My Skinny Boy Lighting HID projector upgrade
Thread Starter
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 14
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
My Skinny Boy Lighting HID projector upgrade
Hey everyone. I know I haven't been on here much, but it doesn't mean I haven't been playing with my cars.
Last fall I ordered an HID projector beam conversion headlight set up from Skinny Boy lighting http://skinnyboylighting-com.webs.com/
I didn't much care for the looks of just a single upgraded housing on each side, so for the sake of uniformity, I had Kyle build me a set of "Dummy" projector housings for the high beam location.
This set up is 55W 5000k bulb temp with amber led Demon Eyes in each of the housings. Chrome inner housings with matte silver shrouds to reduce some of the "bling" of the all chrome housings.
I have the demon eye set up and wired on as parking lights and turnsignals to also help facilitate my next project I'll be showing off soon.
Huge improvement over the stock lights, and I really like the way it looks as well.
Some people like the look, others don't but that is how this car has been the whole way. Enjoy and feel free to ask questions. I don't get on here often, anymore, but I'll try to be quick with reply's.










Last fall I ordered an HID projector beam conversion headlight set up from Skinny Boy lighting http://skinnyboylighting-com.webs.com/
I didn't much care for the looks of just a single upgraded housing on each side, so for the sake of uniformity, I had Kyle build me a set of "Dummy" projector housings for the high beam location.
This set up is 55W 5000k bulb temp with amber led Demon Eyes in each of the housings. Chrome inner housings with matte silver shrouds to reduce some of the "bling" of the all chrome housings.
I have the demon eye set up and wired on as parking lights and turnsignals to also help facilitate my next project I'll be showing off soon.
Huge improvement over the stock lights, and I really like the way it looks as well.
Some people like the look, others don't but that is how this car has been the whole way. Enjoy and feel free to ask questions. I don't get on here often, anymore, but I'll try to be quick with reply's.










Joined: Aug 2011
Posts: 2,381
Likes: 10
From: San Diego, California For Now
Car: 88 Formula, 90 Iroc RIP, 92 RS Sold
Engine: 305 to 350
Transmission: 700r4
Axle/Gears: 10 Bolt
Re: My Skinny Boy Lighting HID projector upgrade
Def getting some next payday
What are the inner high beams lights do are they still functional lights or just for show
What are the inner high beams lights do are they still functional lights or just for show
Thread Starter
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 14
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: My Skinny Boy Lighting HID projector upgrade
... There is a method to my madness, just not done with it. Joined: Aug 2011
Posts: 2,381
Likes: 10
From: San Diego, California For Now
Car: 88 Formula, 90 Iroc RIP, 92 RS Sold
Engine: 305 to 350
Transmission: 700r4
Axle/Gears: 10 Bolt
Re: My Skinny Boy Lighting HID projector upgrade
I see I seen the video you have pretty cool I like the demon eye vs the Halo never thought the Halo fit lines of the car when om
Supreme Member


Joined: Apr 2010
Posts: 1,027
Likes: 11
From: Modesto, California
Car: 88 Firebird Formula
Engine: LO5 5.7 TBI/Ebl Flash
Transmission: 700R4
Axle/Gears: 2.73 stock rear end
Re: My Skinny Boy Lighting HID projector upgrade
NICE!!!!!! I seriously cant see **** with these halogen lights (not to mention they are completely angled off incorrectly) Does he make some retrofit kits for firebirds/trans ams?
Thread Starter
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 14
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: My Skinny Boy Lighting HID projector upgrade
He actually just came out with some. Check out his site. He can make them any way you want them.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM






