Web site address for aftermarket spoliers?
Thread Starter
Senior Member
Joined: May 2000
Posts: 679
Likes: 0
From: Colorado Springs
Car: 1991 Super Sport
Engine: 388 ci
Transmission: TH-700R4, 3500 Stall
Web site address for aftermarket spoliers?
I have searched all over for a web site that sells after market spoliers for 3rd gen camaros. I am looking for any kind of style I just am thinking of selling my stock one for a taller spolier.
Thanks
------------------
25th Anniversary Z28
My car can be seen in the "Readers Rides" section!
ET Class: PRO-OUTLAW 12.719 @ 108.24 MPH "4000 feet above sea level."
Corrected 11.918
Thanks
------------------
25th Anniversary Z28
My car can be seen in the "Readers Rides" section!
ET Class: PRO-OUTLAW 12.719 @ 108.24 MPH "4000 feet above sea level."
Corrected 11.918
Supreme Member
Joined: Jul 2000
Posts: 4,541
Likes: 2
Car: 1991 Corvette Coupe
Engine: L98
Transmission: 700R4/4L60 same trans different name
Thread Starter
Senior Member
Joined: May 2000
Posts: 679
Likes: 0
From: Colorado Springs
Car: 1991 Super Sport
Engine: 388 ci
Transmission: TH-700R4, 3500 Stall
I looked all over that web site and NOTHING about 3rd gen spoilers/wings, what gives? Does anyone have a link on that site to the wings?
Anyother sites?
Anyother sites?
Supreme Member
iTrader: (1)
Joined: Aug 1999
Posts: 2,842
Likes: 6
From: Rowlett, TX
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Click the banner on the top of this page for GT Auto Accessories. They make fiberglass aero wing spoilers for Firebirds.
------------------
1983 Firebird
TH700R4 Auto
Small Block 400
LG4 ECM, Intake, Carb, Distributor, etc.
Soon to be non-computer.
Clarion Head Unit 45X4
2 Pioneer 400W 12" Subs
Third Gen Performance
"A four cylinder is half an engine."
------------------
1983 Firebird
TH700R4 Auto
Small Block 400
LG4 ECM, Intake, Carb, Distributor, etc.
Soon to be non-computer.
Clarion Head Unit 45X4
2 Pioneer 400W 12" Subs
Third Gen Performance
"A four cylinder is half an engine."
Thread Starter
Senior Member
Joined: May 2000
Posts: 679
Likes: 0
From: Colorado Springs
Car: 1991 Super Sport
Engine: 388 ci
Transmission: TH-700R4, 3500 Stall
Thanks, but I need it for a CAMARO.
------------------
25th Anniversary Z28
My car can be seen in the "Readers Rides" section!
ET Class: PRO-OUTLAW 12.719 @ 108.24 MPH "4000 feet above sea level."
Corrected 11.918
------------------
25th Anniversary Z28
My car can be seen in the "Readers Rides" section!
ET Class: PRO-OUTLAW 12.719 @ 108.24 MPH "4000 feet above sea level."
Corrected 11.918
Supreme Member
iTrader: (1)
Joined: Aug 1999
Posts: 2,842
Likes: 6
From: Rowlett, TX
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Jegs sells the 91-92 Z28 style for around $150. Motion Glass sells a big F-40 style one, but they don't have a website, but they have an ad in the back of most chevy/GM magazines. As for American Sports Car Design, I think they only make one thirdgen wing, which is this fugly one:

I have never looked for Camaro spoilers on here, but try on http://www.wingswest.com/ they might have a couple. My best advice would be to do a search on altavista for camaro spoiler.
------------------
1983 Firebird
TH700R4 Auto
Small Block 400
LG4 ECM, Intake, Carb, Distributor, etc.
Soon to be non-computer.
Clarion Head Unit 45X4
2 Pioneer 400W 12" Subs
Third Gen Performance
"A four cylinder is half an engine."

I have never looked for Camaro spoilers on here, but try on http://www.wingswest.com/ they might have a couple. My best advice would be to do a search on altavista for camaro spoiler.
------------------
1983 Firebird
TH700R4 Auto
Small Block 400
LG4 ECM, Intake, Carb, Distributor, etc.
Soon to be non-computer.
Clarion Head Unit 45X4
2 Pioneer 400W 12" Subs
Third Gen Performance
"A four cylinder is half an engine."
Thread Starter
Senior Member
Joined: May 2000
Posts: 679
Likes: 0
From: Colorado Springs
Car: 1991 Super Sport
Engine: 388 ci
Transmission: TH-700R4, 3500 Stall
Wow, I like the spoiler in that pic above on the firebird. Do you think that would fit a 92 Z28? Also, at wings west they have a wrap around type wing, looks HOT, I may go with that. Cool ideas, thanks Ward. Now, just to sell my stock Z28 1992 spoiler. What is the asking price for that?
------------------
25th Anniversary Z28
My car can be seen in the "Readers Rides" section!
ET Class: PRO-OUTLAW 12.719 @ 108.24 MPH "4000 feet above sea level."
Corrected 11.918
------------------
25th Anniversary Z28
My car can be seen in the "Readers Rides" section!
ET Class: PRO-OUTLAW 12.719 @ 108.24 MPH "4000 feet above sea level."
Corrected 11.918
Trending Topics
Senior Member
iTrader: (3)
Joined: Oct 1999
Posts: 535
Likes: 0
From: Reno, Nevada
Car: 1991 Formula L98
Engine: 350
Transmission: T-56
Axle/Gears: 3.73:1
<font face="Verdana, Arial" size="2">Originally posted by Yellow Camaro:
I too have been looking at spoilers. Can someone tell me what year(s), model(s this spoiler came stock?
</font>
I too have been looking at spoilers. Can someone tell me what year(s), model(s this spoiler came stock?
</font>
Thread Starter
Senior Member
Joined: May 2000
Posts: 679
Likes: 0
From: Colorado Springs
Car: 1991 Super Sport
Engine: 388 ci
Transmission: TH-700R4, 3500 Stall
You would not need your 3rd brake light anymore, just like the 91-92 Z28's. I have the 3rd brake light in the rear window, you don't have that in the other years then just don't have one I guess.
Supreme Member
iTrader: (1)
Joined: Aug 1999
Posts: 2,842
Likes: 6
From: Rowlett, TX
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Asking price for that spoiler pictured on the T/A is $357.50. A rip-off if you ask me, cus i still think its ugly. But it should fit any thirdgen, since the deck-lid is the same all years, camaro or firebird. You might have to drill holes and fill old holes, but thats about it.
------------------
1983 Firebird
TH700R4 Auto
Small Block 400
LG4 ECM, Intake, Carb, Distributor, etc.
Soon to be non-computer.
Clarion Head Unit 45X4
2 Pioneer 400W 12" Subs
Third Gen Performance
"A four cylinder is half an engine."
------------------
1983 Firebird
TH700R4 Auto
Small Block 400
LG4 ECM, Intake, Carb, Distributor, etc.
Soon to be non-computer.
Clarion Head Unit 45X4
2 Pioneer 400W 12" Subs
Third Gen Performance
"A four cylinder is half an engine."
Thread Starter
Senior Member
Joined: May 2000
Posts: 679
Likes: 0
From: Colorado Springs
Car: 1991 Super Sport
Engine: 388 ci
Transmission: TH-700R4, 3500 Stall
Yes, your right, I would have trouble paying that much for any wing. The new wing I am getting after someone buys my Z28 aero wing, is the "wrap around" style for $249. That is still a high price, but I want a different spoiler than I have seen.
------------------
25th Anniversary Z28
My car can be seen in the "Readers Rides" section!
ET Class: PRO-OUTLAW 12.719 @ 108.24 MPH "4000 feet above sea level."
Corrected 11.918
------------------
25th Anniversary Z28
My car can be seen in the "Readers Rides" section!
ET Class: PRO-OUTLAW 12.719 @ 108.24 MPH "4000 feet above sea level."
Corrected 11.918
Thread Starter
Senior Member
Joined: May 2000
Posts: 679
Likes: 0
From: Colorado Springs
Car: 1991 Super Sport
Engine: 388 ci
Transmission: TH-700R4, 3500 Stall
Ok, check this site out for camaro wings.
www.erebunicorp.com/wings/chevcamaro82.htm
I am going with the wrap around style..
[This message has been edited by GOFASTER (edited June 29, 2001).]
www.erebunicorp.com/wings/chevcamaro82.htm
I am going with the wrap around style..
[This message has been edited by GOFASTER (edited June 29, 2001).]
Senior Member
Joined: Oct 2000
Posts: 762
Likes: 0
From: Littleton, CO
Car: 1986 Iroc Camaro
Engine: 305 TPI
Transmission: Th700R4 Jr. Raptor
You know, i like the stock spoiler i have on my IROC. its a small little lift, i know you know what im talking about.
Does anyone sell a part which would extend this a little, to make it more functional? or does anyone know how expensive it is to have a custom peice made by someone, or where i could find someone who could make a custom peice?
------------------
1986 IROC Camaro
305 TPI "LB9"
3.23 gears
Doesn't know enough about cars.
AIM: jesusathome
Does anyone sell a part which would extend this a little, to make it more functional? or does anyone know how expensive it is to have a custom peice made by someone, or where i could find someone who could make a custom peice?
------------------
1986 IROC Camaro
305 TPI "LB9"
3.23 gears
Doesn't know enough about cars.
AIM: jesusathome
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Exterior Parts for Sale
1
Sep 22, 2015 08:28 PM
IROCZDAVE (88-L98)
Exterior Parts for Sale
0
Sep 6, 2015 06:23 AM




) 
