im about to out in a 4th gen dash and center console,ive done the searches and i cant find a wiring diagram on how to wire up the new console to the old stuff,i heard it was possible to do,and somone made a wireing diagram,but i cant find it,any help would be great,thanx

 

everytime i see that car i drool.. thats a hot ride

 

If you painted that yourself, I need to drive out to AZ and have you hook me up! My dad lives up in heber. I use to live in gilbert. Let me know how much it would cost for the paint

 

If you find some info, let me know.
My 4th gen dash will be here in a couple of weeks.
I can't wait to get it. Been waiting 2 years to get one.

 

i did paint it myself.,depends on how you want it painted,prolly around 600 or so, probably less.depending on what kinda paint and how much work you want done,etc.. i got the dash in,fun stuff. i wires up the gauges,the tach jumps around alil bit,i got alot more to do stil.i jstu bought the book for the new camaro and cross refernced the wires and crap,it isnt that hard,but not that easy,lol,takes alot of putting ina nd taking out and cutting and lotsa small crap.

 

Hey camarostd you've got mail

 

this is roughly in,i just put it in so i could see how it all ligned up,now i get to take it out and paint it all and everything....

 

the place where it had an airbag is all messed up,but im making a plate to go over it and im gonna glass it and paint it yellow i think.

 

actually, the 4th gen 93-96 guage wiring has been posted and i got it saved here somewhere, also i have the 97-02 wiring here from when i did mine up.

 

can you psot that wiring thing for the 95 ? that would be awesome,i got it all wired up now,but the tach kinda jumps around and the fuel gauge doesnt work.thanx

 

my tach junps around too after I did my 4th gen dash swap. it will only work smooth if I use the MSD box. Im not using it now since it cuts out after a few minutes but anyway. fuel gauge wire shoul dbe the same color on both sides of the harness. i think it was purple IIRC.

 

the tach is also to high, but the fuel is hooked up,i ahve both car manuals and jsut checked the wires in each and it should work,but doesnt,lol,i dunno,wuts the thing were sposed 2 ahve for the speedo to work?the car i got this from was a 3.4 95 camaro w/ a 5 spd like mine.

 

I liek the interior, cammystud is your car just a 2.8L? Also wat kinda paint did you use one the interior, i like it. I got a maui blue formula and that might be a good add one for it.

 

heres what it did look like,i used fibetglass,bondo and some spray paint,lol,and then some clear in a can.nothing expensive.the gray piece wa in the process of being done black,and heres alink to how i did some of the fiberglass stuff.https://www.thirdgen.org/techbb2/sho...light=interior

 

IMO, the old dash looked a lot better. Still a hell of a nice car. Then again im not a big fan of the fourth gens.

 

when this one is done it'll look good,i have to paint it and do alot of stuff to it still.that picture is just fo it thrown in their.

 

Ok, im not sure weither to be disapointed or not, cause no one rembers me! No, im just playing. I installed a 1995 v-6 auto tranny dash into my 1992 camaro. If you have a cable speedo, you need the VSS conversion box by dakota digital. If you have the electronic version, you will NOT need the box. I posted acouple times on what all the wires go to. Here is the link

:https://www.thirdgen.org/techbb2/sho...highlight=dash

This should be all your looking for. Anything else you need, just ask. Thank me later