Chalk up another dash! d@mn winter!!!
Thread Starter
Member

Joined: Jan 2002
Posts: 166
Likes: 0
From: Cherry Hill, NJ
Car: 89 RS Convertible (Original owner)
Engine: 305
Transmission: 700R4
Axle/Gears: 3.73 With Zexel Torsen Ltd. slip
Chalk up another dash! d@mn winter!!!
Went to uncover my convertible yesterday to take it out for a quick spin, and much to my dissappointment the dash now has a huge crack running from the drivers side speaker grille to the steering wheel.
I've read other members posts about this happening to them, but never thought it would happen to me, I've owned the car ('89) since new, and it has been through some real cold weather before without incident. My only saving grace is that I have a replacement dash pad that I yanked out of another RS about 4 weeks ago. I'm not as pissed about this as I should be, but to anyone who keeps their cars in cold temps, be warned. I didn't think this would happen to me, but it did.
Man, I can't wait for spring!!
I've read other members posts about this happening to them, but never thought it would happen to me, I've owned the car ('89) since new, and it has been through some real cold weather before without incident. My only saving grace is that I have a replacement dash pad that I yanked out of another RS about 4 weeks ago. I'm not as pissed about this as I should be, but to anyone who keeps their cars in cold temps, be warned. I didn't think this would happen to me, but it did.
Man, I can't wait for spring!! Trending Topics
if you can get one at a scrap yard more power to you. i know if you buy it new you will pay out of the @$$ for it. when my buddies cracked we went to our local u pull it and picked up a mint condition one up for 16 bucks.
Originally posted by 1986redbird
I'll be replacing the pad as soon as my new (used) one gets here, should be this week. you can have the thing if you want it.
I'll be replacing the pad as soon as my new (used) one gets here, should be this week. you can have the thing if you want it.
Thanks,
Steve
Joined: Jan 2001
Posts: 3,188
Likes: 59
From: Conroe, TX
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
warning:
if you post in a thread about being lucky that it hasn't happened to you, and that it wouldn't happen to you.....be warned....it will
I am living proof. I posted in the first of these threads a while back and went out the next day....cracked dash
if you post in a thread about being lucky that it hasn't happened to you, and that it wouldn't happen to you.....be warned....it will
I am living proof. I posted in the first of these threads a while back and went out the next day....cracked dash
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
I posted I was lucky in a previous thread, no cracks yet. How ghetto will it look if I just take it out and drive without a dashpad?
Originally posted by MetalliCamaroRS
I posted I was lucky in a previous thread, no cracks yet. How ghetto will it look if I just take it out and drive without a dashpad?
I posted I was lucky in a previous thread, no cracks yet. How ghetto will it look if I just take it out and drive without a dashpad?
About a 9.5
89cmrodriver i need a dash pad too...anyone wanna give me one for free
where do you live? um.. this summer im prolly getting a new one for mine so if you want an old crack one maybe i can seel it to you enough for shiping and handling or somthing to get to your crib..?
where do you live? um.. this summer im prolly getting a new one for mine so if you want an old crack one maybe i can seel it to you enough for shiping and handling or somthing to get to your crib..?
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
Originally posted by FLYNLOW92rs
On a Scale of 1 to 10
About a 9.5
On a Scale of 1 to 10
About a 9.5
Better than cracking mine.
Thread Starter
Member

Joined: Jan 2002
Posts: 166
Likes: 0
From: Cherry Hill, NJ
Car: 89 RS Convertible (Original owner)
Engine: 305
Transmission: 700R4
Axle/Gears: 3.73 With Zexel Torsen Ltd. slip
I picked up my replacement one from a local yard for $60.00. It came out of an '89 RS, and the pad is mint!!
Clean dash pads are out there, you just gotta keep an eye out for them. I'm gonna be picking up another one this weekend from the same yard I got the first one from (he's got a lot of third gens there!)
Clean dash pads are out there, you just gotta keep an eye out for them. I'm gonna be picking up another one this weekend from the same yard I got the first one from (he's got a lot of third gens there!) I am looking for a cracked dashpad also if anyone else wants to donate one. I am going to try to recover it correctly myself. I need to drive my car every day and there isnt even a singe freakin 3rd gen in the 2 parts yards here in Dubuque. So if anyone wants to donate(I will gladly pay shipping) one that has some cracks that would be great!
Senior Member
iTrader: (1)
Joined: Sep 2000
Posts: 543
Likes: 0
From: long island
Car: 90 Formula, 02 ws6
Engine: 305 tpi, ls1
Transmission: 700r4, t-56
Axle/Gears: stock posi 2.73, 12 bolt with 4.11s
ya same thing happened to my friend and his 84 S/E
he just came outside and saw a huge crack right down the middle
mine was cracked on the driverside and i got one out of a gta for $50
he just came outside and saw a huge crack right down the middle
mine was cracked on the driverside and i got one out of a gta for $50
i have a neato carpet cover on my dash... even tho its not cracked.. came with the car, and i kinda like it.. the only drawback is when i hit it hard, the cover comes flying off into my face... i need to secure it there
Why not get a fiberglass dash, get it rhyno lines (to match the old dash's look) and just tweak a few things on it than bingo you get a stock looking dash, no one will know it's not, it wont crack and it lighter??
http://www.hairyglass.com/camaro.html
http://www.hairyglass.com/camaro.html
Originally posted by SuperchargedRS
Why not get a fiberglass dash, get it rhyno lines (to match the old dash's look) and just tweak a few things on it than bingo you get a stock looking dash, no one will know it's not, it wont crack and it lighter??
http://www.hairyglass.com/camaro.html
Why not get a fiberglass dash, get it rhyno lines (to match the old dash's look) and just tweak a few things on it than bingo you get a stock looking dash, no one will know it's not, it wont crack and it lighter??
http://www.hairyglass.com/camaro.html
how much does that cost?
Originally posted by SuperchargedRS
send em' a e-mail. I havent done business with that company before, but when I get back to the CA I will be ordering that item for my Camaro. So I would like to know when ya find out.
send em' a e-mail. I havent done business with that company before, but when I get back to the CA I will be ordering that item for my Camaro. So I would like to know when ya find out.
i just sent them an email.
Supreme Member
Joined: Jul 2002
Posts: 1,700
Likes: 0
From: Wall Township, NJ
Car: 1987 "1991 Z" Sport Coupe
Engine: LG4
Transmission: TH700R4
Originally posted by MetalliCamaroRS
I posted I was lucky in a previous thread, no cracks yet. How ghetto will it look if I just take it out and drive without a dashpad?
I posted I was lucky in a previous thread, no cracks yet. How ghetto will it look if I just take it out and drive without a dashpad?
44 dollar ticket.....and im suprised cop didnt say anything about having it off...... ............................WELCOME TO THE CLUB.
...........................
some one should make a pole to see how much peoples dash has cracked this winter, i bet its alot.
i feel your pain though.
........................... some one should make a pole to see how much peoples dash has cracked this winter, i bet its alot.
i feel your pain though.
Supreme Member
iTrader: (2)
Joined: Jun 2001
Posts: 1,878
Likes: 0
From: northeast ohio
Car: 2000 astro
Engine: 4.3
Transmission: A4
Axle/Gears: 7.5 with 3.42 gears
the dash pad in my red sport coupe actually has a dent in it.
just above where the tach would be, on the flat surface, is a large indentation approx 2 inches in diameter, and 1/8 inch deep.
very noticeable, and it's cracked everywhere.
just above where the tach would be, on the flat surface, is a large indentation approx 2 inches in diameter, and 1/8 inch deep.
very noticeable, and it's cracked everywhere.
Supreme Member
Joined: Jul 2002
Posts: 1,700
Likes: 0
From: Wall Township, NJ
Car: 1987 "1991 Z" Sport Coupe
Engine: LG4
Transmission: TH700R4
have mine off for the time being.....doin some wiring and stuff.....had it sittin on the garage for about 1 1/2 week now
so i figured i would bring it into the nice warm house until i get it back on
so i figured i would bring it into the nice warm house until i get it back on Member
Joined: Aug 2001
Posts: 421
Likes: 0
From: Cheyenne, WY
Car: 1991 T-Top RS
Engine: 305 TBI
Transmission: 700R4
Why don't you guys try spraying a ton of armour all on it letting it sit in for an hour then treating it every couple weeks. it's supposed to keep it supple so it won't crack and break.
Joined: Nov 2002
Posts: 3,466
Likes: 5
From: MA, USA
Car: 83 bird
Engine: 305/383
Transmission: WC T5
Axle/Gears: 3:42
Ok, I'm not making this up, you all cursed me! I got in my car today after reading this post, and hit my knee on the corner of my once-mint dashpad. The whole corner cracked because of the cold, aghhhhh!!!!!
Supreme Member
Joined: Jan 2003
Posts: 1,059
Likes: 0
From: Woodbury, NJ
Car: 87' Iroc
Engine: 350
Transmission: 700R4
what causes the dashes to crack? i have an 87 iroc with a PERFECT dash "knocks wood" i mean godamn perfect, not a single imprefection, looks brand new, when i bought the car from the guy he offereed me 100$ if i could find another camaro with a dash in my condition, and he's damn right, my dash is A+ perfection, now how do i keep it that way? i read that armorall has alcohol which actually dries it out, i went to pepboys to pick up some 3M mosterizer and couldn't find any, i live in south jersey, it does get cold.....what the hell would cause the dash to crack like that? what can i do? does losening the bolts work? if so where are the bolts and how many? the interior of my car is the only thing that is mint and i want to keep it that way
Thread
Thread Starter
Forum
Replies
Last Post
Vintageracer
Interior Parts for Sale
12
Sep 24, 2017 12:34 PM







