I'm replacing the nose cone on my 88 SC with an IROC cover and i'm not sure how i can get to the four bolts that attach near the fenders. Any hints on how to do this? Any way besides taking my fenders with it? Any help would be greatly appreciated. Thanks.

 

I did this awhile back and don't remember exactly, but i don't remember it being too difficult, You dont need to take the fenders off for sure. I think I did the lower bolts from underneath and the very top bolt from above. If I could look at my car I'm sure I could help you out more, sorry.

------------------
90 IROC 5.7l (L98)
ram air, K&N's, air foil,Flows

LIKE A ROC

 

Here's a pic with the front of mine off... an air ratchet made it easy to reach up into the fender to get those 4 bolts.

 

Just take off the black plastic underneath and reach up with a wrench or rachet, it's not hard at all.

 

you do realize that an '88 sc nose is an iroc nose, or rather is the same part #

------------------
1988 Camaro Sport Coupe
2.8 V6, TCI 3200 Stall TC, B&M Transkit, 2.5" 80 Series Flowmaster & Catback, '85 Firebird SE 3.73 Rear (in spring)
'83 Z/28 Hood, '87 IROC Wheels, '92 Z/28 Bowtie Grille, IROC Gauges, IROC Taillights, IROC Foglamps

1985 Firebird SE
2.5 I4, T-5, 3.73 rear (going to the sport coupe)

 

You probably need a deep socket, too...

------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!

 

true, 85-87 iroc/z28, and all 88-92 are all the same bumper cover i believe.

 

Evilcartman, your a 7mm cheater.lol

------------------
Kenney
82 Trans Am WS7 notchback
83 Trans Am WS6 T-tops
72 Vista Cruiser 455
90 Olds Trofeo
80 K-10 w/snow plow
Painter @ Chevy dealer
GM junkie