[AZ] convertible wanted
Thread Starter
Junior Member
Joined: Nov 2010
Posts: 12
Likes: 0
From: Arizona
Car: 1979 Camaro
Engine: 305 5.0 Tpi
convertible wanted
85-92 convertible. Z-28 or IROC maybe an Rs but has to be V8. under 5k
please let me know, it can be a project car, not looking for something thats completely done thanks
please let me know, it can be a project car, not looking for something thats completely done thanks
Supreme Member
iTrader: (33)
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
Re: convertible wanted
1992 Camaro RS Convertable
121,000 miles on chassis. Less then 1000 miles on engine.
Car needs painted.
Missing center piece of spoiler. (never looked for one because I planed to add my 92 hirise spoiler)
Has :
New Black viny Top
new black carpet
Harwood 3inch cowl hood
new grill
Black interior in good condition. Small hole in D.side front seat.(smaller then a quarter.)
17" 10 spoke rims 2inch skulte spacers , with kuhmo escta supra 275/40/17 (65+% life left)
Polly motor mounts
Alloy eng. caster/camber plates
Engine Info:
'94 LT1 383 Stroker
Callies racemaster crank, Callies Pro I rods. Everything been balanced
JE -33cc dished pistons.(Thermal Coated) with Hellfire rings
stock ported heads (Thermal coated valves and chambers)
All coated Clevite bearings
All ARP Bolts
comp xfi cam 224/236 @.050 .502/.510 with 1.5's
Polished valve covers & fuel rails.
Intake has been converted to run Distributor. (no more opti spark)
MSD PRO Billet Distrib.
LT4 timing chain set
50lb Injectors
Novi 2000 Super charger 7.65 crank 3.5 sc pulleys
innovate motorsports lc1 wb o2 setup.
csr Electric water pump
3bar map sensor
Canton Road race oil pan & pick up.
An fitting and braided lines for Power steering pump and supercharger oil feed and return.
stainless SLP Headers and Y pipe. 3chamber flowmaster where cat use to be with turn down
Built Th400 , transgo shift kit. deep aluminum pan
PTC 3500 converter.
9 bolt rear with 3.45's
Spohn adjustable trq arm and crossmember,(TRQ Arm mounts to the crossmember NOT the tranny) (t56 crossmember (t56 was future plan)
Comp. Eng. Main Hoop for a 8point roll bar welded in. Never got around to finishing the rest.
Running on $59 code with the 7730 ecm.
Havent been motivated to work on it. Need to finish a new intake to sc tube. (was pcv mocked up) and some good driving to datalog and tune it.
Few pic's
Engine pic's when I tore it down to freshing it all up.
http://www.cecoatings.com/images/Car...20pistons2.jpg
http://www.cecoatings.com/images/Car...1/DSC04298.JPG
http://www.cecoatings.com/images/Car...1/DSC04297.JPG
http://www.cecoatings.com/images/Car...1/DSC04318.JPG
http://www.cecoatings.com/images/Car...rfolk%20Beach/
Video of current state.
http://www.youtube.com/watch?v=ZJofTL0rMmA
Car is located in FL. So if your interested well go from there and talk $ and shipping.
121,000 miles on chassis. Less then 1000 miles on engine.
Car needs painted.
Missing center piece of spoiler. (never looked for one because I planed to add my 92 hirise spoiler)
Has :
New Black viny Top
new black carpet
Harwood 3inch cowl hood
new grill
Black interior in good condition. Small hole in D.side front seat.(smaller then a quarter.)
17" 10 spoke rims 2inch skulte spacers , with kuhmo escta supra 275/40/17 (65+% life left)
Polly motor mounts
Alloy eng. caster/camber plates
Engine Info:
'94 LT1 383 Stroker
Callies racemaster crank, Callies Pro I rods. Everything been balanced
JE -33cc dished pistons.(Thermal Coated) with Hellfire rings
stock ported heads (Thermal coated valves and chambers)
All coated Clevite bearings
All ARP Bolts
comp xfi cam 224/236 @.050 .502/.510 with 1.5's
Polished valve covers & fuel rails.
