Hey guys, does any body know a forum that helps out with 12 volt installs. I need to wire up the gray wire (neg output) on a DEI 530T to a relay to bypass the shock sensor because the shock sensor tiggers the alarm sometimes. The shock sensor has 4 wires. green is shorter than 0.8 seconds neg multiplex input wire,blue is longer than 0.8 sec multiplex input, and then there is a red 12v constant, and a black ground wire. Anyone know what I'm talking about? Basicly it disables the shock sensor while the 530T is in use. I also need help installing rear 6x9s in a friends 2005 civic, I can't fiquire out how to get to the speakers themselves.

Please Help.

 

So nobody knows how to wire up a relay

 

well i know theres a site that should help its one of these 2
the12volt.com
12volt.com