t-handle rich and lean adjustment wrench
Thread Starter
Joined: Sep 2007
Posts: 598
Likes: 2
From: Hampton, Virginia
Car: 87 Camaro Z-28
Engine: 305 LG4 w/ E4ME carb
Transmission: 700R4
Axle/Gears: 2.73
t-handle rich and lean adjustment wrench
does anyone know where this wrench or suitable substitute is sold? 
I want the one that goes down the carb near the idle air bleed valve. Sure would like to get one... it'd make adjustments soo much faster!
I want the one that goes down the carb near the idle air bleed valve. Sure would like to get one... it'd make adjustments soo much faster!
Thread Starter
Joined: Sep 2007
Posts: 598
Likes: 2
From: Hampton, Virginia
Car: 87 Camaro Z-28
Engine: 305 LG4 w/ E4ME carb
Transmission: 700R4
Axle/Gears: 2.73
Re: t-handle rich and lean adjustment wrench
bump...
guys at parts store don't know...
online tool descriptions aren't clear...
guys at parts store don't know...
online tool descriptions aren't clear...
Member
Joined: Jan 2008
Posts: 293
Likes: 2
From: Houston, Texas
Car: 84' Z28-White/T-Tops
Engine: H code LG4 305
Transmission: TH700R4
Axle/Gears: Stock 3.23
Re: t-handle rich and lean adjustment wrench
Well this isn't a "T-Handle" but it is the correct tool for adjusting the lean stop and rich stop. From SEARS ONLINE parts #00994176000. They price it at $1.99 and then add about $6-7 for shipping. Its called a C-4 Carburetor adjusting tool and is or was made by KD Tools.
Thread Starter
Joined: Sep 2007
Posts: 598
Likes: 2
From: Hampton, Virginia
Car: 87 Camaro Z-28
Engine: 305 LG4 w/ E4ME carb
Transmission: 700R4
Axle/Gears: 2.73
Re: t-handle rich and lean adjustment wrench
- still looking for wrench to adjust rich stop if anyone had that source.
The wrench from Sears came in but was wrong size (too large to fit down adjustment hole for rich stop).
The wrench from Sears came in but was wrong size (too large to fit down adjustment hole for rich stop).
Thread
Thread Starter
Forum
Replies
Last Post
