firebird to trans am spoiler swap
Thread Starter
Senior Member
iTrader: (3)
Joined: Aug 2006
Posts: 559
Likes: 3
From: washington
Car: 88 Trans am GTA
Engine: 2002 Ls1
Transmission: t-56
Axle/Gears: Ford 9" 4.11 gears w/ locker
firebird to trans am spoiler swap
does the trans am spoiler bolt into the same location as the trans am spoiler?
my car is an 86 and so is the trans am spoiler. if not will i just have to drill more holes? or completely differant ones?
my car is an 86 and so is the trans am spoiler. if not will i just have to drill more holes? or completely differant ones?
Senior Member
iTrader: (2)
Joined: Nov 2001
Posts: 920
Likes: 0
From: AL,USA
Car: 1990 Formula
Engine: 95 LT1
Transmission: T56
Axle/Gears: Weak 7.5 with 4.10s
Re: firebird to trans am spoiler swap
If you are talking about the pedestal spoiler on the Firebird and the aerowing(wraparound design) on the Trans Am, then no. You will have to drill some holes and fill some holes. Why not switch the entire hatch?
Member
iTrader: (2)
Joined: Jan 2007
Posts: 197
Likes: 0
From: haverhill MA
Car: 89 formula, 89 Cadillac Brougham
Engine: 355,HSR,patriot alum. heads,TFS cam
Transmission: 700r4, 2500 B&M stall, shift kit
Axle/Gears: 3.73 ten bolt, powertrax locker
Re: firebird to trans am spoiler swap
you don't need to swap the "hatch" just the decklids. just unbolt the 10mms from under the interior panel and use a putty knife to separate the decklid from the glass. do it on a hot day so the adhesive is more plyable. use windshield adhesive to stick it back together.
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM
