18" iroc wheels
Senior Member
Joined: Feb 2000
Posts: 536
Likes: 0
From: College Station/Spring, TX
do a search, and you should get plenty of results
------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-Jamex Springs...and thats just about it till summer!
Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana
http://ScreaminDeamin.cz28.com
------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-Jamex Springs...and thats just about it till summer!
Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana
http://ScreaminDeamin.cz28.com
Member
Joined: May 2001
Posts: 259
Likes: 0
From: Cataula, Ga.
www.performancewheeloutlet.com
They have the Iroc rims in 16",17",and 18"
polished or chrome. Also try the link the top of the page, www.thirdgenresource.com
they even have them in 20" versions.
They have the Iroc rims in 16",17",and 18"
polished or chrome. Also try the link the top of the page, www.thirdgenresource.com
they even have them in 20" versions.
Senior Member
Joined: Feb 2000
Posts: 879
Likes: 0
From: cinti
this thread is screaming for mr.iroc z's attention. Look for topics by him.
------------------
Jeremy
91 rs, convertible, K&N, Edelbrock open element cleaner, 3.73, B&M mega-shifter, goodmark cowl-induction hood,tinted windows,MacEwen Overlays
Coming soon...non red interior with 4th gen charcoal/grey seats
------------------
Jeremy
91 rs, convertible, K&N, Edelbrock open element cleaner, 3.73, B&M mega-shifter, goodmark cowl-induction hood,tinted windows,MacEwen Overlays
Coming soon...non red interior with 4th gen charcoal/grey seats
Supreme Member
iTrader: (1)
Joined: Jan 2000
Posts: 1,110
Likes: 6
From: san jose, ca
Car: 1990 IROC-Z (De-Badged-Carbon Hood)
Engine: Superram 383
Transmission: T-56 w/upgraded Viper Internals
Axle/Gears: 3.73 18x8 and 18x11 irocs
Jason,
It looks like ThirdGen source has the best prices for these wheels. I would reccomend that you the whole set with the front rim offset. Originally, the offset between the rear and front is diffeerent. The fronts have a more agressive stance.
I would also suggest polish rims, since the chromes look kinda gaudy. What you have to understand is that these rims will not look as good as they really can be., because they are mass produced.
I had my rims re-polished and painted. The difference was just amazing.
Then you also have to ensure that you take proper precautions with these rims. If your car is lowered, you will need to make some adjustments to the wheel wells and etc...too much to list here. I will soon be explaining the procdure on my web site.
good luck.
Tommy
Tommy
------------------
Mr. IROC-Z
WWW.IROCZDESIGNS.COM Because looks are everything.
It looks like ThirdGen source has the best prices for these wheels. I would reccomend that you the whole set with the front rim offset. Originally, the offset between the rear and front is diffeerent. The fronts have a more agressive stance.
I would also suggest polish rims, since the chromes look kinda gaudy. What you have to understand is that these rims will not look as good as they really can be., because they are mass produced.
I had my rims re-polished and painted. The difference was just amazing.
Then you also have to ensure that you take proper precautions with these rims. If your car is lowered, you will need to make some adjustments to the wheel wells and etc...too much to list here. I will soon be explaining the procdure on my web site.
good luck.
Tommy
Tommy
------------------
Mr. IROC-Z
WWW.IROCZDESIGNS.COM Because looks are everything.
Senior Member
Joined: Feb 2000
Posts: 879
Likes: 0
From: cinti
go to tommy's website and you will see what he is talking about....absolutely amazing car with perfect rims.
------------------
Jeremy
91 rs, convertible, K&N, Edelbrock open element cleaner, 3.73, B&M mega-shifter, goodmark cowl-induction hood,tinted windows,MacEwen Overlays
Coming soon...non red interior with 4th gen charcoal/grey seats
------------------
Jeremy
91 rs, convertible, K&N, Edelbrock open element cleaner, 3.73, B&M mega-shifter, goodmark cowl-induction hood,tinted windows,MacEwen Overlays
Coming soon...non red interior with 4th gen charcoal/grey seats
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
kah992
Engine/Drivetrain/Suspension Parts for Sale
2
Aug 19, 2015 02:55 PM
mustangman65_79
Body
3
Aug 11, 2015 03:17 PM