Wet-Look ClearCoat??
Thread Starter
Banned
iTrader: (1)
Joined: Feb 2000
Posts: 1,198
Likes: 1
From: Bound Brook, NJ USA
Car: 89 IROC-Z
Engine: 383
Transmission: 700R4
Wet-Look ClearCoat??
My father was telling me that he was talking to someone at a local cruise night last week and they told him that there is a new clear coat out that will give your finish a wet look. Anyone know about it?
------------------
Riccioli Performance Motorworks
--RPM Racing--
Getting there.....383 with Super Ram, Bosch 24# SVO's, MSD, Edelbrock 58 mm TB, 700R4 tranny, Eibach springs, Koni 12 way adjustable shocks and struts, and more!! Now let's pray it runs when it's all back together!!!!
------------------
Riccioli Performance Motorworks
--RPM Racing--
Getting there.....383 with Super Ram, Bosch 24# SVO's, MSD, Edelbrock 58 mm TB, 700R4 tranny, Eibach springs, Koni 12 way adjustable shocks and struts, and more!! Now let's pray it runs when it's all back together!!!!
Banned
Joined: May 2001
Posts: 940
Likes: 0
From: Hell, Michigan
Supreme Member
Joined: Oct 1999
Posts: 3,625
Likes: 1
From: Happy Valley, Oregon
If your car is straight and the clearcoat is colorsanded and polished properly, then I don't see how it is possible to have it look any "wetter". Sounds like a marketing ploy to me.
Supreme Member
iTrader: (1)
Joined: Apr 2000
Posts: 5,321
Likes: 4
From: Northern CA.
Car: '82 Z28
Engine: 350
Transmission: TH400 4,000 stall
Axle/Gears: Currie 9", 4.56 gears
I just finished painting a dune buggy last week for a friend of mine... This is the top of the back fender, wet enough looking? hehe I haven't wetsanded or buffed it out yet. That's just your regular run of the mill clearcoat from PPG that they stopped selling in California a year or two ago.
Senior Member
Joined: Feb 2000
Posts: 536
Likes: 0
From: College Station/Spring, TX
<font face="Verdana, Arial" size="2">Originally posted by EvilCartman:
That's just your regular run of the mill clearcoat from PPG that they stopped selling in California a year or two ago.
</font>
That's just your regular run of the mill clearcoat from PPG that they stopped selling in California a year or two ago.
</font>
you mean the DCU 2020 that takes the DU5 hardener right?
------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-Jamex Springs...and thats just about it till summer!
Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana
http://ScreaminDeamin.cz28.com
[This message has been edited by ScreaminDeamin85Z (edited September 05, 2001).]
Supreme Member
iTrader: (1)
Joined: Apr 2000
Posts: 5,321
Likes: 4
From: Northern CA.
Car: '82 Z28
Engine: 350
Transmission: TH400 4,000 stall
Axle/Gears: Currie 9", 4.56 gears
Think that's what it was, friend of mine had a half gallon left and he let me use some of it it on the buggy. I tried getting hardner for a different brand of clear I had and couldn't 
I'll check on the numbers tomorrow.
I'll check on the numbers tomorrow. 
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
NW Indiana and South Chicago Suburb
14
Jan 31, 2025 05:10 PM
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
Jan 28, 2016 09:58 PM
