Xenons on a thirdgen?
Thread Starter
Supreme Member
iTrader: (1)
Joined: Aug 1999
Posts: 2,842
Likes: 6
From: Rowlett, TX
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Xenons on a thirdgen?
I found this on ebay:
http://cgi.ebay.com/ebaymotors/aw-cg...item=599358678
they are for camaros, but has anyone ever used these? Do they look like real xenons, or the cheesy blue lights? I want xenon lights which look like the lights on BMWs and Mercedes'. I hate the gay ***** blue tinted lights... Also, does anyone know if this is even possible on a firebird?
http://cgi.ebay.com/ebaymotors/aw-cg...item=599358678
they are for camaros, but has anyone ever used these? Do they look like real xenons, or the cheesy blue lights? I want xenon lights which look like the lights on BMWs and Mercedes'. I hate the gay ***** blue tinted lights... Also, does anyone know if this is even possible on a firebird?
Supreme Member
Joined: Aug 2001
Posts: 1,091
Likes: 0
From: Mississauga, Ontario, Canada
Car: 1995 Formula/2001 GTP
Engine: 5.7 LT1/3.8 Supercharged
Yeah...they are gas bulbs...with diamond cut lenses, they are the real deal and they're cheap...Im ordering them in a week or two directly form the company that makes em
Supreme Member
iTrader: (1)
Joined: Jan 2000
Posts: 1,110
Likes: 6
From: san jose, ca
Car: 1990 IROC-Z (De-Badged-Carbon Hood)
Engine: Superram 383
Transmission: T-56 w/upgraded Viper Internals
Axle/Gears: 3.73 18x8 and 18x11 irocs
Yeah.....but these are not HID. You need to get the actual Xenon amplifier and that is $425! These lights you are bidding on are not REAL XENON!!!!!!!!!!!!
So in order to make them real Xenon.....you need to puchase the housing here:http://cgi.ebay.com/ebaymotors/aw-c...&item=599358678
Then you need to purchase the controllers here:
http://cgi.ebay.com/ebaymotors/aw-cg...372043&r=0&t=0
Then you will have real XENON's!
Tommy
So in order to make them real Xenon.....you need to puchase the housing here:http://cgi.ebay.com/ebaymotors/aw-c...&item=599358678
Then you need to purchase the controllers here:
http://cgi.ebay.com/ebaymotors/aw-cg...372043&r=0&t=0
Then you will have real XENON's!
Tommy
I have a pair of Diamond( crystal ) cut 4x6 headlight housings if you want them . They were going to go on my Iroc before it was wrecked , now I cant use them . I would sell for $55 for the pair , I paid $42 a piece new .
I have been thru several different bulbs and the only bulb that looks like the real deal is PIAA's newly released super plasma 55/60 watt bulb . There is no noticeable difference from the BMW's and Audi's and the super plasma. It has a very faint purplish blue tint to the pure white light , just like the HID's . The bulbs are little pricey though @ $85 a pair , but you definately get what you pay for . 100% of the cheapie supposed HID looking or hyperwhite labeled bulbs have been nothing more than fake looking blue bulb that burns out after a couple months . The light cast by the cheaper bulbs imo sucks as well .
I have been thru several different bulbs and the only bulb that looks like the real deal is PIAA's newly released super plasma 55/60 watt bulb . There is no noticeable difference from the BMW's and Audi's and the super plasma. It has a very faint purplish blue tint to the pure white light , just like the HID's . The bulbs are little pricey though @ $85 a pair , but you definately get what you pay for . 100% of the cheapie supposed HID looking or hyperwhite labeled bulbs have been nothing more than fake looking blue bulb that burns out after a couple months . The light cast by the cheaper bulbs imo sucks as well .
Supreme Member
iTrader: (1)
Joined: Jan 2000
Posts: 1,110
Likes: 6
From: san jose, ca
Car: 1990 IROC-Z (De-Badged-Carbon Hood)
Engine: Superram 383
Transmission: T-56 w/upgraded Viper Internals
Axle/Gears: 3.73 18x8 and 18x11 irocs
90Z28.......not to sound messed up or anything, but $55 is too expensive for just your housings. This guy on ebay is selling them and the bulbs for $43 total.
I will buy the housing from you for $20?
Tommy
I will buy the housing from you for $20?
Tommy
$55 is not too expensive for just the housings. The next set I'm getting will probably run $80 just for the housings because I want aluminum/glass housings, not the cheap plastic crap most of them are made of.
Junior Member
Joined: Dec 2000
Posts: 77
Likes: 0
From: Philadelphia, PA USA
Car: 1989 Firebird Formula
Engine: 350
Transmission: 700R4
I have the hella conversion housings which were about $65 for the pair with stock h4 bulbs. I then got rid of the stock bulbs and got a pair of piaa super plasma's which were about $75...a little bit expensive but very nice bulbs. $55 isn't a bad price for the housings.
Trending Topics
Supreme Member
iTrader: (1)
Joined: Jan 2000
Posts: 1,110
Likes: 6
From: san jose, ca
Car: 1990 IROC-Z (De-Badged-Carbon Hood)
Engine: Superram 383
Transmission: T-56 w/upgraded Viper Internals
Axle/Gears: 3.73 18x8 and 18x11 irocs
Well....you guys got ripped off then cause I can get two new housings (aluminum/GLASS) and two bulbs for $43.
Tommy
Tommy
well then Mr. IROC-Z, why don't you share your knowledge and witty techniques to find a better deal........rather than telling everyone they were ripped off!
try sharing your knowledge rather than putting people down, you always get what you pay for.
try sharing your knowledge rather than putting people down, you always get what you pay for.
