Im sure every single f- body owner has had this problem. The bottom right of the seat ripping, guess through rubbing against clothing or somthing. Anyway it looks horrible cause it looks like a big hole and i want to order a new one(just driver side seat)and was wondering if anyone knew where they might sell one for an affordable price. I would call GM but im afraid to hear the price. The seat im looking for is for the 92' camaros with the camaro signature in it and hopefully they sell tan cloth seats not leather. thanks

------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

 

http://www2.theworldataclick.com/00090711495851/ <-- Thirdgen Resources

http://www.tacreationsusa.com/ <-- Trans Am Creations...I have dealt with them personally and have been very satisfied to date with them.

Carl
CarAudio Resources
http://www.caraudioresources.net

 

Man, I would just keep my eye out for a junked 4th gen and snag em. You would still have the Camaro emblem on them. Ive been looking for over a year, but its not every day that you see a junked f-body in Germany...

------------------
91 Z28 305 tpi
plans for 383
jet-coated TES headers
flowmaster cat-back
To be installed: SLP cam, TPIS shocks/struts, 170 stat, B&M shift kit, TPIS fuel press. regulator

3rdgeners in Europe: CLICK BELOW!

http://www.fbodyeurope.cz28.com

[This message has been edited by gregz28 (edited March 13, 2001).]

 

why dont you just have it fixed , it will probably be around $100

 

Is it that cheap to repair. I know i gotta go around and check places but i really dont know where to start. I live in the NEW YORK area and i havent seen any interior repair shops.

 

I don't know how far you are willing to travel, but here in Brooklyn, I know of 2 automotive upholstery places on McDonald Ave that could do the repair. I'll try to get their addresses for you. Or look around your neighborhood for furniture reupholsterers. I'm sure if you remove your seat and bring it to them, they can do it. Can't be any harder than a recliner.

[This message has been edited by Nightcruzer (edited March 14, 2001).]

 

TA Creations is your best bet. Lots of nice seats for a great price.
http://www.tacreationsusa.com/

 

the brooklyn area is about an hour away from where i liv so its not bad a drive. I would aprreciate their adresses if possible. If u have any other upolstry(i know mispelled) shops in flushing Queens i would also appreciate that. If repairing the set isnt possible i guess ill try tacreations.

------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

 

????? r u gonna post the areas.