ebmiller88

iTrader: (7)

If it's a 10 bolt disc axle yes. If it's a 9 bolt you'll need other plates.

Ed
----------
Pm sent.

Ed
----------

Pm sent.

Ed

GregWestphal

iTrader: (1)

How much for the brackets? Please PM me.

Thanks,

Greg

ebmiller88

iTrader: (7)

PM sent..thanks!

Ed

85camarojunkie

Hey ED site is looking GREAT...
Was curious, I have your brackets on my 85 10Bolt with PBR's. I'm looking into buying a 4th gen rear. Does it have to be a 93-97 and if it is drum will the same brackets work. Or if i can use a 98-02 will they also work..

Also which rears to look for, like z-28's or RS let me know

Thanks KEVIN

HP52TA

iTrader: (4)

Hey Ed, It was good talking to you about my braking solutions.

Just wondering if a guy could install a C-clip eliminator kit (10 bolt) with this brake upgrade?
http://www.moserengineering.com/Page...iminators.html

Justins86bird

please pm me with a price quote. thanks

KJZ28/TA

iTrader: (1)

Ed,
I am finally getting around to this swap. I am probebly picking up a set of used calipers, rotors, pads for $90.

So I need to know how much for the brackets/hardware(10 bolt) e brake cables and proportioning valve. I think that is all I need. Can I have the price w/ and w/o the braided lines? Thanks

PM me.

By the way my brother and I LOVE the C4 brakes!!! Amazing!

Deets

Hello

My name is James Franklin...I've read your thread on the brake conversion..I'd like to ask if you will price a full kit with all the lines and E-brake cables every thing stock...for my '92 Camaro RS.

More important is how much time do you need before you can ship it all out and how do you want paid. This is my next project.....New A/C is good and cold...Vat system all good....tires...shocks...ect.

My car is in pretty good shape and not a lot of rust involved.

Thanks for your time and having these things to make the work easier....

BluFBdy

iTrader: (1)

Hey ed i beleive i spoke to you about my pbr setup im trying to complete, autozone had a mixup when i returned the set of pbr calipers i ordered because i was gonna put it on hold, and they ended up screwing up and sending me another set of pbrs without charging me for em, hey who doesnt appreciate free stuff huh? My question is ive already got a disk rear with a 3.73 posi out of a saginaw, im chucking the old iron brakes in light of my new calipers what else will i need to complete it? I know i need carriers and i think backing plates/ rotors etc... right? Or could i mount these up to the old ones with no problems? If you could shoot me the parts needed with a price quote that'd be awesome

Any help would be appreciated

rhit_rs

iTrader: (1)

Count me another satisfied customer! The new rear brakes are great. I've put over 500 miles, a track day, and an auto-x on them with nothing but great braking! I also just recently upgraded to LS1 fronts with the use of Ed's parts and wow, what a difference from stock. I can now brake much later than with the stock brakes...enough to scare auto-x passengers.

ebmiller88

iTrader: (7)

He he..thank you Sir!

Ed

ebmiller88

iTrader: (7)

I'll have to look into it, I'm currently working on a '55 Chevy with that style axle so I can give a reply to this question soon. Thanks!

PMs replied to.

Ed

ebmiller88

iTrader: (7)

The plates will not work on 4th gen rears as they use the standard 4 bolt "disc" pattern but I do have plates that will work.

Ed

85camarojunkie

I guess ill have to wait for th right rear end to come along. But the Pads, Rotors and calipers are the same. HHMMM.. Odd, all that is different is the bolt pattern that holds brackets on.

baddream311

Hello Ed, iv been thinking about changing my rear drum breaks to disk breaks. Iv got a base 97 Camaro stock V6 (3.8) with a 5 speed tranny (in a couple years ill be looking into swapping the V6 and tranny out to an LT1 with a 6 speed(and possibly upgrading the front disks so that i know ill be able to stop the beast without a problem)). can you please PM me and let me know what all and the pricing for everything ill need to make the change from drums to disks-(plates, lines, cables and so on)? and will i need to get a different master cylinder to match?
Thanks so much
Joel

gearhead0384

iTrader: (7)

Impressive. Ed you never seace to amaze me.

Great job!

ebmiller88

iTrader: (7)

Joel, PM sent.

Gearhead, thank you. If you could please send me (e-mail or link) to some restoration or final pics of your car as I can (hopefully) get mine painted this year and actually drive the thing around. I have the same paint color but with the gold trim. Thank you Sir.

Ed

gearhead0384

iTrader: (7)

For the guy who made my front brake kit, no problem.

Kevin

mad mike

ed i am new to this i got a 1987 camaco iroc z will these fit and how much $
mountainmanrvpark@frontiernet.net

ebmiller88

iTrader: (7)

They'll fit, I'll shoot you a PM in a bit. Thanks!

Ed

skinny z

Any experience with the Dana 44? I've just picked one up and it only has the backing plates. Aperion (a forum member) says it's set up for the later model PBR discs and rotors.

ebmiller88

iTrader: (7)

I saw your post, great buy. '89-97 brake parts will bolt right in. Good luck!

Ed

SLoV

howdy

can you price me up some parts to convert my rear drums to disk brakes please,


for the front im currently going to get the wilwood 14" 4 spot FDL P/S Front Kit 82-90 Camaro/Firebird for the fronts,

could you price me up a kit to do the rear in 12" or 13" and using wilwood compontents so it will match ?


also some freight costs to melb , australia?

thx

I H8 WWD

iTrader: (5)

FIXED, I was like wait...he WANTS drums. Unless you realy do...then I made an oopsy

SLoV

lol nar rear drums to disk brakes

mad mike

Hi ed, is this the list that will fit my car can you email it to me so i can print it.
thaunk you Mike by the way I got the parks

ebmiller88

iTrader: (7)

Sent you an e-mail, Mike..thanks!

Ed

pearl83SS

I have 97 firebird calipers and wondered if the 1997 11.6" rear rotors would work with the axles. I dont want to have to do any machining to my aftermarket moser axles. Also, would this whole setup work with the stock 15" 1983 Monte Carlo SS rally rim? I can grind some cooling fins off the top of the calipers for clearance, but how much space will this leave me?

ebmiller88

iTrader: (7)

Yes, they will work fine with the Moser axles and the 15" wheels as well. You shouldn't need to clearance them at all. If you can find someone with the stock '89-92 rear discs on their car, try to test fit your wheel before you do the upgrade.

Ed

sparky85

hey ed i was wondering how much you sold them rear disc brake kits for.

ebmiller88

iTrader: (7)

PM sent.

Ed

greg320

iTrader: (1)

Hey ED ,

Installed your PBR brackets last week, this setup works great. I have a 92RS originally drum, used OEM disc ebrake cables for 92, the ebake does nothing. Is there an additional step I am missing, or do I need some different parts.

For those of you out there stil using those old drums, I can highly reccomend Ed's rear PBR setup. What a difference!

Thanks

Greg

JAMES LOWE

how much do the brackets & calipers cost? I also have some slotted & drilled rotors that are 12" will they work, they are for a 99 camaro.

JAMES LOWE

How much is the brackets & calipers & will they work with some 12" ROTORS FOR A 99 CAMARO, ALSO WHERE DO I GET THE KIT FROM

BladeQuarter

his website is http://www.flynbye.com/

Also will the 11.6 upgrades work with 15 in rims??

ebmiller88

iTrader: (7)

Yes the 11.6" rotors will fit 15" wheels, and they only work with the '89-97 style rotors and calipers and NOT the '98-up LS1 style rotors. Those are a different design.

Ed

ebmiller88

iTrader: (7)

The e-brake may need adjusting, there's a thread on here somewhere on it or search for "caliper fine adjustment" or something like that, JamesC may have the link somewhere.

Ed

JAMES LOWE

I have some 12" rotors off a 99 camaro can i use those with the brackets & how bout the calipers also

TKEY

I have a 1986 disc brake rearend in my 1988 camaro, but I bought rotors for 1988 rearend with 11,5 rotors. I'm just trying to see if they make brackets and calipers that will bolt up to my rearend that I can use with 11.5 in rotors and where do I get them from?

ebmiller88

iTrader: (7)

No, as I stated earlier it's a different design and the parts will NOT interchange. If you want to install your LS1 rear discs you can do that but you'll need LS1 specific backing plates. PM or contact me for more info.

Ed

ebmiller88

iTrader: (7)

Those will be the same rear discs, '83-88 rear discs are all the same and they switched to the PBR rear discs in '89-97.

Ed

BladeQuarter

Thanks that is one of the main factors I was looking at that was keeping ,me from upgrading. I want to keep my 15, most other sets wouldntfit them...

I will be buying a set of yours within the next coupla months

JAMES LOWE

will the calipers off a 99 camaro rear work with the brackets? and 12" rotors

BladeQuarter

He allready answered your question

JAMES LOWE

where can i get the LS1brackets from and how much? is install the same

JAMES LOWE

may i get a price for some LS1 brackets and where to get them from for my disk conversion for my 84 Z28 camaro? thanks for the help

PS116:16

iTrader: (1)

ed, i am new here, i have an 89 rs, but i put a 91 iroc rear end on it, can i do the break upgrade your thread talks about, and if so do you have any of the supplies left to do it. Please email or thread back the cost and so forth. thanks

PS116:16

iTrader: (1)

hey ed, i got the info, but i am still trying to navigate the website, yea we are in byron at the peach outlet on a regular basis, let me know the next time you come over and we will chat

85camarojunkie

Quick question on the front barkes not to throw anyone off subject. But the brakets to install slide on rotors on a standard hub on our car, is that only for the 98+ brakes or 93-02? I have machined hub and spindles just curios if i got your brakets what years i can use thanks...

mooch1

where do i get this kit?..and how much?