hello could someone please tell me how i get to my headlight turnsingnal switch.,.,on my 91 rs camaro i dont see no screws and ,.,.i realy need to get my high beems to work.,.,.,.,.,.,please help

 

your going to have to remove the steering wheel and go through the column there you will see how it is all put together. your 91 more likely has a SRS system in it (airbag) you need to go through a manual chitons will be fine to show how to remove the air bag safely. this is a big thing it could kill you if not careful. i had a freiend who did this so it one of my biggest concerns for anyone doing this job

 

If the tilt mechanism is loose it can cause the turn signal/high beam switch to not align properly. Either way you'll have to go into the steering column and there's a tech article here on tightening the column that can walk you through.

 

I just change my lever and ill tell you what. Without looking at anything and thinking i was just gonna change it. There is a metal rod that runs down the steering column and fits to a plastic piece in the (close) to the steering wheel. If i didnt see how that fell apart i dont think i would of gotten it back together. There is def. a little bit to watch out for and def. be careful.