It's *virtually* done.
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
It's *virtually* done.
*Disclaimer*
Do not post in this thread if you're only intent is to start crap with me on the terms of how my dad and I put this car together. We did it our way, and if you have a problem with it, then leave now and forever hold your peace.
For those who don't know what I'm talking about, we'll just leave it at that.
Now, I said I wouldn't make another thread about this car on TGO, but I changed my mind because of all the PM's I promised I'd send out. This is much easier. So basically as she sits tonight she's done. Tomorrow I gotta get out in the garage and put on the tail lights, grill, hood louvers, etc. And then on Monday I'm gonna go buy the stripes to put on here and then she'll OFFICIALLY be done.
These were taken tonight after the car was buffed and polished:

Do not post in this thread if you're only intent is to start crap with me on the terms of how my dad and I put this car together. We did it our way, and if you have a problem with it, then leave now and forever hold your peace.
For those who don't know what I'm talking about, we'll just leave it at that.
Now, I said I wouldn't make another thread about this car on TGO, but I changed my mind because of all the PM's I promised I'd send out. This is much easier. So basically as she sits tonight she's done. Tomorrow I gotta get out in the garage and put on the tail lights, grill, hood louvers, etc. And then on Monday I'm gonna go buy the stripes to put on here and then she'll OFFICIALLY be done.
These were taken tonight after the car was buffed and polished:

Last edited by BlueZee28; Feb 11, 2007 at 05:40 PM.
Supreme Member
iTrader: (7)
Joined: Mar 2005
Posts: 1,926
Likes: 3
From: mid GA
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
*Disclaimer*
Do not post in this thread if you're only intent is to start crap with me on the terms of how my dad and I put this car togethe. We did it our way, and if you have a problem with it, then leave now and forever hold your peace.
For those who don't know what I'm talking about, we'll just leave it at that.
Now, I said I wouldn't make another thread about this car on TGO, but I changed my mind because of all the PM's I promised I'd send out. This is much easier. So basically as she sits tonight she's done. Tomorrow I gotta get out in the garage and put on the tail lights, grill, hood louvers, etc. And then on Monday I'm gonna go buy the stripes to put on here and then she'll OFFICIALLY be done.
These were taken tonight after the car was buffed and polished:
Do not post in this thread if you're only intent is to start crap with me on the terms of how my dad and I put this car togethe. We did it our way, and if you have a problem with it, then leave now and forever hold your peace.
For those who don't know what I'm talking about, we'll just leave it at that.
Now, I said I wouldn't make another thread about this car on TGO, but I changed my mind because of all the PM's I promised I'd send out. This is much easier. So basically as she sits tonight she's done. Tomorrow I gotta get out in the garage and put on the tail lights, grill, hood louvers, etc. And then on Monday I'm gonna go buy the stripes to put on here and then she'll OFFICIALLY be done.
These were taken tonight after the car was buffed and polished:
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
I keep finding reasons to go upstairs and open the garage and take a look-see
My dad loves my ZR1's and he said he wants to buy a set for this car, so we'll see.
Member
iTrader: (2)
Joined: Jan 2006
Posts: 156
Likes: 1
From: Ripon WI
Car: 89 trans am gta; now 92 firebird
Engine: 350 tpi
Transmission: 700R4
Trending Topics
Senior Member
Joined: Nov 2003
Posts: 596
Likes: 0
From: Williamsport PA
Car: 1992 RS
Engine: 3.1
Transmission: Auto
Looks great nick. Can't wait to see it with the louvers on in the sunshine. BTW, is that the original color? It looks a little darker to me. Might be the lighting or my computer. Anyways, keep it up man.
Member
Joined: Mar 2005
Posts: 368
Likes: 0
From: London, Ontario
Car: 1991 Camaro RS
Engine: LS1
Transmission: T56
Axle/Gears: Tru-Track posi/Moser axles/4.10
I think all the cars you've done have turned out incredibly well and this one is not an exception. Well done Nick! Keep up the great work!
Supreme Member
iTrader: (5)
Joined: May 2004
Posts: 3,952
Likes: 1
From: Gardnerville, Nv.
Car: 00 Camaro SS
Engine: 5.7
Transmission: 6 speed
I love that blue! Car looks awesome, as I expected. Great job, now go get some more pics already.
I keep doing the same thing with the new Formula and all the new parts laying next to it.
I keep finding reasons to go upstairs and open the garage and take a look-see
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Joined: Oct 2006
Posts: 3,041
Likes: 8
From: West of Toronto
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Sir...........the car is beautiful......simply beautiful. Excellent job. Well done.
Member
iTrader: (3)
Joined: Jun 2003
Posts: 329
Likes: 0
From: Newmarket, NH
Car: 91Z28
Engine: 305
Transmission: WC T-5
Axle/Gears: 10 Bolt Posi, 3.08
Thats one beautiful car! Do you happen to know the paint code for that color? What color stripes are you going with?
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Thanks y'all
It's Ultra Blue Metallic. Paint code is WA 9591. The stripes will be silver on the lower one and either black or charcoal grey on the upper one. We kinda wanna do a charcoal color because you can't really see the black very well against the blue.
Yea it won't be 100% original, but then again we did change a few things along the way, like clear coating the tail lights and emblems, so it wouldn't hurt to change the color on one of the stripes.
Supreme Member
Joined: Apr 2004
Posts: 2,139
Likes: 0
From: MN
Car: 1986 Camaro SC (Supercool)
Engine: one composed of various metals
awesome job Nick - you're giving me the motivation to stop going to the bar so much and to start saving to get to work on my car this summer lol
Senior Member
iTrader: (1)
Joined: Jun 2006
Posts: 692
Likes: 1
From: Oviedo,Florida
Car: 86' Trans am
Engine: 85 LG4-non cc carb(building a 350)
Transmission: Rebuilt 700R4,vette servo,2200stall
Axle/Gears: 2.73 Posi
damn that car looks awsome i just found my new paint color
Supreme Member
iTrader: (17)
Joined: Jan 2005
Posts: 2,716
Likes: 3
From: Mobile, AL
Car: GTA
Engine: 383 HSR
Transmission: TH-700R4
Axle/Gears: 3.42
I love the color. I do not care for the "IROC -Z" decal. You have the nice GFX emblem so the big iroc one makes it look overkill you know?
Junior Member
Joined: Jan 2007
Posts: 12
Likes: 0
From: Denver, Colorado
Car: 1984 Z28 Camaro
Engine: L69 5.0 HO
Transmission: T-5
The car looks great. I wish I had the resources (and ability) to give my car at least a semi decent paint job. Keep up the good work and show us some more pics.
Member
Joined: Jul 2005
Posts: 190
Likes: 0
From: St. Louis
Car: 1987 Camaro Sport Coupe LT
Engine: 5.0 305 Code H
Transmission: 700R4
hey nick i thought the car was "totalled" hahaha looks great man, cant wait till it gets warm enough to go for a cruise before i leave for boot camp.
Supreme Member
iTrader: (7)
Joined: Mar 2005
Posts: 1,926
Likes: 3
From: mid GA
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
did you lay the iroc door stickers down? i just bought new ones for mine in black and im scared to put em on b/c i dont want em to b crooked also do you have the measurements where it is supposed to go back on, like it came from the factory? i have to take my car back to my painter for a couple touch ups and i think im just going to get him to lay em on there so i dont F it up.
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
did you lay the iroc door stickers down? i just bought new ones for mine in black and im scared to put em on b/c i dont want em to b crooked also do you have the measurements where it is supposed to go back on, like it came from the factory? i have to take my car back to my painter for a couple touch ups and i think im just going to get him to lay em on there so i dont F it up.
At least if the body shop guys screws it up you can make him fix it!
Supreme Member

Joined: Sep 2005
Posts: 2,151
Likes: 0
From: Osceola Indiana
Car: 92 RS(sold) 1989 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: ones that turn
Looks great Im so jealous Im glad you made another post, and ignored all the haters, get some pics of the whole thing I wanna see it
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 13
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Member
iTrader: (-1)
Joined: May 2003
Posts: 446
Likes: 0
From: Springfield, MO
Car: 89 Firebird Formula(Totalled), 91 C
Engine: Mild 350
Transmission: 700R4
Axle/Gears: 2.73 :-(
Man that sucks you got hit hard with the snow lol. We got like a inch or two here. Car looks great, do mine next lol.
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears






looks sexy! 