straight from the paint booth, check it out...
Thread Starter
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
straight from the paint booth, check it out...
aka my garage, haha. Me and my grandpa have just finished up 3 days of sanding, primering, and painting. Here's the finished pics, she still needs a few small things put back on like taillights and misc. interior pieces.
Lighting is bad, but u get the idea.
Lighting is bad, but u get the idea.
Thread Starter
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
wow... its a lot brighter on the lcd screen of my camera.
Thread Starter
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
lastly, here you go. she needs cleaned a little bit but hey, its late and i've got a full day of work getting her road ready tomorrow.
my friends stopped by and were all amazed. I give the props to my Grandpa, this wouldn't of happened w/o him.
Tell me what u think!
my friends stopped by and were all amazed. I give the props to my Grandpa, this wouldn't of happened w/o him.
Tell me what u think!
Member
Joined: Feb 2003
Posts: 480
Likes: 0
From: Dayton, Ohio Area
Car: Yellow/Black 1987 Z28
Engine: 355 Carb
Transmission: 700R4
props to your grandpa. looks good.
how are you going to get the paint off the fender liners and places that have overspray on them?
how are you going to get the paint off the fender liners and places that have overspray on them?
Thread Starter
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
i have some thinner left over for the overspray.
thank you kretos and kev
thank you kretos and kev
Trending Topics
Supreme Member
Joined: Aug 2004
Posts: 4,168
Likes: 3
From: Marietta, GA
Car: '91 Firebird Convertible
Engine: 305 TBI (LO3)
Transmission: 700r4, Vette Servo
Axle/Gears: 3.27 9 Bolt, PBR disks
I get mine out of the paint shop Thursday. I feel like a kid on Christmas eve except it's actually just December 23rd!
I hate the anticipation.
I hate the anticipation.
Senior Member
Joined: Nov 2003
Posts: 618
Likes: 0
Car: 1983 25th Anniversary Daytona 500 Pace Car Trans Am
Engine: 5.0L 305 Crossfire-Injected V8
Transmission: 4 spd. auto
not half bad... most of the time when ppl paint them at home in their garage they come out looking like S*it but you guys did a pretty decent job. Anyone who worked on that deserves a congrats. Hope you enjoy it
Thread Starter
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
haha its actually worse seeing it going from looking like crap, to a really nice looking daily driver IMHO. Its not show worthy but i almost cried when i came home from soccer today, it was sitting in the driveway all painted and all the tape and paper removed.
...I did about 5% of the work, Gramps 95%. He was a little hard on himself about it since he hadn't painted a car in a good 20 years or so. I was thrilled to death.
Tomorrow I'll throw the stuff back on it and drive it around town, can't wait for the looks
Brandon
...I did about 5% of the work, Gramps 95%. He was a little hard on himself about it since he hadn't painted a car in a good 20 years or so. I was thrilled to death.
Tomorrow I'll throw the stuff back on it and drive it around town, can't wait for the looks
Brandon
Thread Starter
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
Originally posted by CaysE
Go Sport Coupes!!!!
Go Sport Coupes!!!!
I saw that u were in the apperance forum, i was just waiting for u to come and say that! Haha.I see way too many RS's in these parts. I know most ppl would want gfx and i'd prolly take some too but I love it the way it is!
now to get on ordering that 350HO....
Thread Starter
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
Originally posted by carlover01
what was the code you repainted it with? i hope to paint mine about the same color.
what was the code you repainted it with? i hope to paint mine about the same color.
As for the name, its "Viper Red".
Gook luck, its a pretty cool color, i think it might even glow in the dark....
Junior Member
Joined: Mar 2004
Posts: 93
Likes: 0
From: Wisconsin
Car: 1983 Camaro
Engine: 305 4bbl
Transmission: 700r4
That looks awesome!!! I'm planning on painting mine this winter with the help of my dad. He just got done painting his 69 Camaro last summer. Jade Stone! it's sweet, so i'm not worried about the paint job looking good. Also it'll be painted in a 20'x20' garage with plenty of space to move in. It's nice having family/friends that can do stuff like that. And it's cool because you'll always remember them for it!
Supreme Member
Joined: Jun 2003
Posts: 1,985
Likes: 1
From: Massachusetts
Car: candy blue 85 z28
Engine: 305 tpi LB9
Transmission: 700r4 crazy beefed up one
Axle/Gears: ones with teeth
yes i have to agree give gramps a big hug that is an awsome job and nice to see you appreciate him and give him the credit. good job
As for you inner wells just spray em with some black paint or undercoating forget the thinnner idea.
let the car cure a good while some before washing or waxing. only water rinses every day to remove dust. don;t forget the wetsanding and buffing in a few days. what type of paint did he use was it a base clear? or shot all in one.
looks good take care of it.
Jeffw
As for you inner wells just spray em with some black paint or undercoating forget the thinnner idea.
let the car cure a good while some before washing or waxing. only water rinses every day to remove dust. don;t forget the wetsanding and buffing in a few days. what type of paint did he use was it a base clear? or shot all in one.
looks good take care of it.
Jeffw
Thread Starter
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
Carlover1, it was originally a maroonish deep red.
It is a single stage paint, I would like to wetsand and buff it in the near distant future.
I would like it to eventually shine something like 84customs....but in red, we've all seen that moving black mirror.
I've heard the term "orange peel" over and over again, but what's the proper definition? Kinda a paint/appearance noob.
...now to figure out why my left turnsignal doesn't work now
'Brandon
It is a single stage paint, I would like to wetsand and buff it in the near distant future.
I would like it to eventually shine something like 84customs....but in red, we've all seen that moving black mirror.
I've heard the term "orange peel" over and over again, but what's the proper definition? Kinda a paint/appearance noob.
...now to figure out why my left turnsignal doesn't work now
'Brandon
Supreme Member
Joined: Nov 2001
Posts: 2,037
Likes: 0
From: Cypress, SoCali
Car: 2006 Tacoma X-Runner
Engine: 4.0L DOHC V6
Transmission: 6-Speed Manual
Axle/Gears: 3:15 LSD
Originally posted by Tobias05
I've heard the term "orange peel" over and over again, but what's the proper definition? Kinda a paint/appearance noob.
I've heard the term "orange peel" over and over again, but what's the proper definition? Kinda a paint/appearance noob.
Thread Starter
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
Originally posted by camaroman_83
Jade Stone!
Jade Stone!
Thread Starter
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
Originally posted by trans87
Orange peel is where the surface of your paint looks like the surface of an orange. You then wetsand it to get rid of the orange peel giving it that smooth showroom shine. Awesome job on the car.
Orange peel is where the surface of your paint looks like the surface of an orange. You then wetsand it to get rid of the orange peel giving it that smooth showroom shine. Awesome job on the car.
haha
Yeah its "peeling out" lol
Originally posted by Tobias05
haha, hell ya
I saw that u were in the apperance forum, i was just waiting for u to come and say that! Haha.
I see way too many RS's in these parts. I know most ppl would want gfx and i'd prolly take some too but I love it the way it is!
now to get on ordering that 350HO....
haha, hell ya
I saw that u were in the apperance forum, i was just waiting for u to come and say that! Haha.I see way too many RS's in these parts. I know most ppl would want gfx and i'd prolly take some too but I love it the way it is!
now to get on ordering that 350HO....
As for RS's.... well I just joined that club, too. I just brought home a 92 RS.
Senior Member

