Master cylinder clearance problem.
Thread Starter
Member
Joined: Dec 2003
Posts: 489
Likes: 0
From: wv
Car: 92 rs
Engine: 355 stealth ram, dart heads, S480
Transmission: 4L80E
Axle/Gears: 3.42
Joined: Sep 2005
Posts: 27,933
Likes: 2,454
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Master cylinder clearance problem.
Looks like a header interference problem, not a master cylinder problem. The MC looks just fine.
Best thing to do would be to get headers that fit.
Best thing to do would be to get headers that fit.
Junior Member
Joined: Feb 2019
Posts: 37
Likes: 2
Re: Master cylinder clearance problem.
1982-1987 G-body Master Cylinder
*Left hand side outlets
*Standard Inverted flare outlets - 9/16-18 front port and 1/2-20 rear port
*Same master cylinder bore as a thirdgen F-body.
1998-2002 Right Hand Drive Postal S10
*Left hand side outlets
*Standard Inverted flare outlets - 9/16-18 front port and 1/2-20 rear port
*1.0" strait bore master cylinder
1998-2002 Left Hand Drive S10
*Right hand side outlets like thirdgen F-body
*Standard Inverted flare outlets - 1/2-20 front and rear ports
*1.0" strait bore master cylinder
*Left hand side outlets
*Standard Inverted flare outlets - 9/16-18 front port and 1/2-20 rear port
*Same master cylinder bore as a thirdgen F-body.
1998-2002 Right Hand Drive Postal S10
*Left hand side outlets
*Standard Inverted flare outlets - 9/16-18 front port and 1/2-20 rear port
*1.0" strait bore master cylinder
1998-2002 Left Hand Drive S10
*Right hand side outlets like thirdgen F-body
*Standard Inverted flare outlets - 1/2-20 front and rear ports
*1.0" strait bore master cylinder
Thread
Thread Starter
Forum
Replies
Last Post
spills
Transmissions and Drivetrain
5
Jun 17, 2008 09:15 PM
