i used the scanner here at the school, since it is better than the one at my house. heres a link to the dir.
http://screamindeamin.cz28.com/newimages

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com

 

Nice ride! Is that your 85 or your 89?

Is your 85 the one with all of the engine mods? What did you do with the computer? Mine runs like a piece of crap. Our motors are very similar, but I'm still running the stock computer and 305 chip until I get around to swapping to a 165 ECM. I just wanted to see what you've done.

------------------

The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah

 

Nice ride man, first camaro i've seen with cowl that i acutally liked. :-)

 

no that is the 89 in the pics, the 85 is wrecked. the motor will soon be in the 89 since i just got my hands on a 6 speed. with the auto the car ran pretty good, but i never got around to modifying the chip.

thanks alot predator!

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com

 

nice car!

------------------
91 Z28
Best Time Slip:
60' - 2.098
1/8 - 9.137 , MPH - 76.21
1/4 - 14.213, MPH - 97.55
Performace Mods: B&B Exhaust, few free mods.
Appearance Mods: SS wheels, 2.5" Cowl Hood... New 100% Black paint job, Clear Side Marker Lights
Stereo: Alpine 855, Infinity Kappas all around, Infinity 150x2 amp (POS), Infinity Perfect 10 in hatch.
Pictures are Here
ICQ: 1437212
AOL: normalmatt9

 

Nice! The new ScreaminDreamin is looking good!

------------------
Third Gen Project
1989 305 tbi Camaro RS Red/Red
Ram Air II Hood
Centerline Champ 500 Rims
Edelbrock Open Element
MacEwen White Faced Guages

 

Looking good man!!!
Later
Mike

------------------
Check out My Car Pics http://albums.photo.epson.com/j/Albu...667&a=13599419

Gran Turismo Americano "The Ultimate Firebird"
Smokin 1989 GTA- Bone stock except for exhaust. (no catalytic-stainless pipe into Flowmaster 2 chamber) & AC Delco Rapid Fire Plugs

 

I have alomst the same identical car, same color, same rims(what size do u got?). the only difference is that i have a daytona hood.. nice car

 

the rims are 17"

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com

 

cool. i got 17x9's. my back wheels rub like hell every bump i hit..do u have that prob too?

 

nope mine dont rub at all and thats with 275/40's. maybe your rear shocks are bad.

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com

 

thats what im thinkin my rear tires are 255/55 so that might be why too. But the shocks do feel a little week.

 

Thats awesome, those wheels look sweet too. Nice ride!

 

what kind of wheels are those i want em

------------------
If its not a camaro or corvette then what is it really?

 

nice ride man. that hood looks HUGE but awesome

 

Frost: the wheels are Centerline Scorpion's 17x9 1/2

89Irocz23: the hood is huge but why be ordinary it definatly stands out ina crowd.

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com

 

beautiful!
i love big billets on a 3rd gen.
im hoping to get a 82-84 SC for autoX
i wanna throw on it some 17x9.5" center line galaxy's...but if i dont have the money i will have to settle for ZR1s possibly

im about (in a couple of months) gonna put some Concept neepter T-Rex truck 18x8" on my 99 Xtreme, they are sum deeper than normal dish fat 5stars

 

oh man....the next set of rims i buy will be the galaxy's!! i want them sooo bad. i wish i had bought those but they werent out yet when i bought these. i would like to take mine to an auto-x event and see how i do, from what i've read i really need a power steering cooler.

------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana

http://ScreaminDeamin.cz28.com