My car is going in a book! pics inside!
My car is going in a book! pics inside!
Welp, some of you know me on hear and others don't. I typically lurk alot but I hang out at that other 3go board
Anywho, a while back I was approached about putting my car in a book that has been written on the Rochester Quadrajet, more specifically modified ones. Because I still use my Quadrajet and all of the emmisions (minus the EGR valve) and because it has been modified it fit the bill perfectly. I still need to be chosen for the book but my chances are pretty good. They are going to use 4-5 different cars and I'm in the top 7 to be chosen from.
The fella that came to take these pics is actaully a frellance photographer for High Performance Pontiac! Which I thought was pretty KEWL!
The pics took about 45 minutes and turned out spectacular! I'm very appreciative that he took them even if it doesn't make the cut.
I'm actually pretty stoked about them because I catch ALOT of **** for building a Berlinetta. I built the thing to be different while still being able to have my Camaro. I also built it with everything it came with such as Emmisions, Computer, A/C ect. I get sooooooo tired of seing hacked up 3rdgens it makes me sick!
Welp, all the haters can take a hike now!
I had to shrink these down considerably as the origionals were 4MB EA!!! so here they are!
All comments are welcome good or bad!
Anywho, a while back I was approached about putting my car in a book that has been written on the Rochester Quadrajet, more specifically modified ones. Because I still use my Quadrajet and all of the emmisions (minus the EGR valve) and because it has been modified it fit the bill perfectly. I still need to be chosen for the book but my chances are pretty good. They are going to use 4-5 different cars and I'm in the top 7 to be chosen from.
The fella that came to take these pics is actaully a frellance photographer for High Performance Pontiac! Which I thought was pretty KEWL!
The pics took about 45 minutes and turned out spectacular! I'm very appreciative that he took them even if it doesn't make the cut. I'm actually pretty stoked about them because I catch ALOT of **** for building a Berlinetta. I built the thing to be different while still being able to have my Camaro. I also built it with everything it came with such as Emmisions, Computer, A/C ect. I get sooooooo tired of seing hacked up 3rdgens it makes me sick!
Welp, all the haters can take a hike now!
I had to shrink these down considerably as the origionals were 4MB EA!!! so here they are!
All comments are welcome good or bad!
Supreme Member
iTrader: (4)
Joined: Apr 2005
Posts: 1,124
Likes: 0
From: Cleveland, Ohio
Car: 1992 Firebird
Engine: 3.1L V6
Transmission: 5 Speed Manual
Axle/Gears: 3.42 Peg Leg
sweet camaro. I say if you want to modify it, even if its 1 of 1, do it. I myself like to keep things looking stock, but love the look of a modified
For those that are wondering...
355 SB w/Vortec heads
10.5:1 Compresion
Edelbrock Performer Intake
Pete Jackson Gear Drive
Extreme 262 Cam
The Carb is a Rochester Quadrajet that was modified by Sean Murphey Induction
MSD 6A-L Ignition & wires
Hypertech Coil, cap and rotor
The computer has a Jet Performance Stage II chip
Edelbrock headers
Random Technologies High flow Cat
Mufflex 4" Exhaust with Flowmaster 30 series Race muffler
700R4 Tranny built with Trans Go goodies and a Jet performance Torque converter and servo
Stock 10 bolt W/3.73's
355 SB w/Vortec heads
10.5:1 Compresion
Edelbrock Performer Intake
Pete Jackson Gear Drive
Extreme 262 Cam
The Carb is a Rochester Quadrajet that was modified by Sean Murphey Induction
MSD 6A-L Ignition & wires
Hypertech Coil, cap and rotor
The computer has a Jet Performance Stage II chip
Edelbrock headers
Random Technologies High flow Cat
Mufflex 4" Exhaust with Flowmaster 30 series Race muffler
700R4 Tranny built with Trans Go goodies and a Jet performance Torque converter and servo
Stock 10 bolt W/3.73's
Trending Topics
Senior Member
iTrader: (10)
Joined: Oct 2003
Posts: 666
Likes: 0
From: IL
Car: 91RS_92Z28
Engine: 5.0_5.7
Transmission: WCT5_WCT5
Axle/Gears: 3.08_3.42
Berlinetta's seem to have that "classic" appeal that other 3rd gens don't seem to have, or at least not yet. (imo)
Looks way clean from here. Thanks for keeping the emmisions gear too.
More pics:
https://www.thirdgen.org/techbb2/sho...&threadid=6484
Looks way clean from here. Thanks for keeping the emmisions gear too.
More pics:
https://www.thirdgen.org/techbb2/sho...&threadid=6484
Last edited by srdynamics1; Jul 14, 2005 at 08:04 PM.
Supreme Member
iTrader: (5)
Joined: Aug 2004
Posts: 1,912
Likes: 0
From: Redondo Beach CA
Car: '02 Z06
That's the nicest berlinetta i've ever seen!!I normally dont like thirdgens without ground effects but that thing kicks *** and screams american muscle. Awesome car i woudn't change a thing.
Member
Joined: Apr 2005
Posts: 266
Likes: 0
From: New Milford CT
Car: Trans AM
Engine: 305 TBI LO3
Transmission: W/C T-5
Axle/Gears: 3.42 Open
Member
Joined: Apr 2003
Posts: 301
Likes: 0
From: Lincoln, NE
Car: '91 Camaro RS
Engine: 305
Transmission: T-5
thats a nice berly!
its awesome to see someone else from lincoln on here....talk about hacked up thirdgens, you definately see those around here. do you ever go to any local gatherings? (such as Culver's on friday nights) i would love to see your car
by the way, i love the cowl
its awesome to see someone else from lincoln on here....talk about hacked up thirdgens, you definately see those around here. do you ever go to any local gatherings? (such as Culver's on friday nights) i would love to see your car
by the way, i love the cowl
Member
Joined: Apr 2003
Posts: 301
Likes: 0
From: Lincoln, NE
Car: '91 Camaro RS
Engine: 305
Transmission: T-5
yes to both. lots of rust, mismatched body panels, those hideous chrome fender lip things, huge dents, wheels that stick out 6" past the car, etc. etc.
Originally posted by RSraider41
thats a nice berly!
its awesome to see someone else from lincoln on here....talk about hacked up thirdgens, you definately see those around here. do you ever go to any local gatherings? (such as Culver's on friday nights) i would love to see your car
by the way, i love the cowl
thats a nice berly!
its awesome to see someone else from lincoln on here....talk about hacked up thirdgens, you definately see those around here. do you ever go to any local gatherings? (such as Culver's on friday nights) i would love to see your car
by the way, i love the cowl
Thanks for the compliments!
WOW! thanks for looking those up! dang those are old! still has my old exhaust and crappy water bottles on it!
Thanks!!!
Originally posted by DanTheMan_smlk
what do u guys mean by hacked up? rusty? ugly mods?
what do u guys mean by hacked up? rusty? ugly mods?
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
wow, simply gorgious! really lovin it! gotta 1990 that i've ripped the gfx off of and have started the transformation into an 87 sport coupe. i can't stand the gfx cars once i've seen a few without them that look good.
yours, jbenge, and there is a green berlinetta with vette wheels floatin' around too that look incredible. i hope that oneday my 1990 rs/sc will make it into that crowd. i know my 87 is recognizable, and everything that is there works and the ac/computer stuff was ripped out, but it was done tastefully (ie, all extra wires removed, ac delete box fitted, etc.). but it's not quite of the same caliber, which is why i am building the 1990. no rust whatsoever to speak of on the car and the body is straight. the drivetrain is getting swapped next month, then it's off to paint. THEN, maybe i'll be with you guys.
i also have an 84 berly that a buddy of mine and i are restoring to it's former glory. it's his first thirdgen and we're excited about it!
yours, jbenge, and there is a green berlinetta with vette wheels floatin' around too that look incredible. i hope that oneday my 1990 rs/sc will make it into that crowd. i know my 87 is recognizable, and everything that is there works and the ac/computer stuff was ripped out, but it was done tastefully (ie, all extra wires removed, ac delete box fitted, etc.). but it's not quite of the same caliber, which is why i am building the 1990. no rust whatsoever to speak of on the car and the body is straight. the drivetrain is getting swapped next month, then it's off to paint. THEN, maybe i'll be with you guys.
i also have an 84 berly that a buddy of mine and i are restoring to it's former glory. it's his first thirdgen and we're excited about it!
Thanks mang! I didn't realize that there are so many guys that don't care for the GFX cars out there! I like the GFX cars but just couldn't bring myself to putting them on. SC's stand out a little better then the others do.
Thanks for the complliments!
Thanks for the complliments!
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
here is a few i found that i believe look really incredible:
this is John in RI's

another of his:

jbenge's:

some inprogress pics of my junk:

the 1990 rs/sc in progress
this is John in RI's
another of his:

jbenge's:
some inprogress pics of my junk:

the 1990 rs/sc in progress
Last edited by mw66nova; Jul 14, 2005 at 11:32 PM.
Supreme Member
iTrader: (25)
Joined: Jul 2004
Posts: 2,623
Likes: 0
From: Beautiful BC
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
I love the colour, stripes, and black accent on the bottom... and the single pipe looks great.
Great job keeping it real!
Great job keeping it real!
Those are some nice Berly's
jbenge's car looks like what my car would've looked like had I gone with plan B. He even has the same hood as me... copycat??
Just kidding...
They all look good!
Keep going on that resto of the Red berly!
jbenge's car looks like what my car would've looked like had I gone with plan B. He even has the same hood as me... copycat??
Just kidding...They all look good!
Keep going on that resto of the Red berly!
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
actually, the red is an 87 sportcoupe LT, but it's getting trashed cause of the amount of rust on it (and the availability of finding another one in good shape in the area for cheap). the 1990 will recieve the front/rear bumper covers and the front fenders from the red car and will recieve all white paint the same week the final stage of transformation takes place. this car will probably only see the street one time before it gets painted. (the trip to the painter)
when decent bodies are available for cheap, it's easy to give up on one with lots of rust. of course the white car originally had gfx, so filling in the wholes from those is definitely a learning experience.
when decent bodies are available for cheap, it's easy to give up on one with lots of rust. of course the white car originally had gfx, so filling in the wholes from those is definitely a learning experience.
Supreme Member
iTrader: (1)
Joined: Apr 2001
Posts: 1,907
Likes: 0
From: In the state of bliss
Car: 1984 Pontiac Firebird
Engine: 2.5L Iron Duke 4 cylinder
Transmission: 5 speed manual
let's hear it for old school! That thing looks fantastic. I have a special place in my heart for the early camaros and birds. My bro used to own an 84 camaro V6 that we swapped in an L98 into.
I hope you get in that book. My car is also in a firebird book!! (for the iron duke).
later,
-bill
here is my bro's 84 S/C with IROCZ drivetrain:
I hope you get in that book. My car is also in a firebird book!! (for the iron duke).
later,
-bill
here is my bro's 84 S/C with IROCZ drivetrain:
Supreme Member
Joined: Jun 2001
Posts: 3,238
Likes: 4
From: Calgary, Alberta, Republic of Western Canada
Car: 1986 Sport Coupé
Engine: 305-4v
Transmission: 700R4 and TransGo2
I love that Camaro! It looks tough but sophisticated. And a bit understated.
As they say, "Brevity is wit." And your car has it
As they say, "Brevity is wit." And your car has it
Senior Member
Joined: Jul 2001
Posts: 839
Likes: 0
From: Valley Head, AL
Car: 1983 Camaro "SC-350"
Engine: Mild 350 4-bolt
Transmission: 700R4 w/ TCI Stall
ADV1, I just have to tell you that your car is definitely one of the nicest non-ground effect cars that I have ever seen. I have had this picture of it on my computer for years now, and I just love the way it looks. I hope my Sport Coupe will be as nice as yours one day, but I've still got a little ways to go
. Us non-gfx guys are becoming few and far between, and I like it that way. Dare to be different, right?
If you dont mind, I would love it if you would send me the big versions of the first and second pics to put as my desktop wallpaper...I just love your car! My email addy is mjcroxton@gmail.com
Thanks,
Matt
. Us non-gfx guys are becoming few and far between, and I like it that way. Dare to be different, right?If you dont mind, I would love it if you would send me the big versions of the first and second pics to put as my desktop wallpaper...I just love your car! My email addy is mjcroxton@gmail.com
Thanks,
Matt
Last edited by fast83camaro; Jul 18, 2005 at 05:28 AM.
Supreme Member
iTrader: (1)
Joined: Feb 2005
Posts: 2,642
Likes: 2
From: Pleasant Grove, Utah
Car: 1993 GMC Typhoon
Engine: 4.3 Turbo
Transmission: 4L60
Axle/Gears: 3.42
I still need to be chosen for the book but my chances are pretty good.
soooo basically your car isnt in a book.. and you dont know yet if it will be... oooook
nice name of the thread... should have called it " My car might be chosen to be in a book, and then again it might not"
Supreme Member
iTrader: (1)
Joined: Feb 2005
Posts: 2,642
Likes: 2
From: Pleasant Grove, Utah
Car: 1993 GMC Typhoon
Engine: 4.3 Turbo
Transmission: 4L60
Axle/Gears: 3.42
yeah.. i do.. hard to believe but i actually compliment a lot of people on this board... when warranted.. Supreme Member
iTrader: (1)
Joined: Apr 2001
Posts: 1,907
Likes: 0
From: In the state of bliss
Car: 1984 Pontiac Firebird
Engine: 2.5L Iron Duke 4 cylinder
Transmission: 5 speed manual
Originally posted by mw66nova
hehehe, dude, do you ever say ANYTHING nice?
hehehe, dude, do you ever say ANYTHING nice?

just giving you a hard time.
Supreme Member
iTrader: (1)
Joined: Feb 2005
Posts: 2,642
Likes: 2
From: Pleasant Grove, Utah
Car: 1993 GMC Typhoon
Engine: 4.3 Turbo
Transmission: 4L60
Axle/Gears: 3.42
i think you are the 1st person to ever make the connection... about time some one did.. damn..
Sorry it's taken so long to get back to you guys...
For those that want pics I will get them to you as soon as I can. I'm out on sales calls all of this week and it'll be hard to get to them until this weekend but I will get them to you!
Thanks for all of the compliments!
btw... Killjoy, I thought of that but for max exposure I purposesly left that "might" out of the title. I did however make sure I mentioned the real story right away. BTW, has your car ever been chosen for such a thing?
:raz:
For those that want pics I will get them to you as soon as I can. I'm out on sales calls all of this week and it'll be hard to get to them until this weekend but I will get them to you!
Thanks for all of the compliments!
btw... Killjoy, I thought of that but for max exposure I purposesly left that "might" out of the title. I did however make sure I mentioned the real story right away. BTW, has your car ever been chosen for such a thing?
:raz: Supreme Member
Joined: Mar 2005
Posts: 1,539
Likes: 0
From: Honolulu, HI
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
Sweet Berly, Im currently trying to find the money to restore mine, however i am going completely stock, By the way, Do you know of anybody who makes our decals? been searching all over the place for them.
Supreme Member
iTrader: (1)
Joined: Feb 2005
Posts: 2,642
Likes: 2
From: Pleasant Grove, Utah
Car: 1993 GMC Typhoon
Engine: 4.3 Turbo
Transmission: 4L60
Axle/Gears: 3.42
Originally posted by ADV1
has your car ever been chosen for such a thing?
:raz:
has your car ever been chosen for such a thing?
:raz: my car looks "miserable" like me
Thread
Thread Starter
Forum
Replies
Last Post
mustangman65_79
Body
3
Aug 11, 2015 03:17 PM





I'm lovin the 4" mufflex sewer pipe.


