90camaro420

Ok here goes 1991 camaro z28 horrible shape i saved it from the crusher noone wanted to tackle the body issues.. First off the exaust IS made of fencing welded together. 2nd the thrush mufflers are sticking so far out of the back it makes me wanna strangle the previous owner who i hope is reading this. No tips. Just mufflers stickin out, The dash cap isnt screwed on at all, mirrors are falling off the doors, Yea i bought it for the 350 tpi in it . DID i mention the front body valance is a diff year then the cone,.. WOW wt crap people? Really? lol

xxKing Cottonxx

um, a friend told me .
and thats not why my name is king cotton

Chevy86 IROC-Z

iTrader: (17)

Okay. I put 2 and 2 together and I was like . gentlemen.

xxpotandaxx

Must be one of those special edition irk z's Gm couldent aford that expensive ( o )

Big Cleatus

I don't do ghetto stuff to my car, I'm a perfectionist. However, I use to work with this guy who had a dodge ram. He liked the look of carbs with open air elements and so he crafted one himself. He connected PVC pipe from home depot to his throttle body and put a cone filter after the 90 degree bend. It looked so hilarious I couldn't help but laugh hysterically. He didn't even paint the PVC. He kept it white with the manufacturer stamps still on it. It had globs of RTF sealant all over it too.

JeremyNYR

iTrader: (2)

You just commented on a spelling error by writing this? I can't even figure out what you were trying to say.

'87IROCZOWNER69

iTrader: (1)

I like how you make fun of a spelling mistake by spelling couldnt wrong.

JeremyNYR

iTrader: (2)

you did too! haha. It's "Couldn't". "Afford" was also spelled incorrectly.

I did finally figure out what he was talking about. He was referring to the Camaro with the logo on the side that read "IRC-Z". I didn't know what he was referring to at first since he misspelled the misspelled word. Anyone here see the movie Idiocracy? I think that's where this thread belongs.

dhirocz

iTrader: (2)

I found an '85 International Flatbed in Iraq that was my driver to pick up stuff when I needed to. When I went to check the oil, I noticed the engine sitting alot lower than it should have been...the mounts were gone and the engine was welded to the frame by the manifolds

Chevy86 IROC-Z

iTrader: (17)

Motor mountless = $40,,,,,,,, Welded engine to the frame = PRICELESS......

MrPhotographer0

I say, EPIC FAIL! Its not even in remotely the right font, or right location

Chevy86 IROC-Z

iTrader: (17)

Tell me about it. ITS A RS!!!!!!!!! What a disappointment

transam85dudeman

.

Chevy86 IROC-Z

iTrader: (17)

I feel embarrased but I must admit a ghetto fix that didnt really fix the problem. I put clear weather resistant silicone caulking in-between the weatherstrip and the body of my T-Tops. Didnt work, still leaks.

Maverick H1L

iTrader: (8)

I did the same thing except for I put the sealant between the pieces of strip on the body and the tops in the corners where the latch pins are. No luck there, either. I guess my rubbers on the body are just too far shot.

Chevy86 IROC-Z

iTrader: (17)

Oh man. Me and you are on the same leaking page. Im just witing till I get my IROC running good, then repaint, then get new T-Top weatherstripping.

Maverick H1L

iTrader: (8)

Yeah, same boat exactly. Mine's getting a repaint before new weatherstripping, which is ALL shot minus the pieces on the tops themselves. Problem with my tops is that they are from a 91, so they aren't quite the right ones for my weatherstrip. Had to replace them after the old ones got broken...

Chevy86 IROC-Z

iTrader: (17)

Wow. That sucks. Hit the junkyard bro. I got an extra center T-Top for only $5 bucks. The junkyard dude wanted to charge me $45 but I told him that the weather strip was ripped on the piece so it really had no good use. It made him look like a dork so he sold it to me for $5. As I left, he sat on his rear end and started to lick his woulds caused by embarrament.

douggoud

my mom was the previous owner the camaro, till she passed it on to me, and the AC vents wouldnt stay where you want them, so my mom put folded pieces of paper, and such to keep them from moving, she even put one of those suction cup thingys under one lol

Maverick H1L

iTrader: (8)

Actually, the T-bar is the only good part... Luckily, I found a decent set in the Classic Industries catalog for around $250. But that's going to wait for the quarter panel first... (read back a couple of pages to find out that story). I'm going to go and get the repair panel either this or next week now that I have batteries for my saw (just waiting on the blades I ordered).

SKS Immortal

well since people are adding theirs i guess i could add mine. where to start? lets see its a 91 rs camaro. has a 87 iroc z 5.7 in it. the wiring harness is blocking the way to put the ac vents back into my car. the ac was completely removed. the dash was switched to the 87 iroc dash and is held on by 2 bolts and some wire tires. he tried to put a manual trans into the car and cut a huge hole into the floor board that now i have to fix. i have to re run the speaker wires since he has only the back speakers and they wires are kinda out there. o lets not forget that i have 1 of my fans hooked to a flip switch mounted under then dash. the wires that are supposed to be concealed under the dash on the driver side well lets just say they are all hanging down with the piece thats supposed to hold them up missing. o and back to the wiring harness lets see under the hood they are all held away from my headers with zip ties and god knows what else i have to do to this car. i am in the process now of removing my dash and trying to get everything back the way it goes....

