hey everyone, the new performer intake and 600 cfm carb from edelbrock are in and the car is running pretty good... she doesn't wanna take off when i first hit the gas like its a little boggy but from like 2500 and up shes really snappy... that will just take some more tunning though i'm guess .. but what i wanna ask is...

does anyone know the part numbers from edelbrock for all the proper pieces i need to attach my cruise, kickdown, and throttle ?? like the little pins that go on the wires and attach to the carb and if i need like an extra attachment for the carb to get my cruise on there... and does edelbrock have a braket that will bolt on to the intake that will actually hold my linkages in the right spot for the carb or will i have to make my own or somethin ?? i don't really wanna rig this up i wanna do it right so if anyone could let me know all those part numbers for the braket and attachments and **** so i can get this right itd be greatly appreciated.. thank you so much for all your help through this project...

i would take the time to look all this **** up but i don't have a catalog and dont wanna waste time lookin on the internet and take the risk of gettin the wrong part... so i figured i'd check out everyones ideas here.. thanks agaiin


vetter

 

Summit.com has the pieces you need, just search for Manufacturer:Edelbrock.