i am getting ready to add some switches to my car for nitrous, fuel, cut out, ect. i have some ideas of what i think i want to do but id like to see everyone elses setup. so if you have switches in your car i wanna see em.

 

somebody has to have pictures of their switches.

 

Here are some pics of the swtiches in my car. Still have some work to do on my custom center console to get everything to fit together. Also I am thinking about redoing the switch console again as well.

Here is the console out of the car.







And here it is installed in the car






All of the switches don't work right now but eventually they will. They are mostly for scanner, 2 sets of fog lights, neon lights, voice box, front mounted camera and rear mounted camera. That is all that is hooked up right now but I am thinking of slimming it down a bit and moving some switches into an overhead console.

 

Do all those switches and lights do something?

 

not a very good picture...but here are some of mine...

 

ive been wanting to put some in an overhead console also. ive have seen some pictures in the past and i am killing myself trying to find them now.

 

84customZ28, is that a blue digital display behind the shifter/pw switches? If so, what do you use it for and where did you get it?

 

good eye, yeah, that's a digital gauge. It's hooked up to my amp for my stereo and tells me how man volts the amp is putting out....very useful gauge.

 

Does the display light up in Blue? Where did you get it?

 

yeah, it lights up in blue....I got it through some audiobahn website....

 

here is a switch panel i made up, they really serve no purpose yet. They are not connected to any of my props I am making.


Sorry if the image may be to big.

Yes it is Back to the Future replica of the Time Circuit Drive Switch and control panel.

I plan on making me a custom part to fit between the air vents, and the center console for switches, that or a custom overhead console.

Edited for link error.

 

all im seeing is a red X

 

right click the X and then click show pic. If that don't work the like is http://www26.brinkster.com/howlingmadinc/passidebox.jpg

hope that helps. Dern brinkster.

 

wow, thats one obtrusive looking gizmo!

Props?

 

"wow, thats one obtrusive looking gizmo!"
That is the usual reaction.

Props as in the Flux Capacitor, Time Circuit display. Its a slow job, but at the time of making these things i got to make them temoprary. That way i don't hurt the car itself.

 

I will try to get some pics of my interior, but so far I have a butt load of switches.
1. Fuel pump cut off switch.
2. Fan switch.
3. Air/fuel ratio guage switch.
4. Red light up pedals switch (had to do those )
5. Two remotes for two massage chairs in the car.
6. Two free switches for whatever.
7. TC lockup switch in progress (really see no purpose to it).

My plan with the switches.

I already have a paper thin press pad for 4 switches and its barely seeable next to my steering wheel.
However, I plan on installing a little motorized gate for my grille. Basically I have a custom cut off grille (ala nascar, same positioning) and I am thinking of putting a closed/open type of restrictor. When you press the switch the plastic moves out of the way for highway crusing.
Also, a NOS bottle is going into my spare tire compartment, so few switches for that too.

A lap top is going in, I am fabing up a little hideaway shelf for it.

I am very motivated and inspired by knight rider and its console. However, I do own a pro/am and want to make it really ONE of a KIND.
I wll get some pics on my website in few days. Till than check my Pro/am out at
http://www.krusaders.20m.com

Thanks

 

Here's some from Jimmy' Jam's Nitrous Accessories

 

Here it is- one from Jimmy Jam's

 

The radio plate

 

And one more

 

And one more