Intake has been converted to run Distributor. (no more opti spark)
MSD PRO Billet Distrib.
LT4 timing chain set
50lb Injectors
Novi 2000 Super charger 7.65 crank 3.5 sc pulleys
innovate motorsports lc1 wb o2 setup.
csr Electric water pump
3bar map sensor
Canton Road race oil pan & pick up.
An fitting and braided lines for Power steering pump and supercharger oil feed and return.
stainless SLP Headers and Y pipe. 3chamber flowmaster where cat use to be with turn down
Built Th400 , transgo shift kit. deep aluminum pan
PTC 3500 converter.
9 bolt rear with 3.45's
Spohn adjustable trq arm and crossmember,(TRQ Arm mounts to the crossmember NOT the tranny) (t56 crossmember (t56 was future plan)
Comp. Eng. Main Hoop for a 8point roll bar welded in. Never got around to finishing the rest.
Running on $59 code with the 7730 ecm.
Havent been motivated to work on it. Need to finish a new intake to sc tube. (was pcv mocked up) and some good driving to datalog and tune it.
Few pic's
Engine pic's when I tore it down to freshing it all up.
http://www.cecoatings.com/images/Car...20pistons2.jpg
http://www.cecoatings.com/images/Car...1/DSC04298.JPG
http://www.cecoatings.com/images/Car...1/DSC04297.JPG
http://www.cecoatings.com/images/Car...1/DSC04318.JPG
http://www.cecoatings.com/images/Car...rfolk%20Beach/
Video of current state.
http://www.youtube.com/watch?v=ZJofTL0rMmA
Car is located in FL. So if your interested well go from there and talk $ and shipping.
Supreme Member
iTrader: (33)
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
Re: convertible wanted
Pic's from when I picked it up as a rollin chassis , etc.. the video is a walk around also.
http://www.cecoatings.com/images/CarStuff/92%20vert/
Listed as $6500 obo in the classifieds.
http://www.cecoatings.com/images/CarStuff/92%20vert/
Listed as $6500 obo in the classifieds.
Joined: Jul 2000
Posts: 1,519
Likes: 18
From: Fort Myers, FL
Car: 91 Firebird
Engine: 6.0
Transmission: T56
Axle/Gears: 3.73
Re: convertible wanted
I have something for sale that might interest you.
https://www.thirdgen.org/forums/cama...nvertible.html
https://www.thirdgen.org/forums/cama...nvertible.html
Trending Topics
Joined: Jun 2010
Posts: 409
Likes: 14
From: Safford, AZ
Car: 1992 RS
Engine: 305 (LO3)
Transmission: 700R4
Axle/Gears: 2.73?
Junior Member
Joined: May 2011
Posts: 25
Likes: 0
Want a title? Post!
Joined: May 2011
Posts: 0
Likes: 0
Re: convertible wanted
Thread Starter
Junior Member
Joined: Nov 2010
Posts: 12
Likes: 0
From: Arizona
Car: 1979 Camaro
Engine: 305 5.0 Tpi
Re: convertible wanted
Is this yours? if so can you get me some more info please. I really like this one!
Junior Member
iTrader: (11)
Joined: Dec 2009
Posts: 20
Likes: 0
From: Cleveland ,OH
Car: ,89 iroc z
Engine: 350 tpi
Transmission: ,700r4
Axle/Gears: 3;27 9 bolt
Re: convertible wanted
im selling mine .http://cleveland.craigslist.org/cto/2488287903.html price is a little flexible.
Joined: Jul 2000
Posts: 1,519
Likes: 18
From: Fort Myers, FL
Car: 91 Firebird
Engine: 6.0
Transmission: T56
Axle/Gears: 3.73
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM