This is my baby with of course some pretty cool plates
Please post pics of your car here for everyone else to see.

John


[This message has been edited by cruise12 (edited March 09, 2001).]

About friggin time, shheeshh forget this UBB code I see in some posts, it does not work. Have the pic of your car on the internet somewhere and use the html code.
Which is, (less than sign here)img src="http://Put the link to your pic here"(greater than sign here)

Enjoy people.

John


[This message has been edited by cruise12 (edited March 09, 2001).]

 

all I see is a little red X

 

John Boy, I am having a hard *** time, putting theis pic up. How did you post yours ???
Thanks for the help dude.

John

 

cruise,
There's a couple of posts on here about doing pics right now. I had to read both of them before I even started. Anyway you have to have it stored somewhere like www.photopoint.com or I used www.webshots.com just like that "PSA for posting pics" post detailed. then right clicked on my picture and clicked properties then copied the address that window gave me.then in the post just type ([img]http//blah blah blah.jpg]/img]) where the blah blah blah is your address and don't put the ( )'s around it.
deadbird says it much better.https://www.thirdgen.org/messgboard/Forum2/HTML/001246.html

 

Ok cool, Thanks JOhnboy, I got so frustrated with webshots, I went there and created a acct so I could post pics and got nowhere, So I relied on good ol' HTML. And it worked. I will try your away again later.

John

 

I clicked on the properties of you pic and I'm wondering if your on and have you picture stored with AOL? I also tried that for along time and never could get the UBB stuff to work with it at aol so that's when I found somewhere free to keep it.

 

Yeah I have my pic stored on AOL. What I did was FTP it to my site, then get the whole URL link to it and just copied it into the <img src> html code.
It was pretty easy

 

NICE!!!

 

my baby..

 

I see the pics just fine. Nice car, I especially like the license plate. I am thinking about getting WASSABI on my plates.

 

[This message has been edited by Neo (edited March 10, 2001).]

 

Here's my baby. Hope this works


------------------
SS 17x9.5 wheels,
HOTCHKIS 1"drop springs,
HOTCHKIS tower brace,
Bilstein struts and shocks,
k&n filters,
MSD 6A,
Accel 8.5mm Wires,
Accel Cap & Rotor,
Hypertech airfoil,
SLP intake runner (plennum not ported yet, soon)
High flow cats,
SPOHN panhard bar, lower control arms, and subframe connectors,
Baer front track system,
3" Flowmaster Exhaust System,
2100 Stall High Performance Torque Converter,
300 watt sound system,
and soon to come...ZZ4 crate motor...hopefully.



[This message has been edited by Chuck Everly (edited March 14, 2001).]

 

here's mine



------------------
88 iroc
LB9 305 tpi
k&n, flowmaster, ADS chip
160* thermostat
home made ram air
removed smog pump
TB bypass
ASCD big block hood

 

Hey John, you have a very beautiful car...but I'm not bias though....


------------------
Dreams can come true...
http://my1stcamaro92rs.cz28.com.

 

Jim,
If you do get wassabi, we have to get a pic of our cars together then,

 

is anyone else really sick of that wasssssup crap? but i guess i always thought it was annoying. imo

------------------
1985 WS6 Trans AM
T-tops
bone stock sloth of an engine LG4
T-5 tranny. thank god, i couldnt stand an LG4 auto.
Plans for an LT-1 or LT-4,
dual flowmaster exaust,
& a pounding stereo.
mods right now include a radar detector.
New exaust! Best No $ mod ive done. Thanks to the Sawsall

 

HybridZ.. here is your pic
<IMG SRC = "http://www.91HybridZ28.homestead.com/files/myz5.JPG">

 

Hybrid-Z....very nice car!
I love that color...and the rims look awesome.
Do you have any more pics?



------------------
Mr. IROC-Z
WWW.IROCZDESIGNS.COM Because looks are everything.

 

HERE IS MY BABY!!! but she doesnt look like this now. and wont again for probably 2-3 years. going through a total resto. so i am in denile. i miss driving so much. but the Insurance companies love my SR22 insurance premiums. oh well she will be done some day.




------------------
1990 IROC-Z L98/G92 350 TPI- 700R4
Too much to list!!
5,507 IROC's; 2,415 5.7L IROC's Produced in 1990
Dare to be DIFFERENT,
DAILY DRIVER: 1991 S10 2.5L/5SPD WITH CAMARO RIMS
MUSTANGS...ONLY 4 LUGS....HAHA THAT IS HILARIOUS.

 

Hey Cruise, Nice WOW sticker!

 

Oh my baby, how are u my baby? Do u feel good in that sunshine? Oh I bet you do...



------------------
Eric Natzke
91 Firebird 305 TBI
"It Ain't Stock"
http://members.aol.com/j007golden/91firebird.html
For info on certain parts or mods go to the site below
http://members.aol.com/j007golden/modeval.html

[This message has been edited by 91Bird305 (edited March 10, 2001).]

