Is there really a camaro under this?
Thread Starter
Member
Joined: Oct 2006
Posts: 259
Likes: 0
From: Long Island, NY
Car: 1987 IROC-Z
Engine: 350 TPI
Transmission: 700r4
Axle/Gears: 3.23
Is there really a camaro under this?
http://cgi.ebay.com/ebaymotors/91-CA...QQcmdZViewItem
Check that out, you think there is a camaro under that? I can't decide if I like it or not...prolly b/c I still can't seem to figure it out
Check that out, you think there is a camaro under that? I can't decide if I like it or not...prolly b/c I still can't seem to figure it out
Supreme Member
Joined: Nov 2004
Posts: 1,196
Likes: 6
From: Illinois
Car: '91 Z28 & '90 RS Vert & '89 RS
Engine: 5.7L & none & 2.8L (soon to be LSX)
Transmission: yes
Axle/Gears: One's with teeeeefs
at least that guy on ebay posted a pic at the end of the auction to show the car he destroyed....
Supreme Member
Joined: Nov 2004
Posts: 1,196
Likes: 6
From: Illinois
Car: '91 Z28 & '90 RS Vert & '89 RS
Engine: 5.7L & none & 2.8L (soon to be LSX)
Transmission: yes
Axle/Gears: One's with teeeeefs
Trending Topics
Senior Member
iTrader: (5)
Joined: Nov 2006
Posts: 1,517
Likes: 0
From: Tallahassee, FL
Car: 89 V6 Camaro
Engine: 2.8
Transmission: 700R4
Axle/Gears: 3.42 open diff
Thats one of the best Camaro body changes I've seen and I actually like. I wouldn't do it but it looks good.
Ok..looks good. But, no engine no transmission and needs to be finished. Dont forget $14,000. I think for that you could buy a ferrari w/o a engine and trans, or how about a 69 GTO with out an engine and transmission. Two very important details. I think I saw a kit for sale that was similar. So, 6500 for a 91 camaro body. And 8500.00 for a fibergalss kit. I notice noone bid on it yet.
Is it me or does it look like a mustang.
Is it me or does it look like a mustang. Last edited by rideon1200; Jan 15, 2007 at 09:57 AM.
Member
Joined: Jun 2006
Posts: 338
Likes: 5
From: Windsor Ontario, Canada
Car: 1986 Firebird
Engine: V6
Transmission: Automatic
Isn't that kit named the EVO kit? I think I saw it posted on here somewhere.
EDIT: Here's Evoluzione1's cardomain site, he has the same thing done to his car. More pics are on the site. http://www.cardomain.com/ride/826450
EDIT: Here's Evoluzione1's cardomain site, he has the same thing done to his car. More pics are on the site. http://www.cardomain.com/ride/826450
Last edited by Poject '86; Jan 15, 2007 at 11:18 AM.
Member
iTrader: (4)
Joined: Nov 1999
Posts: 273
Likes: 1
From: Fox Lake, IL
Car: 1988 camaro sports coupe
Engine: Fast Burn 385
Transmission: 700r4
Axle/Gears: 9 bolt w/ 3.27 gears
really ?!?
Am I the only one that strongly dislikes the way that car looks? I guess the rear looks alright, but as soon as you figure out what it isn't, like an exotic sports car, it becomes cheezy. Even more cheezy if someone asks what it is and you say a camaro. A camaro with a body kit that cost more than the actual car! I'd imagine the import tuners would love you though. That guy on ebay is INSANE. $14,000 for a shell and a body kit? Oh yeah, I forgot the $2000 rims w/useless tires. I don't know what that guys smoking, but he should stop...or pass it to me so I can figure out what he sees! But hey, whatever turns you on. Your car, your money right.
Supreme Member
iTrader: (7)
Joined: Nov 2006
Posts: 3,740
Likes: 15
From: Alamogordo, NM
Car: 88 Formula 350
Engine: 5.7
Transmission: T-56
Axle/Gears: 9" 3.89
Yeah, I think the front looks kinda like a new mitsubishi Eclipse. I don't like it. Looks too much like an import.
Joined: Apr 2002
Posts: 2,029
Likes: 2
From: Ohio
Car: 88' Iroc-Z
Engine: LQ9
Transmission: T-56
Axle/Gears: 3.42
i think the evo kit ran right around $10k and then he's adding $4k for the car which is going rate for a 91z but with no engine or tranny it's a loss hes trying to get what he put in to it. I like the evo kit but i wouldnt tear up a great looking car for one. maybe if i had one that isnt quite a parts car and not driveable i'd try it. they'd have to throw in the kit to cause $10k way to much for some fiberglass.
Supreme Member
iTrader: (33)
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
If you ever seen one in person you would know why the price is what it is.
VERY NICE QUALITY GLASS WORK !! Its as simple as that. Ya its alot but the same goes for anything else out there. You pay for quality. Suspention parts,etc..
http://www.cecoatings.com/images/mis...mmit13/EVO.jpg
http://www.cecoatings.com/images/mis...mit13/EVO2.jpg
VERY NICE QUALITY GLASS WORK !! Its as simple as that. Ya its alot but the same goes for anything else out there. You pay for quality. Suspention parts,etc..
http://www.cecoatings.com/images/mis...mmit13/EVO.jpg
http://www.cecoatings.com/images/mis...mit13/EVO2.jpg
Last edited by FSTFBDY; Jan 15, 2007 at 05:03 PM.
Supreme Member
iTrader: (1)
Joined: Mar 2005
Posts: 1,089
Likes: 0
From: Western PA
Car: 91 Camaro
Engine: 3.1/3100 in progress...Turbo Soon
Transmission: 700r4
Wow...Mabye if it were an actual car in itself it would look ok. But why would you destroy a great car
. If this guy wanted an import he should have bought one. Just my opinion.
Also, whats up with the exhaust pipes in the back and on the side??
. If this guy wanted an import he should have bought one. Just my opinion.Also, whats up with the exhaust pipes in the back and on the side??
Last edited by grimmcs; Jan 15, 2007 at 05:48 PM.
Joined: Dec 2005
Posts: 6,499
Likes: 31
From: Macon, GA
Car: 1992 Camaro RS
Engine: Vortec headed 355, xe262
Transmission: T56
Axle/Gears: 9-bolt 3.70
It's not horrible... but I certainly wouldnt trade the stock camaro look for that. These cars are so beautiful, I wouldnt change a thing...
Thread Starter
Member
Joined: Oct 2006
Posts: 259
Likes: 0
From: Long Island, NY
Car: 1987 IROC-Z
Engine: 350 TPI
Transmission: 700r4
Axle/Gears: 3.23
I thought it looked pretty damn sexy in that last pic with the rims on it, even if he just left it with the rims and lambo doors I think it would have been 10000x's better than where it is now. I think that would have looked alot more custom and better than what he did with it. Plus with th emoney he would have saved on the "$8500 body kit" it would of had alot more punch to back up the new look.
Member
iTrader: (1)
Joined: Dec 2006
Posts: 143
Likes: 0
From: New Jersey
Car: 88 Camaro Evoluzione Rebody
Engine: 350
Transmission: wc t5 swap completed!
Axle/Gears: 3.73 10 bolt
Haha, this guy is asking way too much. I just bought this kit in december for only 6,000. I got the entire kit, a working donor camaro with a 350 crate engine, and the right sized wheels (not sure how wide the rears are, but the tires are 335's and fit just right). Yes, I bought it from somebody who already started, but still, 14,000?!
I'm close to having the body completely attached, and then I just need paint and an interior and I'm set. The interior from the camaro is in there, but it doesn't really match the outside.
I'm close to having the body completely attached, and then I just need paint and an interior and I'm set. The interior from the camaro is in there, but it doesn't really match the outside.
Junior Member
iTrader: (1)
Joined: Oct 2006
Posts: 70
Likes: 0
From: Cochranton PA
Car: 1986 Camaro Z-28
Engine: 305 TPI
Transmission: T5
Haha, this guy is asking way too much. I just bought this kit in december for only 6,000. I got the entire kit, a working donor camaro with a 350 crate engine, and the right sized wheels (not sure how wide the rears are, but the tires are 335's and fit just right). Yes, I bought it from somebody who already started, but still, 14,000?!
I'm close to having the body completely attached, and then I just need paint and an interior and I'm set. The interior from the camaro is in there, but it doesn't really match the outside.
I'm close to having the body completely attached, and then I just need paint and an interior and I'm set. The interior from the camaro is in there, but it doesn't really match the outside.
Thread Starter
Member
Joined: Oct 2006
Posts: 259
Likes: 0
From: Long Island, NY
Car: 1987 IROC-Z
Engine: 350 TPI
Transmission: 700r4
Axle/Gears: 3.23
after looking at the cardomain site of http://www.cardomain.com/ride/826450, and seeing those pics of the car....I really don't understand how you can pay that money to make your car look like that. I mean is whoever doing this too there car doing it b/c they want to have the camaro underneath it all, or just b/c that is the car they have to do it on? B/c for that kind of money, as rideon1200 said, you can get alot of nicer cars for that.
Member
iTrader: (1)
Joined: Dec 2006
Posts: 143
Likes: 0
From: New Jersey
Car: 88 Camaro Evoluzione Rebody
Engine: 350
Transmission: wc t5 swap completed!
Axle/Gears: 3.73 10 bolt
I'm doing it because I love the way it looks, and its one of the few kit cars built on a v8 chassis. Most other kit cars are built on 4 cylinder fieros and other underpowered vehicles.
I can't wait to pull up to work/the beach/anywhere else in it- in my opinion, a much bolder statement than pulling up in a 20 year old camaro. No offense to anybody on these boards, because I do like the third gen bodies, but in my opinion, this kit car is in a different class (mostly since very few people own them).
As far as pictures- I have them on my digital camera right now, but won't be able to upload them until later on tonight. It looks similar to the one on ebay, except with the right wheels, and more of it is done. I just finished attaching the last door skin today, and now I only have to bolt on the front clip and its off to the body shop for paint! I'm getting ahead of myself, though- it'll probably be a month or two before paint.
One last point- show me where I can get a powerful, beautiful italian styled car for $15,000 of which only 50 were made, and I'll sell my kit car tomorrow. The reason people build these is that even if you put $25k into them, its still a lot more car than what you pay for it.
I can't wait to pull up to work/the beach/anywhere else in it- in my opinion, a much bolder statement than pulling up in a 20 year old camaro. No offense to anybody on these boards, because I do like the third gen bodies, but in my opinion, this kit car is in a different class (mostly since very few people own them).
As far as pictures- I have them on my digital camera right now, but won't be able to upload them until later on tonight. It looks similar to the one on ebay, except with the right wheels, and more of it is done. I just finished attaching the last door skin today, and now I only have to bolt on the front clip and its off to the body shop for paint! I'm getting ahead of myself, though- it'll probably be a month or two before paint.
One last point- show me where I can get a powerful, beautiful italian styled car for $15,000 of which only 50 were made, and I'll sell my kit car tomorrow. The reason people build these is that even if you put $25k into them, its still a lot more car than what you pay for it.
Supreme Member
iTrader: (1)
Joined: Mar 2005
Posts: 1,089
Likes: 0
From: Western PA
Car: 91 Camaro
Engine: 3.1/3100 in progress...Turbo Soon
Transmission: 700r4
. Supreme Member
iTrader: (8)
Joined: Sep 2004
Posts: 1,896
Likes: 0
From: Charles County, Maryland
Car: 2000 BMW M5
The reason people build these is that even if you put $25k into them, its still a lot more car than what you pay for it.
Member
iTrader: (4)
Joined: Nov 1999
Posts: 273
Likes: 1
From: Fox Lake, IL
Car: 1988 camaro sports coupe
Engine: Fast Burn 385
Transmission: 700r4
Axle/Gears: 9 bolt w/ 3.27 gears
bold statement??? really??
you ARE pulling up in a 20 year old camaro!
