Anyone have information on where I can get T-Top shades? I have seen them on 3rd gen cars but who manufactures? I checked dealer and no luck.

------------------
87 Iroc 5.7, AFR190, SLP Cam(218/224), SLP 1 5/8 headers & cat back, Random CAT, SLP Runners (matched intake-runners-plenum), 48mm TB, 6E(arap) chip, Vigilante & Probuilt trans.

 

there are some on e-bay right now for $40.00 (well thats what they were earlier today)

 

Someone had a pic of some kind of t-top shades, they were hard black plastic--never seen those before. Sound familiar anybody??

 

dunno about the hard black plastic, but mine are cloth and match the headliner of course...they came with the car, so i don't have any info on where to find them, but just adding my .02 that they are cloth and are original to car

 

I was some on ebay:
http://cgi.ebay.com/ebaymotors/aw-cg...425499&r=0&t=0

 

I think the hard plastic one's are what come on 4thgens, that's what I had in my 98 WS6....they suck compared to my nice soft GTA one's

------------------
www.TransAmGTA.com THE 3rdgen Firebird Site!
1992 GTA (226 made), 1 of only 18 "Dk. Jade Met." 92 GTA's, My Window Sticker, LB9, 700R4 4-Speed, T-Tops, Grey Leather, every available option except G92, J65 and U1A.
Current Mods/Upgrades: 80 Series Dual Outlet Flowmaster, TPIS Air Foil, K&N Air Filter, and Mobil 1.
Future Mods/Upgrades: None but a complete restoration.
Best Track Time: 14.6sec@96.6mph

"If it ain't broke, fix it til it is!"
Webmaster www.TransAmGTA.com
My 3rdGen Firebird Message Board!

[This message has been edited by 92GTA (edited April 28, 2001).]

 

I made my own. The OEM type are no longer made. In fact the guy at the parts place tried convincing me that they did not exist period, and that I was confused with 4th gen pieces...

I went to the local craft store and bought these pieces of black "cardboard" type material. I can't remember what the true name of the stuff was. Anyway, the pieces were almost a direct fit, only slight to big. I just cut them to fit, using my brother's GTA shades as a template. I added black cloth to the black cardboard, and the result looks great.

I would suggest that if you use a set of existing GTA shades as a template, that you give yourself a little more material on the corners than the OEM pieces. I can see a little light sneaking in on both mine (home-made) and my brother's (GM).

Total cost...$10-$15.

 

You could just paint them (on the inside) too.

------------------
My Firebird
Your Car Here?
Part Diagrams

-Welders get better penetration

 

I did the same thing as andrew,but wrapped them in the headliner material.

------------------
~mike~86 IROC-Z