Hey guys, I have been working on a car for a customer for a couple weeks now and thought you all might like a sneak peak of it, the owner told me he comes on here and has been wanting to post pictures but does not have a digital camera, anyways let me tell you a little bit about the car, its a 92 camaro rs, we hve shaved the antenna, side markers, all emblems, molded the rear spoiler in, it has corvette dual oval exhaust exiting through the rear bumper, 4 inch cowl induction hood, lt1 engine with a turbo 400, 18x9 zr1's 68 camaro taillight custom molded on to the car, i havent included pics of anything but one side shot, we were picking the car up to take it from his house back to the shop to sprayit charcol grey met, with grey pearl and satin black hockey stick on the side as well as teh sides of the cowls, the interior is next to be competed and will be mostly red with some black, custom fiberglassd center counsol and the nitrous tank will also me fberglassed into the car, its going to be a very clean car and i will keep you all updated from this point until its complete which should be mid april let me know if anyone can host some pictures of it from me it would be great help thanks guys.
D.T. Customs

Sounds good but i dont understand what you are asking us to do?Do you already have the pics and dont know how to post them???

i snapped a pic of it already i just need somone to host it for me if they would

ahh i forgot to mention, the car has z3 fender vents molded in as well

email them to xlakersfan04x@aol.com

you can upload onto here or to host it you can use uploadit.org

allright thanks guys, im not much of a computer guy so at the moment im trying to get them from the camera to the computer, i will email them to you as soon as i figure out what im doing

bs buddy, i have seen you around on this sight before and you have no respect for anyone inmy opinon what part of this car makes you want to say bs, i will have you pics tonght buddy will see what you have to say then, if your real bored take a drive out to midland mi and check out are work, seems like you have nothing better to do anyways

Keep pushin it...

haha no let him keep talkin, i like proving people wrong, most people think its not possible to do certain things to cars, thats just because they dont do them they pay people like me to

i believe in you.

you are the one.

what do you mean keep pushing it , i didnt say anythign wrong , i dont think he has all the stuff done to the car , whats wrong with that. Is it illegal to say i dont think that he has something done , ive never seen z3 vents . I want to see pics first , i hate when people say o yeah i have 8 million dollars, well if you do show us some how or dont brag.

you're just jealous because he's the one and you're not.

I definately want to see pics, i am curious how you are putting all this together and making it look right, not calling bs or anything but i am unsure of the look i cant put the combo together in my head lol.

Only thing i dont agree with is all this is being done by someone else, but hey not everyone has the knowledge, ability, space or time to do what some of us do by ourselves

PICS

It sounds like it ought to be pretty sweet when its finished.

personally it sounds very over done as some of the mods don't flow well with the lines of a typical thirdgen however who cares about conventional wisdom. post the pictures or email them to me and i'll post them for you.

does this "customer" plan to take it to any shows,

www.camarosuperfest.com

wink... wink....



if midland wasn't so far from me i'd take the trip to see something different. i'm excited to see the 68 tail light mod and the charcoal paint but until i see the actual car the rest doesn't appeal to me but i love to see different things so get this rolling and put a picture up.

hey gys hanks for the kind words, as fars as teh mods we have done, the hardest thing to do so far was teh 68 taillights, the shap of them do not flow around teh corner of the car like the original ones, it doest not look to over done at all, most of the things dont to the car were removing pasrt we didnt want, antenna emblems ect. the z3 fenders were tough to fit but not bad, im taking my camera into the shop today and having them put on the computer there, i had to download some program to allow th picture to load on my computer and somone over there will know what there doing thanks guyus, this isnt bs i promise you, just keep an eye on this post you will get just a small idea of what were doing

[QUOTE]Originally posted by Kandied91z
personally it sounds very over done as some of the mods don't flow well with the lines of a typical thirdgen however who cares about conventional wisdom.



mmmm raII hoods


it all sounds very cool, but I just dont know about the z3 vents....Im very curious to see it though

i'm another one with the "I'll believe it when I see it" perspective here. It's just suspect when a brand new member talks about having done 1.5 million mods that are uncommon and says they have pics but don't post right away. I hope I'm proven wrong, but doubt I will be.

the hardest thing is his tail light mod. don't be so hard on people guys. the rest isn't anything that hasn't been done here before in one way or another.

pics have been sent should be posted soon

sounds pretty cool...z3's i think would look good cause flynlow has those fender vents and thats not even that bad...the tail lights i would have to see cause not alot of tail light conversions look good on are car..

Here is the first sample picture to keep you all happy for awhile. The rest are going to be posted soon. See I told you I wasn't lying. I'll have pictures of the exhaust, shaved antenna, molded spoiler, and more pictures when we get them finished. Thanks, DT customs

yeah they turned out really nice i think, the taillight mod was somthing diiferent and they have a ways to go but i have included a sneak peak of them, the exahaust is as i said befoer being exited through the rear bumper, and will have a rivited billet ring around it, lots more comming and i will keep you updated, everytihn inside teh fender wells that are visible are being powder coated red and grey there alos being removed today thanks guys hop you enjoy them

ok now i retract the bs flag.

whos the owner, and why isn't he getting in on this post?

i believe he siad his name is 92camaro? i told him there posted on here im sure he will check them out

The pics are downloading on my Pc as i type(gotta love dial up) anyways..where did you get those wheels in 18 inch size???

theres a company we work with who hss them, i can get them in all black, silver, chrome, or grey like these, they run around $500- to your door

here are the pics..i will only post three of them due to the rules of the boards.....this one had to be edited for the lights to show up...

2

and 3

Maybe you can send me a better pic of the tailights???that one didnt come out too well and you cant see the work that was done....

i purposly took a poor picture of the taillgihts i did not want to give them away yet, they were set in about a week ago so we could lay a coat of primer on it, i will show you a better picture, once we complete the remaining modifacaations to the exterior, the taillights are finished as of the afternoon though so if i get enough requests i will show a better picture

theres my first request haha im not at the shop anymore so i will take more tomorrow from inside the shop they should come out a little beter that way

this is a game to you!!?!? lol! show the dang picture.

i could drive all the way out there at this hour just for you.. but there alot of people here that think im not for real..... look real close you can get the idea, all i have to say is when we set these in a few guys around the shop said the same thing as a few others here, "there not gonna look like they belong on the car, well they do, they turned out very well and im very pleased with them, few more requested and i might take a late drive for you guys

I live 10 min. away..... mind if i come over and see, and maybe bring my dig. camera????

I count 4 requests...who wouldnt take a drive just to see a thirdgen???

let me give my dan a call and see if he minds, sounds cool to me

well, chop chop dude.

aight me and dan decided not to show it off yet sorry man, but.... if you guys think you might like what what you see then im going to the shopp for you guys for one more picture of the tails few more requests and im gonna get off my butt, you can come check out teh car in about a week bro, sorry but we dont want to show it off untill we get the last few things done

this thread =


let us know when the pics are posted...

dirty tease...

haha no kiddin

haha i just dont want to go for a drive, but i will, let me chenge the batteries in the camera then i will go out there and snap some more or the tails

for real?

I'm curious as to how you molded fiberglass to metal... with the rear spoiler... are you not afraid of cracks?


The fender vents look well done IMO but everything else isn't really my style. I'm curious as to how the tail lights worked out from the side... is there just empty space there now like the C4 light conversion?