In my opinion, an even bolder statement would be pulling up in an ACTUAL italian sports car.
In my opinion, an even bolder statement would be pulling up in an ACTUAL italian sports car. Member
iTrader: (1)
Joined: Dec 2006
Posts: 143
Likes: 0
From: New Jersey
Car: 88 Camaro Evoluzione Rebody
Engine: 350
Transmission: wc t5 swap completed!
Axle/Gears: 3.73 10 bolt
Lol, I probably chose the wrong board to post that comment on, I'm sure I'll get flamed plenty more times. Hehe, oh well. The important thing to note is that once the car is complete, it becomes a $25,000 car, since that is what a completed Evo sells for.
Oh well, I'm not here to argue. Each person is entitled to their own opinion. Just remember that there are plenty of people who drop over 10 grand on third gens, whether it be for car shows, drag races, or whatever.
Anyhow, here are some pics of my car in progress. The wheels are the proper size, but the chassis needs to be dropped about 4 inches until they actually look like they fit. I'll probably be using air ride gear for this. Also, the Ferrari logos on the rims are going to be gone, I just need to get new emblems made.
The first pics show the car this morning, and the last two show it tonight. The rivets hold the skins on while the body panel adhesive sets up. Then they just get fiberglassed over (they are counter-sunk). The tool boxes are also used as weight until the adhesives set, since I can't rivet through the glass.
Oh well, I'm not here to argue. Each person is entitled to their own opinion. Just remember that there are plenty of people who drop over 10 grand on third gens, whether it be for car shows, drag races, or whatever.
Anyhow, here are some pics of my car in progress. The wheels are the proper size, but the chassis needs to be dropped about 4 inches until they actually look like they fit. I'll probably be using air ride gear for this. Also, the Ferrari logos on the rims are going to be gone, I just need to get new emblems made.
The first pics show the car this morning, and the last two show it tonight. The rivets hold the skins on while the body panel adhesive sets up. Then they just get fiberglassed over (they are counter-sunk). The tool boxes are also used as weight until the adhesives set, since I can't rivet through the glass.
Last edited by Riles; Jan 16, 2007 at 07:55 PM.
Member
iTrader: (1)
Joined: Dec 2006
Posts: 143
Likes: 0
From: New Jersey
Car: 88 Camaro Evoluzione Rebody
Engine: 350
Transmission: wc t5 swap completed!
Axle/Gears: 3.73 10 bolt
Senior Member
iTrader: (5)
Joined: Dec 2006
Posts: 2,212
Likes: 0
From: Augusta, Ga
Car: 1987 Trans Am
Engine: 355ci L98 soon to be turbo'd
Transmission: 700R4
Axle/Gears: 2.73 posi
I'll be honest and say its a guilty pleasure. I myself wouldn't mind owning a car that looked like that....but, like mostly everyone else, I wouldn't trade my Trans Am for it. I'd take that over the new GTO. Drop the LS7 and corresponding performance parts and have a unique car....
Member
iTrader: (1)
Joined: Apr 2006
Posts: 222
Likes: 0
From: California (again.....)
Car: All sold :-(
Engine: None
Transmission: None
Axle/Gears: None
I think it's a waste of a perfectly good camaro. I don't like how it looks,.
There's nothing wrong with a good body kit, but to encase a nice looking american sports car like the camaro into a euro inspired fiberglass body is sad to see.
I know there are those that like it but I'm not one of them, and if he sells it for that price I'd be shocked.... kinda like this --->

There's nothing wrong with a good body kit, but to encase a nice looking american sports car like the camaro into a euro inspired fiberglass body is sad to see.
I know there are those that like it but I'm not one of them, and if he sells it for that price I'd be shocked.... kinda like this --->
Last edited by 88KARRV6; Jan 16, 2007 at 10:59 PM.