Chevy86 IROC-Z

iTrader: (17)

HMMM! you have a 91 RS with a 87 IROC-z in it. How do you fit a car into a car?
Let me correct you. You have a L98 TPI from a 87 IROC. There you go. Now it makes sense.

dabomb6608

iTrader: (3)

He actually made since in his post since he said its a 91 RS with a 87 Iroc-z 5.7. But regardless going my Camaro was a hack job under the hood with wiring going every direction possible, the coolant overflow was pretty much in half, and the fluid reservoir for the clutch was missing the cap and had green tape to cover it.

Chevy86 IROC-Z

iTrader: (17)

First of all you mean "sense instead of since." And NO. A 87 IROC-Z can have a 5.7 carb setup, or 5.7 TPI, AKA L98. So with that said, it does not mean that because he stated 5.7, he meant an engine. Now if said "an engine from a 87 IROC," then his statement would of made complete sense. My bro n law has a 1987 Z-28 IROC-Z 5.7 350 TPI which is thee car and its specs, not the engine. Now if I were to refer about a engine, I would say LB9, L98, LQ9, LC1, LG4, LU5, L69, G92, WS6, B2L, and so on and so on. Now does my reply make sense (not since)?

Chevy86 IROC-Z

iTrader: (17)

Now going back to topic. Was the green tape on there when you got it?

Caveman305

iTrader: (8)

the statement "has a 87 Iroc-z 5.7" makes perfect sense, if it didnt have the 5.7 then it would make no sense at all

but i guess if he said "has a 87 Iroc-z L98" then that would be fine, even though its the exact same statement

no need to argue just because he didnt say "L98" or "350", 5.7 means the same thing in thirdgen terms

Chevy86 IROC-Z

iTrader: (17)

Your right. Just got out of work so I was a bit cranky. No argument. . Personally, when someone installs a TPI power plant into a RS,that to me is ghetto IMO.

dabomb6608

iTrader: (3)

Yes it had the tape on it when i bought it.

Caveman305

iTrader: (8)

Lol no worries just trying to divert another pointless argument,

my view on engine swaps in an rs is as long as your increasing power its not ghetto, im getting ready to swap out my 305 just havent decided if i wanna do it soomer with an lt1 or later with an ls1

Chevy86 IROC-Z

iTrader: (17)

Everyone has there own opions right? Well my IROC is supposed to have the LB9 engine but I got the IROC as a wedding gift, I then realized it had a L98. The L98 threw a rod and I rebuilt another L98. Now everything is 350 converted instead of the 305 OEM parts.

'87IROCZOWNER69

iTrader: (1)

I agree as long as there is a power increase or you atleast have a good excuse to do the swap then it isnt ghetto.

puma1552

iTrader: (1)

the muffler was going out so the exhaust was hacked off behind the catalytic converter.

sad thing about it? im the idiot who did it. day before senior year started. the most embarrassing part about it? its still like that, and i hacked it off in 2002.

never did get that exhaust i figured it would force me to have to spend money on (id wanted a catback badly but had to repair too many other bogus things on the car just to make it run so i figured if i hacked it off it wouldnt take long til i got a fix it ticket, then i wouldnt/couldnt feel bad about spending money on a catback...but ive never been stopped for it and really never had the money for it.

my how i lust for a GMMG.

so, so embarrassing having the exhaust hacked off like that for 9 years. *facepalm*

douggoud

lol, at least your exhaust pipes arent rusting off like mine are, lol, you can think of it that way

Chevy86 IROC-Z

iTrader: (17)

Hey. I use to live in Hemet. I would drive through Menifee to get to Lake Elsinore. I see your Camaro is a 2 tone color. LOL, So is mine!

383 Power

iTrader: (2)

Here's one for ya. I just got in from working under my hood. I had a Spider Web under there and also in the interior. The stock Gauges didn't work, so the PO Got a set of Sunpro gauges and mounted them to the bottom of the dash. He ran all the cables, tubes, leads, etc through a hole in the firewall and ran them along the dash to where they met the gauges in the center. Here's the funny part. Each of the 3 gauges had a light. The PO wired all three Red wires together and connected them to the stereo power wire. the ground wires were each run individually through the firewall to the engine bay and back across to the passenger side where they were routed along the fender to the negative pole on the battery. There, they were attached to the terminal with the bolts that hold the Ground strap to the Terminal. The Wires themselves were NOT secured in any way. they were just flopping around. Why didn't he just spice them together and attach them to a steering column bolt or something? Why did they have to go all the way to the battery? The Voltmeter was no different. The wire that's supposed to measure voltage was routed in a similar way to the ground wires, except, he cut the alternator wire right in the middle and spliced it in. in all cases, he used electrical tape. I spent 2 hours tracing and rerouting. The pic is of the EXTRA wires that i removed. Yes, I AM SURE that those wires were not needed. There is still more that needs to be done, but i can only do so much at one time before i get disgusted.

Chevy86 IROC-Z

iTrader: (17)

Nice job cleaning out the mess. When I got my IROC, I had to rewire all the wires that are close to the battery. There was so much splicing involved. I made it look cleaner now but I would love to rewire to make it look stock. Does anyone have a picture of there stock wiring that is located next to the battery?

douggoud

lol, its matte and (barely) gloss now, lol, hell, if i do get this thing repainted, i wont have to sand to much of the car to have it painted, lol, but i wait for the day that my car looks like this:



*shudders* .........so beautiful, lol, and red,

joepackersrock

I haven't taken the time to read through everything, but im pretty sure this has never been done. A couple years ago when my neighbor down the street got his black Iroc we were looking at the terrible mess it was and he showed me the inside where an ac power inverter was plugged into the ciggarette lighter, plugged into that was an orange extension cord which ran through the fire wall, and under the hood to the "radiator fan" which was actually an ordinary lasko box fan like you've got in your bedroom. Needless to say the car had some overheating issues.

Chevy86 IROC-Z

iTrader: (17)

This one sounds like its almost too good to be true. How was the box fan mounted? I dont think that your statement is true. I mean, it would be cheaper to hit the junk yard and buy a used radiator fan, rather than buy power inverter and a heavy duty extention cord, and a box fan. Besides, even if it was feasible, why run the orange wire through the cabin when you can easily splice the wires from the inverter to a "ignition hot" wire in the engine bay? Im not saying that you are not being honost, Im just saying that your claim doesnt sound true, at all.

joepackersrock

wasn't mounted at all, it was just sitting next to the engine sort of on top of the steering column shaft, it was one of those smaller dual little box fan things and I have no idea what the reasoning would be for it, unless they were just out on the road and wanted to try something to get it home when the other fan bit the dust. And I know it sounds unbelievable and I dont have a picture of it, I almost didnt post it because I figured someone wouldnt believe it and low and behold someone doesnt. But whatever way you want to take it its up to you.

Chevy86 IROC-Z

iTrader: (17)

Thats crazy man. I just cant imagine how someone could do such a thing. Well you did reply and I must say that it is F'n ghetto. It would of been nice to see a picture of that setup. Checkout post #577. I found that RS at a K-Mart here in the area that I reside in. Complete dissapointment. Makes me wanna the owner.

douggoud

god, my car has troubles in stop and go traffic (well, it did when it was running a few years ago, so i'm assuming that they're still there, lol) it always overheated when in traffic, so, i would figure that (by the fact that i've seen plenty of topics concerning overheating already in the one thread) a fan wouldnt help too much more than a radiator, or at all for that matter, probably would make things worse

02SLPTransAm

iTrader: (3)

I just bought a 1992 Firebird for a parts car to fix my 1991. I didn't notice it when I bought it because I wasn't too worried about whether it ran or not because I just needed body parts. I did notice that the keys the guy gave me didn't have the chip in it. It was just a regular gm key. I didn't think much of it at the time, just figured the ignition was changed out. However I was under the dash looking at the fuses and noticed that the there was an ignition switch rigged into the wires under the dash. It has the gm key that has the chip in it. I could not believe it. GHETTO!

joepackersrock

Wow that is a pretty miserable specimen of a camaro...I wonder how on earth they could miss the "O"?

joepackersrock

that is just about as ghetto as it gets...and the vats still works! you just have to take both keys with you when you go

02SLPTransAm

iTrader: (3)

Ya I truly couldn't believe it. I asked the guy when I bought it and he just played dumb about it. I'll have to take a picture and upload it tomorrow so you all can see.

Maverick H1L

iTrader: (8)

That's one of the ways listed to bypass the VATS. Maybe something happened to the lock and the PO needed to replace it but couldn't afford the VATS lock, so he got a cheapie.

However, talking about ghetto-rigged VATS... My car didn't originally have it, and I needed a cheap way to create the VATS signal, so I put a used VATS module in and ran wires down under the console where I have a removable resistor "key" I made from parts I got at RadioShack. I don't mind carrying both keys, although the ring can get heavy with all of those keys.

Nexaura

I picked up my 1986 Trans Am and the catalytic converter had one bolt in it and the other side was filled with silicine to "stop the leak" lol, also the momo had used a 2x4 with nails in it to "lean the ice off the windshield" lol

Chevy86 IROC-Z

iTrader: (17)

Phoenixfire1989

My ex's 97 camaro had that done. It was used at atco raceway. We were told it was done to get more horses out of it while racing