Total Tear down in 3.5 hours
Total Tear down in 3.5 hours
Senior Member
Joined: May 2002
Posts: 772
Likes: 0
From: Montgomery, AL...for now
Car: 1987 F150...PAAARTY FOUL!
Engine: 300 I6 stump pullin sumbiscuit
Transmission: 4 speed grind box
Axle/Gears: 3.55 unlimited slip differential
yea, i've seen that before...didn't like it this time any more than last time...that car was way too clean to chop up like that...
Josh
Josh
Senior Member
iTrader: (1)
Joined: Jun 2003
Posts: 955
Likes: 0
From: MA
Car: 1981 Chevy Malibu, 1987 Formula 350
Engine: 229 V6, L98 TPI 350
Transmission: TH350, 700R4
Axle/Gears: 10 bolt ???, 9 bolt 3.27 posi
Been there, done that.... Took a little more than 3.5 hours, maybe like 5, but that was with just 2 of us for about half the time, then a 3rd person for the other half.






Joined: Apr 2004
Posts: 556
Likes: 1
From: Houston, TX
Car: 1986 Z28
Engine: LT1
Transmission: T5 WC
Axle/Gears: 3.42 T2R
It had frame damage that had already been poorly repaired once. Hear the *crunch* "ew owie" as it pulls up the driveway? No, that's not from the front airdam. Clean? Not so much. More of not so high quaility footage/video. It had the typical teal clear coat peal on roof/rear deck IIRC. 305 TBI... not a whole lotta desire there.
The hatch still lives on on my car, the wheels are on my gf's car.
I got the same type responses when I did the same thing to a WRECKED 92 b4c. "shoulda fixed it". It was worth more to me to swap everything over to my already caged '86, than to fix it, sell it, then start looking for all the bits that I wanted from it, and hope to break even.
The hatch still lives on on my car, the wheels are on my gf's car.
I got the same type responses when I did the same thing to a WRECKED 92 b4c. "shoulda fixed it". It was worth more to me to swap everything over to my already caged '86, than to fix it, sell it, then start looking for all the bits that I wanted from it, and hope to break even.
Trending Topics
Senior Member
Joined: May 2002
Posts: 772
Likes: 0
From: Montgomery, AL...for now
Car: 1987 F150...PAAARTY FOUL!
Engine: 300 I6 stump pullin sumbiscuit
Transmission: 4 speed grind box
Axle/Gears: 3.55 unlimited slip differential
well, that i didn't know...and i understand tearing it down now. if it had bad frame damage you can't really do much with it but to part it out. ya'll moved fast!
Josh
Josh
Supreme Member
Joined: Jan 2001
Posts: 2,412
Likes: 0
From: St Catharines, ON
Car: '85 Z28
Engine: 350
Transmission: T5
Axle/Gears: 3.23
I hope you can explain this cause its freakin me right out. i bet they got a lot of money for all those parts. much more than selling the car whole. a lot of the 91-92 parts are hard to find and people are happy to pay more for them.
Senior Member
iTrader: (1)
Joined: Jun 2003
Posts: 955
Likes: 0
From: MA
Car: 1981 Chevy Malibu, 1987 Formula 350
Engine: 229 V6, L98 TPI 350
Transmission: TH350, 700R4
Axle/Gears: 10 bolt ???, 9 bolt 3.27 posi
a) he's not a ghost
b) i've looked at all those pics several times before, and those are just the ones i had uploaded to my photobucket, so i've posted them on forums before and never noticed
c) i dont see HOW it could just be something with the camera, cause if it was just that the shutter was open for a long time and he walked in front of it, wouldnt it be blurry?
d) I havnt talked to that kid in 3 months since he left for boot camp at Parris Island, yet right when i realized he was transparent in that picture and was thinking "wtf?", guess who calls me to tell me he's on his way home from boot camp? yep.
freakin FREAKY. lol
Joined: Apr 2004
Posts: 556
Likes: 1
From: Houston, TX
Car: 1986 Z28
Engine: LT1
Transmission: T5 WC
Axle/Gears: 3.42 T2R
*edit* n/m they block photobucket/fototime type sites at my work... */edit*
Last edited by GMan 3MT; Jan 12, 2007 at 03:07 PM.
Supreme Member
iTrader: (1)
Joined: Feb 2000
Posts: 7,964
Likes: 4
From: Norfolk, VA. USA
Car: 86 Trans Am, 88 Formula
Engine: 95LT4, 305TPI
Transmission: T56, T5
The ghosting image is caused by him using the flash and a half second exposure.
the flash captured him and then he moved and the camera picked up the background.
Camera was a Kodak DX4530
the flash captured him and then he moved and the camera picked up the background.
Camera was a Kodak DX4530
Member
Joined: Jul 2005
Posts: 190
Likes: 0
From: St. Louis
Car: 1987 Camaro Sport Coupe LT
Engine: 5.0 305 Code H
Transmission: 700R4
Member
Joined: Dec 2006
Posts: 149
Likes: 0
From: Cheyenne Wy
Car: 1984 Camaro
Engine: 350 bored .30 over
Transmission: TCI 700-R4
Axle/Gears: Stock 3.23 i think
MURDERS
I would kill for a 91 camaro thats cheap and has a decet body. Video should be banned from ever being played.
I would kill for a 91 camaro thats cheap and has a decet body. Video should be banned from ever being played.
Senior Member
iTrader: (1)
Joined: Jun 2003
Posts: 955
Likes: 0
From: MA
Car: 1981 Chevy Malibu, 1987 Formula 350
Engine: 229 V6, L98 TPI 350
Transmission: TH350, 700R4
Axle/Gears: 10 bolt ???, 9 bolt 3.27 posi
Senior Member
iTrader: (1)
Joined: Nov 2006
Posts: 830
Likes: 0
From: Victoria BC Canada
Car: 87 Camaro IROC
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 3.23
im jelious, it took me 7 or 8 hours to dismantle an 85' V6 camaro, but i took out tranny and engine in 1 shot...more fun that way.
Well this one was cheap but the body was not decent and the underside was in really bad shape. That scraping sound you hear as the car turns in to the driveway is not the nose hitting the ground. Its the subframe falling out of place
Supreme Member
iTrader: (45)
Joined: Dec 2003
Posts: 3,970
Likes: 1
From: Northern, VA
Car: Pair of 92 Z28s
that id like to see...im just finding it hard to picture, bet that was scary as hell to drive. I took another look at that video the whole front fender was a different color and doesnt look lined up very well but other then that i cant tell from the quality.
Supreme Member
Joined: Jan 2001
Posts: 1,374
Likes: 2
From: Pittsburgh, PA
Car: 06 SRM M6 GTO, 98 Grand Prix GTP
heh, thats what mine looks like right now, only its getting put back together as soon as I'm done por-15-ing everything and putting new inuslation on the interior.
good stuff, i just figured zepher knew him lol.
that id like to see...im just finding it hard to picture, bet that was scary as hell to drive. I took another look at that video the whole front fender was a different color and doesnt look lined up very well but other then that i cant tell from the quality.
that id like to see...im just finding it hard to picture, bet that was scary as hell to drive. I took another look at that video the whole front fender was a different color and doesnt look lined up very well but other then that i cant tell from the quality.
Supreme Member
iTrader: (1)
Joined: Oct 2004
Posts: 3,361
Likes: 1
From: Worcester, MA
Car: 86 T/A
Engine: HSR 355
Transmission: 700R4
Axle/Gears: 2.77 posi
Thread
Thread Starter
Forum
Replies
Last Post
Bohemian
Aftermarket Product Review
11
Nov 25, 2015 09:38 PM