Supreme Member

Joined: Sep 2005
Posts: 2,151
Likes: 0
From: Osceola Indiana
Car: 92 RS(sold) 1989 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: ones that turn
It's not that horrible looking, but Like everyone else I cant see ruining a camaro for that, and I would much rather drive my camaro then that I actually love how my car looks and drives, and would take it any day over even an italian sports car.....yeah I know im crazy, but I am a redneek
Member

Joined: Jan 2007
Posts: 164
Likes: 1
From: laredo, texas
Car: 92 camaro
Engine: stroker
Transmission: Megaraptor
Axle/Gears: 3.73
hmm i red neck from indiana?????
i dont know, but a car that looks like that better have some power behind it. and i mean real power not a v6,305, or even a stock tpi. the money that ur gonna put in it for a decent small block (ive already spent close to 6 grand on my engine alone) not to mention tranny and suspension. just save ur money and get a corvette at least its american made and a GM , just my 2 cents
Junior Member
iTrader: (1)
Joined: Jan 2003
Posts: 93
Likes: 0
From: MA
Car: 91 Z-28
Engine: 350 TPI
Transmission: 700R4, T-56 future
I wouldn't do it but it looks pretty slick. There is a whole market for kit cars out there and its interesting to see one made from a V8 Camaro rather than a tiny V6 Fiero.
Joined: Jul 1999
Posts: 12,102
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
I wouldn't let anyones negative comments bother you. The camaro is an ugly car stock. Always has been. The 90/91-92 cars have a nicer interior, but the externals have always made me puke. Thats why I always owned firebirds. That evo kit is the first body kit i've seen that actually transforms the car into something that looks great.
- Joe
Love big change threads like this
As to the 14k price, thats very reasonable as far as well started complete kits go
As for the person bashing fiero kits, go look at one
Really
I have alot of respect for people who can take a $200 car, destroy it, put a few grand on a bare body kit, and have a $40-60k car when they are done and 99% of the people that look at it are none the wiser
I find that amazing and a true car enthusiest
Most of the kit guys I talk to say its more intensive than a frame off restoration
Member
Joined: Oct 2004
Posts: 379
Likes: 0
From: ohio
Car: 88IROC vert and a 83 w/evo body
Engine: 400 and 350
Transmission: T56 and 700R4
Axle/Gears: 323 and 373
after looking at the cardomain site of http://www.cardomain.com/ride/826450, and seeing those pics of the car....I really don't understand how you can pay that money to make your car look like that. I mean is whoever doing this too there car doing it b/c they want to have the camaro underneath it all, or just b/c that is the car they have to do it on? B/c for that kind of money, as rideon1200 said, you can get alot of nicer cars for that.
I love camaro's and worked on the camaro and restored it for several years until I was completly happy. Then I got board and had the car and realy liked the kit and one thing lead to another and cut, cut and after cut one thier is no going back. Once you see one of these cars in person you can see why one would consider building one. The are awsome looking in person.
Once you drive one around and se they get a bigger reaction then a Ferrari you would understand.
I went to Jeg for some parts one day in the car and cleared the store out except for the guard. Clearing a jegs store due to what you driving is a huge thing since they see a lot of great cars. I have been followed for 10 miles just so a guy could ask what kind of car is that and then he sat and stared at it for a while. This is the things that make this car great.
I do look back from time to time and regret what I done but I would do it again if I had the money.
Senior Member
iTrader: (5)
Joined: Dec 2006
Posts: 2,212
Likes: 0
From: Augusta, Ga
Car: 1987 Trans Am
Engine: 355ci L98 soon to be turbo'd
Transmission: 700R4
Axle/Gears: 2.73 posi
I wonder if in Europe they have body kits that make their Ferraris and Porshe's look like Camaros and Firebirds? haha...
Joined: Jul 1999
Posts: 12,102
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Member
iTrader: (4)
Joined: Nov 1999
Posts: 273
Likes: 1
From: Fox Lake, IL
Car: 1988 camaro sports coupe
Engine: Fast Burn 385
Transmission: 700r4
Axle/Gears: 9 bolt w/ 3.27 gears
Joined: Jul 1999
Posts: 12,102
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Member
iTrader: (1)
Joined: Apr 2006
Posts: 101
Likes: 0
From: Caledon, Ontario
Car: 11 F350 CC DRW Dsl
I like the looks of the kit. At the eBay price it's reasonable. At the price Riles paid it's a heckuva deal.