Don't know if anyone noticed but the bulbs in that kit on ebay are 100/90watt bulbs which if I'm right is illegal and that would blind the hell out of other drivers. The wattage is 60/55 I believe but I've been wrong before so you might want to check your local laws to see if your going to have to buy new bulbs.
MR.IROCZ: How did I get ripped off? I said the next set were probably gonna run about $80. If you can help save me a few dollars on a set of *diamond cut; aluminum/glass* H4 conversion housings, I'd be in your debt.
Originally posted by Mr. IROC-Z
90Z28.......not to sound messed up or anything, but $55 is too expensive for just your housings. This guy on ebay is selling them and the bulbs for $43 total.
I will buy the housing from you for $20?
Tommy
90Z28.......not to sound messed up or anything, but $55 is too expensive for just your housings. This guy on ebay is selling them and the bulbs for $43 total.
I will buy the housing from you for $20?
Tommy
Like Kandied said , you get what you pay for ...been there , done that and wasted too much money on the cheapie stuff .
Member
Joined: Nov 2003
Posts: 363
Likes: 0
From: UT
Car: 88 Camaro S/C
Engine: 350
Transmission: 700-R4
Bump!!! I found some sets on ebay, are these any good? All these links are out of date. One of my headlights died so I'd rather just replace them with xenon style
Member
Joined: Jun 2004
Posts: 445
Likes: 0
Car: 1991 pontiac firebird
Engine: 305 V8 flo-pro exhaust
Transmission: automatic 700r4 4speed
Axle/Gears: stock 2.73's :(
i had the HID headlights for my 84 z28 i had suped up b4 i sold
i thought they were prety cool n ppl always complemented me on them
i thought they were prety cool n ppl always complemented me on them
Supreme Member
iTrader: (1)
Joined: Jan 2000
Posts: 1,110
Likes: 6
From: san jose, ca
Car: 1990 IROC-Z (De-Badged-Carbon Hood)
Engine: Superram 383
Transmission: T-56 w/upgraded Viper Internals
Axle/Gears: 3.73 18x8 and 18x11 irocs
wow...blast from the past...man, I sounded like an assholle 4 years ago. LOL!
Tommy
Tommy
Supreme Member
Joined: Aug 2004
Posts: 4,168
Likes: 3
From: Marietta, GA
Car: '91 Firebird Convertible
Engine: 305 TBI (LO3)
Transmission: 700r4, Vette Servo
Axle/Gears: 3.27 9 Bolt, PBR disks
Originally posted by Mr. IROC-Z
wow...blast from the past...man, I sounded like an assholle 4 years ago. LOL!
Tommy
wow...blast from the past...man, I sounded like an assholle 4 years ago. LOL!
Tommy
~ducks and runs~
Supreme Member

Joined: Feb 2004
Posts: 1,159
Likes: 2
From: Munster IN
Car: 92 RS, 05 GTO (sold), 10 TL AWD
Engine: 383 HSR w/DSC1
Transmission: 700r4
Axle/Gears: Strange S60/3.73
does anyone have these projector lights on there car? would be curious to see what they look like on the car. that is if they look out of place.
http://www.matrixracing.com/BI4364Details.htm
http://www.matrixracing.com/BI4364Details.htm
Here's links to some other posts about HID. Some good reading, check it out if you are interested. To sum it up I think everyone should be aware of the difference between true HID and the cheaper conversions like H4. The most important thing to know is how much wattage your system can handle. The cheaper conversions usually use more wattage to make the light brighter, and this can cause unwanted heat that can possibly damage the harness connector, the wiring, etc, possibly causing a fire. No Joke.
https://www.thirdgen.org/techbb2/sho...&highlight=HID
https://www.thirdgen.org/techbb2/sho...&highlight=HID
https://www.thirdgen.org/techbb2/sho...&highlight=HID
https://www.thirdgen.org/techbb2/sho...&highlight=HID
Supreme Member
Joined: Sep 2001
Posts: 4,231
Likes: 1
From: Manassas, VA
Car: 89 Formula Firebird
Engine: 305 - Demon 525
Transmission: 700R4
ahh... lights so that you can see everything on the road but the blinded driver infront of you cant see a thing because of your hi watt light system. I vote for stock lights, or some mod thats not so.... blinding. Sometimes I want to follow those people home and smash out their expensive head lights... but we all know I wouldnt do such a thing.. hehe....
Supreme Member
iTrader: (1)
Joined: Jun 2001
Posts: 3,109
Likes: 25
From: Tacoma, Wa
Car: '91 TA vert
Engine: turboLSx
Transmission: T56
Axle/Gears: 3.23
Originally posted by 1992rs/ss
does anyone have these projector lights on there car? would be curious to see what they look like on the car. that is if they look out of place.
http://www.matrixracing.com/BI4364Details.htm
does anyone have these projector lights on there car? would be curious to see what they look like on the car. that is if they look out of place.
http://www.matrixracing.com/BI4364Details.htm
Supreme Member
Joined: Jun 2001
Posts: 3,238
Likes: 4
From: Calgary, Alberta, Republic of Western Canada
Car: 1986 Sport Coupé
Engine: 305-4v
Transmission: 700R4 and TransGo2
Originally posted by Mr. IROC-Z
wow...blast from the past...man, I sounded like an assholle 4 years ago. LOL!
Tommy
wow...blast from the past...man, I sounded like an assholle 4 years ago. LOL!
Tommy
But most of us really like folks who will admit their faults. You're probably a pretty good guy
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
Mutillator
Exterior Parts for Sale
2
Oct 1, 2015 06:05 PM








