Body General body information and techniques for restoration, repairs, and modifications.

Interior From 1993 Camaro Going Into 86 T/A

Thread Tools
 
Search this Thread
 
Old Apr 24, 2006 | 03:37 PM
  #1  
roughskinjrz's Avatar
Thread Starter
Supreme Member
 
Joined: Jul 2005
Posts: 1,423
Likes: 1
From: Miramichi, NB
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
Interior From 1993 Camaro Going Into 86 T/A

hey i have a bunch of questions, i have searched and searched, but came up empty on a couple of things. The car has 110,000km and interior is very clean.

1) Cloth Seats - Will Fit

2) Seat Belts - Will Fit

3) 6 Speed Console - Will Fit

Now im looking at 2 other things, Carpet, and The Dash.

1) Will Carpet Fit? the owner claims that they have the same body type even with the hump on the passenger side, any truth to this?

2) I have read all the information on the Dash, im getting the whole works. what will i need from the donor? just the connectors from the back with about 4-5 inches of wiring?

also, would anyone have a rough estimate on how much i should offer its a 93 camaro clean interior, i dont have pics but its good, not excellent.

if you can answer my questions i would be greatly appreciative.
Reply
Old Apr 25, 2006 | 09:38 AM
  #2  
roughskinjrz's Avatar
Thread Starter
Supreme Member
 
Joined: Jul 2005
Posts: 1,423
Likes: 1
From: Miramichi, NB
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
ttt

im also running a carbureted motor, so there is no computer

SOMEBODY must have done this swap. i just need wiring help.

Last edited by roughskinjrz; Apr 25, 2006 at 03:21 PM.
Reply
Old Apr 25, 2006 | 02:36 PM
  #3  
roughskinjrz's Avatar
Thread Starter
Supreme Member
 
Joined: Jul 2005
Posts: 1,423
Likes: 1
From: Miramichi, NB
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
i actually heard that the camaro and firebird wiring is different.

does anyone have the wiring handy from a 1993 camaro, and a 1986 pontiac trans am?

also if you could help me out which i should take from the donor, once the dash is out i would like to take everything i can ge my hands on, not sure what i need and dont need.

thanks.
Reply
Old Apr 25, 2006 | 09:23 PM
  #4  
roughskinjrz's Avatar
Thread Starter
Supreme Member
 
Joined: Jul 2005
Posts: 1,423
Likes: 1
From: Miramichi, NB
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
noone?
Reply
Old Apr 26, 2006 | 01:18 PM
  #5  
roughskinjrz's Avatar
Thread Starter
Supreme Member
 
Joined: Jul 2005
Posts: 1,423
Likes: 1
From: Miramichi, NB
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
i found the wiring from a 93 camaro on this site, but i need to know wiring for an 86 trans am so i can match the wires. i have a 82-83 trans am haynes manual is the wiring from an 86 same as 82-83? is the same as an 88? anyone know this? but this doesnt help me i dont think because the thirdgen is an 85 tpi camaro, my vehicle use to be fuel injected so the wires are still there for it. would an 85 tpi camaro have the same wires as an 86 trans am?


Last edited by roughskinjrz; Apr 26, 2006 at 01:22 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frozer!!!
Camaros for Sale
35
Jan 19, 2024 04:55 PM
Vintageracer
Camaros for Sale
12
Jan 10, 2020 05:33 PM
IMissMy86TA
Auto Detailing and Appearance
27
Aug 31, 2015 08:40 PM
Akinnepa
Convertibles
6
Aug 26, 2015 10:54 AM
lakeffect2
Cooling
11
Aug 23, 2015 08:44 AM




All times are GMT -5. The time now is 05:12 AM.