As far as wrecking good cars lets face it 3rd gen's are a dime a dozen in reasonable shape. If you don't like people cutting them up to make a kit car then bash everyone that drives one in a northern winter as they are doing more damage than the former. I picked up a good 91 Z28 core that'll eventually get an LSx transplant and a new interior. No different that changing the exterior.
I only wonder why the red car on eBay has side exit exhaust and tail pipes.
As far as wrecking good cars lets face it 3rd gen's are a dime a dozen in reasonable shape. If you don't like people cutting them up to make a kit car then bash everyone that drives one in a northern winter as they are doing more damage than the former. I picked up a good 91 Z28 core that'll eventually get an LSx transplant and a new interior. No different that changing the exterior.
I only wonder why the red car on eBay has side exit exhaust and tail pipes.
Joined: Oct 2004
Posts: 2,086
Likes: 0
Car: 2012 Corvette
Engine: LS3
Transmission: TR6060
Why do people always do that **** to the Z28s? That car looked like it was in good shape before he did that, and it even had the rare 4 wheel disks w/ the 145mph speedo! Poor car.
Thread Starter
Member
Joined: Oct 2006
Posts: 259
Likes: 0
From: Long Island, NY
Car: 1987 IROC-Z
Engine: 350 TPI
Transmission: 700r4
Axle/Gears: 3.23
Well since this is my car on cardomain, I can tell everyone why one would do such a thing to a third gen.
I love camaro's and worked on the camaro and restored it for several years until I was completly happy. Then I got board and had the car and realy liked the kit and one thing lead to another and cut, cut and after cut one thier is no going back. Once you see one of these cars in person you can see why one would consider building one. The are awsome looking in person.
Once you drive one around and se they get a bigger reaction then a Ferrari you would understand.
I went to Jeg for some parts one day in the car and cleared the store out except for the guard. Clearing a jegs store due to what you driving is a huge thing since they see a lot of great cars. I have been followed for 10 miles just so a guy could ask what kind of car is that and then he sat and stared at it for a while. This is the things that make this car great.
I do look back from time to time and regret what I done but I would do it again if I had the money.
I love camaro's and worked on the camaro and restored it for several years until I was completly happy. Then I got board and had the car and realy liked the kit and one thing lead to another and cut, cut and after cut one thier is no going back. Once you see one of these cars in person you can see why one would consider building one. The are awsome looking in person.
Once you drive one around and se they get a bigger reaction then a Ferrari you would understand.
I went to Jeg for some parts one day in the car and cleared the store out except for the guard. Clearing a jegs store due to what you driving is a huge thing since they see a lot of great cars. I have been followed for 10 miles just so a guy could ask what kind of car is that and then he sat and stared at it for a while. This is the things that make this car great.
I do look back from time to time and regret what I done but I would do it again if I had the money.
Member
iTrader: (4)
Joined: Nov 1999
Posts: 273
Likes: 1
From: Fox Lake, IL
Car: 1988 camaro sports coupe
Engine: Fast Burn 385
Transmission: 700r4
Axle/Gears: 9 bolt w/ 3.27 gears
Banned
Joined: Aug 2006
Posts: 155
Likes: 0
From: long island, new york
Car: Fire Red 89 RS
Engine: 2.8L :(
Transmission: 700r4 auto
It IS a camaro. the kit cost 7000 i think. im not exactly sure on the price but it was posted on a thread a few months back as the only body kit for our cars. I thik its gross to do that to your camaro but ppl can do what ever they want to what ever they own. do a search for camaro body kit and you should find it pretty easily. sorry i dont remember what forum it was in or how posted but its a decnt size rant about the kit like four pages long so it shouldnt be hard to find.






