How do you think these would look?
How do you think these would look?
Hey guys! Its been awhile...
I have an opportunity to purchase some seats for my car for $800+ shipping newly covered. How do you think these would go with my car?
My Z28 has light tan interior with a gloss black bolt in roll bar...Here is the newest pic of the Z28...?

I have an opportunity to purchase some seats for my car for $800+ shipping newly covered. How do you think these would go with my car?
My Z28 has light tan interior with a gloss black bolt in roll bar...Here is the newest pic of the Z28...?

Last edited by shawn18jgr; Dec 8, 2005 at 06:39 PM.
Member
iTrader: (1)
Joined: Oct 2004
Posts: 210
Likes: 0
From: Illinois
Car: 1989 GTA
Engine: 350 TPI L98
Transmission: 700R4
I think those will look very nice. Im a big fan of the two tone tan interiors. My late recaro TA had the two tone like that except with gray in the centers. It looked very tasteful and gave it uniqueness. Be sure to recover the upper section of the doorpanel to match too and it'll look as hot on the inside as it does on the outside!
Beautiful car man
Supreme Member
iTrader: (5)
Joined: Aug 2004
Posts: 1,912
Likes: 0
From: Redondo Beach CA
Car: '02 Z06
Yep those are some nice seats and they'll flow with your car perfectly. The black heritage stripe theme will now be incorporated into your interior in a way. Get em.
Supreme Member
Joined: Nov 2004
Posts: 1,196
Likes: 6
From: Illinois
Car: '91 Z28 & '90 RS Vert & '89 RS
Engine: 5.7L & none & 2.8L (soon to be LSX)
Transmission: yes
Axle/Gears: One's with teeeeefs
shawn18jgr
what's your car domain name... I wanna check out that car some more.....
those seats would look good if they match the interior color you have in there now.....shippings gonna be a lot tho....
those seats would look good if they match the interior color you have in there now.....shippings gonna be a lot tho....
what's your car domain name... I wanna check out that car some more.....
Therefore, I'm going to try and make a full webpage dedicated to my car, and Camaro's with links, other Camaro's, history and everything. If you need anything or whatever you can email me anytime or IM me on AOL Shawn18JGR.
Thanks for your opinions I just want to make sure they will look great...Versus me painting every flippin trim peace and changing everything over to black this will make a nice look and blend well I'm hoping.
Last edited by shawn18jgr; Dec 2, 2005 at 01:05 AM.
Trending Topics
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 4,226
Likes: 6
From: Chesterfield, Indiana
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
geez bro, you never told me about those...I would definently consider those for your interior....I think it's a perfect match
Member
Joined: Jul 2005
Posts: 237
Likes: 0
From: Long Island, NY
Car: 1987 camaro
Engine: 6 cylinder
Transmission: 5-speed
hey what kind of red is that i was thinking of painting my car red but i dont know if theres a certain kind of red i should use. and what are those rims, that car looks amazing.
Thanks guyz...
Thats Dupont bright red...somewhere in the file I have the paint code# yet its just bright red. I purchased the car less the stripes, wheels, and newly restored front bumper, lights,facia, and grill for 4k in 2004 so it came with that paint job. Its a really great paint job...Not perfect but couldn't be better for what I paid for the car.
The wheels were custom made in S.California ZE Forged Stixx there discontinued I guess.
The cars getting there slowly. I would so love to dump 10K in it yet, I do not have a lot of money to spend on it. Yet, when I do and can buy something for it I apprciate it. I guess someday it will be where I want it. As you all know it never ends!
Thats Dupont bright red...somewhere in the file I have the paint code# yet its just bright red. I purchased the car less the stripes, wheels, and newly restored front bumper, lights,facia, and grill for 4k in 2004 so it came with that paint job. Its a really great paint job...Not perfect but couldn't be better for what I paid for the car.
The wheels were custom made in S.California ZE Forged Stixx there discontinued I guess.
The cars getting there slowly. I would so love to dump 10K in it yet, I do not have a lot of money to spend on it. Yet, when I do and can buy something for it I apprciate it. I guess someday it will be where I want it. As you all know it never ends!
Supreme Member
iTrader: (1)
Joined: Aug 2004
Posts: 2,122
Likes: 1
From: colorado
Car: 1992 Trans/am convertible
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 2.73 drum WS6
I might be the only one to say this, so here we go.
You can get two cool racing seats for about 150 a piece, and than get a rear set from a JY from a fourth gen. It will come up way less in cost and it would look very cool!
I am thinking that 800 is waaaay too much for the seats. But than again I am always on a budget and my thought has been clouded by that
Good luck, and a sweet looking camaro!
You can get two cool racing seats for about 150 a piece, and than get a rear set from a JY from a fourth gen. It will come up way less in cost and it would look very cool!
I am thinking that 800 is waaaay too much for the seats. But than again I am always on a budget and my thought has been clouded by that
Good luck, and a sweet looking camaro!
Not a bad idea...I have thought that too...Yet, its so hard to find racing seats that fit right. I hear Sparco sit to tall in our cars...
I do not have the resources or ability to custom fabricate anything. I know you can get anything done these days. I dont want to use a bracket that I have to drill into the floor pan. But I might for this below...
I was thinking of adding that seat set and then buying this seat for the drivers seat for when I take it Road Coursing and Autocross events. Its 1399.00 yet I only need one and it would complinment my future suspension planned upgrades and be perfect. There is one on Ebay right now for $800.00 new.
I'm going to see how that goes...I'm trying to kinda build a pro touring Z28 that a race/street car over time...

Similar to this car!
I do not have the resources or ability to custom fabricate anything. I know you can get anything done these days. I dont want to use a bracket that I have to drill into the floor pan. But I might for this below...
I was thinking of adding that seat set and then buying this seat for the drivers seat for when I take it Road Coursing and Autocross events. Its 1399.00 yet I only need one and it would complinment my future suspension planned upgrades and be perfect. There is one on Ebay right now for $800.00 new.
I'm going to see how that goes...I'm trying to kinda build a pro touring Z28 that a race/street car over time...

Similar to this car!
Last edited by shawn18jgr; Dec 3, 2005 at 01:52 AM.
Supreme Member
iTrader: (25)
Joined: Jul 2004
Posts: 2,623
Likes: 0
From: Beautiful BC
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
sweet looking seats, I'd say go for it.
Joined: Feb 2001
Posts: 8,494
Likes: 411
From: Sophia, NC
Car: 2016 Camaro SS + 1986 Z28
Those are pretty sharp. My buddy (Luvmy92) has the same covers only in black and white to match his white 92 with black heritage stripes.
I say do it!!!
I say do it!!!