Joined: Dec 2003
Posts: 905
Likes: 3
From: Weyauwega, WI
Car: 86 Camaro
Engine: none
Transmission: none
Axle/Gears: GT4, 3:73s
Originally posted by CaysE
There's nothing like seeing an SC come to life. Everyone wants a Camaro with ground effects, but the sport coupes turn the heads when they're done right. Well, maybe I'm just imagining things.
As for RS's.... well I just joined that club, too. I just brought home a 92 RS.
There's nothing like seeing an SC come to life. Everyone wants a Camaro with ground effects, but the sport coupes turn the heads when they're done right. Well, maybe I'm just imagining things.
As for RS's.... well I just joined that club, too. I just brought home a 92 RS.
:lala: forgive me for saying this but sometimes i like seeing sport coupes around than irocs.
Thread Starter
Supreme Member

Joined: Jul 2003
Posts: 2,779
Likes: 2
From: any clime or place...
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
Originally posted by CaysE
Everyone wants a Camaro with ground effects, but the sport coupes turn the heads when they're done right. Well, maybe I'm just imagining things.
Everyone wants a Camaro with ground effects, but the sport coupes turn the heads when they're done right. Well, maybe I'm just imagining things.
How about some power now?
<-Insert comment about ditching boat ancher LG4 for a 350HO I'm ordering this Saturday->
:hail: Sport Coupes
Brandon
Thread
Thread Starter
Forum
Replies
Last Post




Give your Gramps a HIGH FIVE 
