9Bolt
07-09-2019, 06:42 AM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: ohio
Posts: 170
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Trans Am
Engine: 355 Carb. Nitrous 100 shot
Transmission: TCI Performance Trans. 350 Turbo
Axle/Gears: Borg & Warner 9 bolt 3.70 gears
9Bolt
I have a Borg Warner 9Bolt that I replaced my 10 bolt with in my firebird. It has the staggered Calipers. (one towards the front and one towards the rear) . I seen a camaro that had a Borg Warner with the PBR brakes and both were towards the rear. I would like to look at switching these calipers I have over to PBR, but I am not sure of what is needed to do so. Different backing plates? Will E-Brake cables still work for that set up?
07-09-2019, 07:19 AM
#2
Re: 9Bolt
You'll find everything you need in the following link:
https://www.thirdgen.org/techboard/f...iscs-89-a.html
JamesC
https://www.thirdgen.org/techboard/f...iscs-89-a.html
JamesC
Thread
Thread Starter
Forum
Replies
Last Post
norcalz28
Transmissions and Drivetrain
8
01-24-2004 09:48 PM
southerniroc
Transmissions and Drivetrain
7
04-05-2001 01:47 AM
86Tra/maro
Transmissions and Drivetrain
1
03-27-2001 02:00 AM
MikeT 88IROC350
Transmissions and Drivetrain
3
10-21-2000 04:28 PM