I was cleaning my wheels the other day and noticed what looked like white debries on the surface. As I looked closer, it looked like the clear coat is fading, or cracking. Looks all dried up, and it wont seem to come off. Can I repair where the clear coat is bad, or do I have to do the whole wheel? I was thinking some of that Aircraft Paint Remover should do it, but I dont wanna mess it up, so I thought I'd ask for some advice. Thanks,

 

Strip it (yep with aircraft paint remover) and you can recoat it.. or leave it as is.

------------------
91 Z28
Best Time Slip:
60' - 2.098
1/8 - 9.137 , MPH - 76.21
1/4 - 14.213, MPH - 97.55

Mods: SLP Exhaust, umm...nothing else..sorry

Stereo: Alpine 855, Infinity Kappas all around, Infinity 150x2 amp (POS), Infinity Perfect 10 in hatch.

Webpage coming soon.
ICQ: 1437212
AOL: normalmatt9

 

mine looks like some dummy got the car dirty and sprayed clear coat over the mud. I can take a pressure washer to that thing and the dirt is literaly under the clear coat. Those finger prints and dirty spots will not come off. That or someone waxed it with one of those year long car waxs when it was dirty.

Never buying a black car again.

 

If I use the aircraft paint remover, will it also remove the black paint between the fins?

 

yes.