Carburetors Carb discussion and questions. Upgrading your Third Gen's carburetor, swapping TBI to carburetor, or TPI to carburetor? Need LG4 or H.O. info? Post it here.

predator

Thread Tools
 
Search this Thread
 
Old Dec 16, 2007 | 10:02 PM
  #1  
tylersb350's Avatar
Thread Starter
Member
 
Joined: Aug 2007
Posts: 200
Likes: 0
From: Goldsboro, NC
Car: 82 camaro sc
Engine: 355 SBC
Transmission: T56
Axle/Gears: ford 8.8 3.73
predator

hey has anyone ever had any luck with a predator carb. for those of you who dont know, it is a variable venturi carb. it adjusts from 390 to 930 cfm depending on what the engine demands. i picked one up for 50 bucks but havent put it on my engine (383 stroker) yet.
thanks
Reply
Old Dec 16, 2007 | 10:35 PM
  #2  
xpndbl3's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2002
Posts: 13,622
Likes: 5
From: Orland Park, IL
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11
Re: predator

sell it to the monster truck people and get a holley carb, that predator won't fit under your stock hood, they are too tall.
Reply
Old Dec 16, 2007 | 10:43 PM
  #3  
tylersb350's Avatar
Thread Starter
Member
 
Joined: Aug 2007
Posts: 200
Likes: 0
From: Goldsboro, NC
Car: 82 camaro sc
Engine: 355 SBC
Transmission: T56
Axle/Gears: ford 8.8 3.73
Re: predator

hood clearance isnt an issue for me. does anyone know how well they run
Reply
Old Dec 16, 2007 | 11:05 PM
  #4  
five7kid's Avatar
Moderator
25 Year Member
iTrader: (14)
 
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Only one I've seen at the track in years: '91 'Bird, 400, trailered to the track - runs high 13's at 5800' elevation.

Not very impressive. But, I don't know what all they've done to the engine/car.
Reply
Old Dec 16, 2007 | 11:10 PM
  #5  
tylersb350's Avatar
Thread Starter
Member
 
Joined: Aug 2007
Posts: 200
Likes: 0
From: Goldsboro, NC
Car: 82 camaro sc
Engine: 355 SBC
Transmission: T56
Axle/Gears: ford 8.8 3.73
Re: predator

ok thanks
Reply
Old Dec 16, 2007 | 11:52 PM
  #6  
Fast355's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jan 2005
Posts: 10,404
Likes: 492
From: Hurst, Texas
Car: 1983 G20 Chevy
Engine: 305 TPI
Transmission: 4L60
Axle/Gears: 14 bolt with 3.07 gears
Re: predator

Originally Posted by tylersb350
hey has anyone ever had any luck with a predator carb. for those of you who dont know, it is a variable venturi carb. it adjusts from 390 to 930 cfm depending on what the engine demands. i picked one up for 50 bucks but havent put it on my engine (383 stroker) yet.
thanks
I played with one (Street Model with the Special low-idle fuel circuit) on a 300ish HP 305. It pulled very smoothly and had very crisp throttle response. It could not pull down quite as good fuel mileage as the Q-Jet, but got close. Would I run a Predator again if I was carb, ABSOLUTELY. The trick is experimenting with the FUEL CAM and the position of the fuel cam (you can advance/retard it to change the fuel curve).

With the low-idle circuit, my 305 would idle at 550 rpm in drive all day long, jump leaving the hole, and had smooth power everywhere in the rev-range.
Reply
Old Dec 17, 2007 | 12:00 AM
  #7  
tylersb350's Avatar
Thread Starter
Member
 
Joined: Aug 2007
Posts: 200
Likes: 0
From: Goldsboro, NC
Car: 82 camaro sc
Engine: 355 SBC
Transmission: T56
Axle/Gears: ford 8.8 3.73
Re: predator

the one i have is the race version (without the idle circuit) i have cam #1 in it right now. but thats what i wanted to hear....something positive about it. thank you....oh and would u happen to know where i could get parts for it...i cant find anyone that has parts.
Reply
Old Dec 17, 2007 | 09:57 PM
  #8  
Fast355's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jan 2005
Posts: 10,404
Likes: 492
From: Hurst, Texas
Car: 1983 G20 Chevy
Engine: 305 TPI
Transmission: 4L60
Axle/Gears: 14 bolt with 3.07 gears
Re: predator

Originally Posted by tylersb350
the one i have is the race version (without the idle circuit) i have cam #1 in it right now. but thats what i wanted to hear....something positive about it. thank you....oh and would u happen to know where i could get parts for it...i cant find anyone that has parts.
To my knowledge Predator is still around. This is the last known location, to my knowledge.

Predator
810 Cross Street, Lakewood, NJ 08701 USA
(732) 367-8487
Reply
Old Dec 18, 2007 | 09:49 AM
  #9  
MrBrooks's Avatar
Member
 
Joined: Jun 2007
Posts: 270
Likes: 0
From: Bham AL
Car: '92 RS
Engine: 357ci
Transmission: G-Force t-5
Axle/Gears: 4.10 10bolt mini spool
Re: predator

I've seen several of them at the track. Only seen1 that ran well. That guy said he had been working with it since the start of the season(it was october then). The only reason he hadn't pitched it was on principal , he was not gonna let it beat him. All the others that i've seen were accompanied by loud cuss fits, and weren't on the cars long.
Reply
Old Dec 18, 2007 | 09:55 PM
  #10  
tylersb350's Avatar
Thread Starter
Member
 
Joined: Aug 2007
Posts: 200
Likes: 0
From: Goldsboro, NC
Car: 82 camaro sc
Engine: 355 SBC
Transmission: T56
Axle/Gears: ford 8.8 3.73
Re: predator

ok thanks guys
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Red-Devil
Fabrication
9
Sep 1, 2014 09:46 AM
stomp1977
Body
14
Oct 27, 2009 09:37 PM
iroc a 86 berli
Carburetors
4
Jan 16, 2009 01:35 PM
SSC
Organized Drag Racing and Autocross
7
Dec 11, 2004 05:01 PM




All times are GMT -5. The time now is 03:32 PM.