dal at VanDevere Motors, tell him you got his name on the Internet Thirdgen site for a discount: 1 (800) 362-9494.
Steve
#4
Member
Howdy there, one other possiblility could be the brace pieces inside your door. They look like an L shaped chunk of metal that bolts to the door with a ten mm bolt, and the bottom leg of the L is covered with felt like material and they simply support the window. There is one about 8" to 12" from the back of the door, and another about a foot past that one towards the front. They are underneath the upper plastic trim piece on the inside of the door. Cost is like six or eight dollars a piece. Just one more thing to look into, take care now.
#5
Supreme Member
Join Date: Apr 2000
Location: Virginia Beach, VA, USA
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Reznor:
thanks for the reply.I drive an 86 IrocZ..is any of the info different?
thanks for the reply.I drive an 86 IrocZ..is any of the info different?
Steve
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
1Aauto
Sponsored Vendors
0
08-26-2015 02:18 PM