Calling All LS1 BRAKE UPGRADES LETS SEE EM
05-23-2007, 12:46 AM
#51
TGO Supporter
Join Date: Sep 2000
Location: So.west IN
Posts: 6,775
Likes: 0
Received 26 Likes
on
23 Posts
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
Re: Calling All LS1 BRAKE UPGRADES LETS SEE EM
Hey Robert, sorry for the delay.. this post has slipped my mind as of late (due to purchase of a new dwelling & garage/shop).
The clearance from caliper to diameter of the wheel is roughly .187" - .250"
Caliper to face.. I couldn't tell you offhand. I won't be in my shop untill the holiday weekend.. I could get you a measurement then if you're still needing it.
1991cam.. thank you very kindly
The clearance from caliper to diameter of the wheel is roughly .187" - .250"
Caliper to face.. I couldn't tell you offhand. I won't be in my shop untill the holiday weekend.. I could get you a measurement then if you're still needing it.
1991cam.. thank you very kindly
06-04-2007, 09:22 PM
#52
Junior Member
Join Date: May 2005
Location: westland, mi
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 iroc
Engine: sbc
Transmission: 700r4
Re: Calling All LS1 BRAKE UPGRADES LETS SEE EM
heres my hybrid (ls1 calipers, c5 brackets and rotor) behind slp 3rd gen zr1 wheels 
06-20-2007, 01:19 PM
#53
Junior Member
Join Date: Jun 2007
Location: South Texas
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Indy 500 Pace Car Replica
Engine: Stroked 350 (385ci) TPIS Mini-Ram
Transmission: 6-speed
Axle/Gears: Stock w/Disks and 4.10's
Re: Calling All LS1 BRAKE UPGRADES LETS SEE EM
LS1 Upgrade comming soon! 
In the process of cleaning and preping for LS1 all the way around. Found a donor 98 V6 and picked up all calipers, brackets, e-cables, rotoes and master cylinder for $190.
Looking for Mounting brackets and braided lines to finish project. Who do you recomend to buy from? Ed Miller or BigBrakeUpgrade?
Thanks for all the Bad A$$ info on this board,
In the process of cleaning and preping for LS1 all the way around. Found a donor 98 V6 and picked up all calipers, brackets, e-cables, rotoes and master cylinder for $190.
Looking for Mounting brackets and braided lines to finish project. Who do you recomend to buy from? Ed Miller or BigBrakeUpgrade?
Thanks for all the Bad A$$ info on this board,
Thread
Thread Starter
Forum
Replies
Last Post