[This message has been edited by 91Bird305 (edited March 10, 2001).]

 

THANK YOU SO MUCH NEO!!!!!!!!!! ive ben waiting so long to see what my car looked like from the lot...i couldn't remeber what it looked like when my dad brought it home....now i know what mine will look like after new paint.......suuuhweet

------------------
1991 RS LO3
mods: 14" chrome air cleaner, straight-piped after cat exhaust with one chrome dual tip on the left side.
future mods: headers, removing smog equipment, and as many cheap mods as i can find
aol s/n: budman8503

GONE MUSTANG HUNTING.......
BACK IN 10 SECONDS

 

Whew, hey Cruise12 and Novaguy76, thanks a lot for helping. And thanks for the compliment MrIROCZ. More pics at my web site.
www.91HybridZ28.homestead.com/91HybridZ.html

------------------
SS 17x9.5 wheels,
HOTCHKIS 1"drop springs,
HOTCHKIS tower brace,
Bilstein struts and shocks,
k&n filters,
MSD 6A,
Accel 8.5mm Wires,
Accel Cap & Rotor,
Hypertech airfoil,
SLP intake runner (plennum not ported yet, soon)
High flow cats,
SPOHN panhard bar, lower control arms, and subframe connectors,
Baer front track system,
3" Flowmaster Exhaust System,
2100 Stall High Performance Torque Converter,
300 watt sound system,
and soon to come...ZZ4 crate motor...hopefully.

 

heres my Stang killer
http://www.geocities.com/jonnyarson/maro.jpg

 

Hey Bigmike, that is a sweet ride. Love the hood.

------------------
SS 17x9.5 wheels,
HOTCHKIS 1"drop springs,
HOTCHKIS tower brace,
Bilstein struts and shocks,
K&N filters,
MSD 6A,
MSD 8.5mm Wires,
MSD Cap & Rotor,
Hypertech airfoil,
SLP intake runner (plennum not ported yet, soon)
High flow cats,
SPOHN panhard bar, lower control arms, and subframe connectors,
Baer front track system,
3" Flowmaster Exhaust System,
2100 Stall High Performance Torque Converter,
300 watt sound system,
and soon to come...ZZ4 crate motor...hopefully.

 

Thank you

 

http://www.tweak3d.net/temp/z28.jpg

 

HECUBUS- Nice ride, wish my paint looked like that( my hood is unpainted and paint is allright)

------------------
1992 Z28 W/5.7L. Teal with unpainted cowl hood,18" Billet Specialities Rims,Eibach Sportline Springs, Leather int., B&M Mega Shifter, Headman Headers, Flows,No Cats,K&N,HyperTech air foil,Custome Burned Chip,MSD Ignition,Shift Kit, Billet Corvett Servo my Back License plate reads "ALL UL C"

 

Thanks BIGMIKE

I'm actually thinking of getting it all repainted when I finish my 383 though..
I was thinking of the same black with some nice silver racing stripes full length

what do you think?

 

Black with silver. I love it- espically since im getting my car painted soon and im getting silver with black stripes.

------------------
1992 Z28 W/5.7L. Teal with unpainted cowl hood,18" Billet Specialities Rims,Eibach Sportline Springs, Leather int., B&M Mega Shifter, Headman Headers, Flows,No Cats,K&N,HyperTech air foil,Custome Burned Chip,MSD Ignition,Shift Kit, Billet Corvett Servo my Back License plate reads "ALL UL C"

 

are you going to go full length with the stripes?

 

ya im going bottom of the front end to the bottom of the rear end with the old school style wide stripes running right between the headlights.

------------------
1992 Z28 W/5.7L. Teal with unpainted cowl hood,18" Billet Specialities Rims,Eibach Sportline Springs, Leather int., B&M Mega Shifter, Headman Headers, Flows,No Cats,K&N,HyperTech air foil,Custome Burned Chip,MSD Ignition,Shift Kit, Billet Corvett Servo my Back License plate reads "ALL UL C"
Here's a pic of my car
http://www.geocities.com/jonnyarson/maro.jpg

 

Sounds like it will look damn good with the hood..

Planing on painting soon?

 

im hoping in about 2 months or so-well see

------------------
1992 Z28 W/5.7L. Teal with unpainted cowl hood,18" Billet Specialities Rims,Eibach Sportline Springs, Leather int., B&M Mega Shifter, Headman Headers, Flows,No Cats,K&N,HyperTech air foil,Custome Burned Chip,MSD Ignition,Shift Kit, Billet Corvett Servo my Back License plate reads "ALL UL C"
Here's a pic of my car
http://www.geocities.com/jonnyarson/maro.jpg

 

great.. well you'll have to let me know when it's done so I can see.

 

trust me you willl know- ill probaly be so excited ill post it on every subject

------------------
1992 Z28 W/5.7L. Teal with unpainted cowl hood,18" Billet Specialities Rims,Eibach Sportline Springs, Leather int., B&M Mega Shifter, Headman Headers, Flows,No Cats,K&N,HyperTech air foil,Custome Burned Chip,MSD Ignition,Shift Kit, Billet Corvett Servo my Back License plate reads "ALL UL C"
Here's a pic of my car
http://www.geocities.com/jonnyarson/maro.jpg

 

on another note I see in your sig. that your running a MSD ign. which one and how do you like it??

 

i got the 6A- i like it alot- helped throttle response at high rpm's and felt maybe a small power increase.id recomend it

------------------
1992 Z28 W/5.7L. Teal with unpainted cowl hood,18" Billet Specialities Rims,Eibach Sportline Springs, Leather int., B&M Mega Shifter, Headman Headers, Flows,No Cats,K&N,HyperTech air foil,Custome Burned Chip,MSD Ignition,Shift Kit, Billet Corvett Servo my Back License plate reads "ALL UL C"
Here's a pic of my car
http://www.geocities.com/jonnyarson/maro.jpg

 

I was reading on another post about the ESC being in the ecm on speed dinsity, how did the ign. install?? do you have a pic of where you mounted it??

I ask cause I"M getting a 6al to go with the NOS to help at WOT

*this is tech questions sorry guys if you have to move*

 

Here's mine. Crappy pics but this is all I have.





------------------
'88 IROC 305 TPI
Crappy 700R4 slushbox
Gutted airboxes
180 degree T-stat
Advanced base TPS voltage
Relocated IAT sensor
Momo steering wheel (gotta luv it)
Ram-air setup coming soon
Flowmaster muffler (puke)
Taylor SpiroPro wires
Accel cap and rotor
Ported plenum
Kills: '94 Z28, Olds Aurora V8, bunch of Mustangs, T-birds, ricers, and others who assumed a 12 year-old car would be too slow.

 

heres mine

hehe j/k
here it is...

 

HA! Were ya board, Curse? Pretty funny!
I wish my car was clean here, but there hasnt been sun here for the last 2 months...
Im not kidding!

<a href="http://albums.photopoint.com/j/View?u=1581268&a=12030027&p=43499632"><img src="http://www.photopoint.com/images/pplogo3.gif" width="88" height="33" border="0" alt=""></a>

------------------
91 Z28 305 tpi
plans for 383
jet-coated TES headers
flowmaster cat-back
To be installed: SLP cam, TPIS shocks/struts, TPIS STB, TPIS adj. fuel press. regulator, 170 stat, B&M shift kit

3rdgeners in Europe: CLICK BELOW!

http://www.fbodyeurope.cz28.com



[This message has been edited by gregz28 (edited March 16, 2001).]

 

Here's mine. Hope it works lol.

<img>http://www.evilface.com/camaro/camaro%20ls.jpg</img>


------------------
EVILFACE

88 Camaro
Stock 305 TBI Auto,
Flowmaster Muffler, Full 3" Exhaust, B&M Megashifter
Runs A Blistering 16.5 @ 81.5 mph

&lt;img&gt;http://www.evilface.com/camaro/camarosig.jpg&lt;/img&gt;

 

Dang, am I doing something wrong here?


------------------
EVILFACE

88 Camaro
Stock 305 TBI Auto,
Flowmaster Muffler, Full 3" Exhaust, B&M Megashifter
Runs A Blistering 16.5 @ 81.5 mph

&lt;img&gt;http://www.evilface.com/camaro/camarosig.jpg&lt;/img&gt;

 

Here's mine

http://www.geocities.com/chevycamaro...ics/RSBack.JPG


[This message has been edited by Special K (edited March 16, 2001).]

 

edit: it no worky

[This message has been edited by EvilCartman (edited March 17, 2001).]

 

 

hey cruise12 WHAT ARE YOU DOING!?!
THAT IS SO CORRECT!




------------------
Pure Black 1992 RS Camaro
with blackouts and NITERDR on the plate
Open Element K&N
Chrome V covers
New Z28 spoiler
Kick a*s alpine cd player
SOUNDSTREAM Class A 10.2 Chrome Amp
2 SOUNDSTREAM SPL 12" Subwoofers
CHECK OUT MY SITE! http://www.angelfire.com/ne/92rscamaro/index.html

 

hey cruise12 WHAT ARE YOU DOING!?!
THAT IS SO CORRECT!




------------------
Pure Black 1992 RS Camaro
with blackouts and NITERDR on the plate
Open Element K&N
Chrome V covers
New Z28 spoiler
Kick a*s alpine cd player
SOUNDSTREAM Class A 10.2 Chrome Amp
2 SOUNDSTREAM SPL 12" Subwoofers
CHECK OUT MY SITE! http://www.angelfire.com/ne/92rscamaro/index.html

 

Heres mine: