89GTA, DOn't think they are factory 89GTA seats since they are not lumbar.I will see if I can get a pic.. They are a 4way seat, except the listed 4way at the dealer doesn't have same handles . Both handles are hooked.. Anyway the pins that the 3rd and 4th way (seat a$$ part rock up/down 
) 1 is busted.. see my drawing ( i used the black craylon : ) ) anyway this pin goes through 3 parts of the seat and is flared at the end to prevent it from coming out. Is this replacable? Do you know what I am talking about I will get a pic... I went looking for 4th gen seats.. Found 3 sets of leather power lumbar and all were left to the elements due to busted ttops and care free junk dealers.. and for 1 reason or another none were suitable..
) 1 is busted.. see my drawing ( i used the black craylon : ) ) anyway this pin goes through 3 parts of the seat and is flared at the end to prevent it from coming out. Is this replacable? Do you know what I am talking about I will get a pic... I went looking for 4th gen seats.. Found 3 sets of leather power lumbar and all were left to the elements due to busted ttops and care free junk dealers.. and for 1 reason or another none were suitable..
Supreme Member
Do you think this could be a seat and seat track from a Formula?
The seat track on there--if I'm not mistaken--has the 2 handles under the seat--one on each side.
The seat track on there--if I'm not mistaken--has the 2 handles under the seat--one on each side.
well could be.. hope the car isn't a formula though
car has no rpo sheet and 2 gta decals aren't there..
anyway.. I will post a picture..
None has tracks that they would part with?
car has no rpo sheet and 2 gta decals aren't there..
anyway.. I will post a picture..
None has tracks that they would part with?
Senior Member
replace them with 4th gen seats.
Supreme Member
My GTA has the double handles underneath. - Should be replaceable, just look for something similar in another 3rd gen at the junk yard.
- or just do the 4th gen seats - I would if mine weren't identical except for the headrest...
- or just do the 4th gen seats - I would if mine weren't identical except for the headrest...
Supreme Member
It's really hard to tell where your damage is--but can you thread a nut and bolt in it or did the hole tear?
That's the same seat track that was in my Formula--and they're also in various Birds and T/A's--not very hard to find one. I actually have 3 of them but they're in storage
.
That's the same seat track that was in my Formula--and they're also in various Birds and T/A's--not very hard to find one. I actually have 3 of them but they're in storage
. the broken part (the pin) has 2 different size shanks so you can't just thread a bolt in. the pin is wore. Would have to take a bolt, put it on a lathe and machine part of it down.. then harden it I would say so it wouldn't bend.. I am searching for 4th gen seats but the salvage yards around here don't regard seats as a resellable item and thus don't cover them over and they are all ruined.. So I though, hey maybe someone has fixed this problem before... seat is in vg shape except the pin
seat is in vg shape except the pin Senior Member
did the seat come like that with the head rest like that!? i want some those seats look sweet.
They were like that when I got them.. I was thinking of getting them recovered. (until they broke) I was going to get a better font. I was told it isn't a "manly" font