Prop valve brake line threads
Thread Starter
Member
Joined: Aug 2007
Posts: 282
Likes: 1
From: Birmingham, AL
Car: 1991 Camaro RS
Engine: 355
Transmission: 700R4
Axle/Gears: 10 bolt Richmond 3.73 posi w/ discs
Prop valve brake line threads
I bought a used proportional valve and the front bottom brake line port was boogered up and is cross threading. Does anyone know if that port is a M14 or M16 x 1.5? I figured I could at least try to clean up the threads since its only a row or two in.
Thread Starter
Member
Joined: Aug 2007
Posts: 282
Likes: 1
From: Birmingham, AL
Car: 1991 Camaro RS
Engine: 355
Transmission: 700R4
Axle/Gears: 10 bolt Richmond 3.73 posi w/ discs
Re: Prop valve brake line threads
Fixed the threads. Its a M14x1.5 for any future reference.
Junior Member
iTrader: (5)
Joined: Apr 2010
Posts: 7
Likes: 0
From: Seymour, IN
Car: 10 Camaro SS
Engine: Stock LS3
Transmission: TR6060
Axle/Gears: Factory LSD 3.45
Re: Prop valve brake line threads
I know I'm bringing up an old thread here...but someone aught to make a sticky with ALL brake line fittings, year ranges, etc...took me what I thought was far too long to find this.
Thread
Thread Starter
Forum
Replies
Last Post
