I have seen many questions asked about where and how to install an external fuel pump for swapping over to carburetor. I did not have any pictures until I finally had to change my Holley Red fuel pump after 14 years of daily driving. I decided to take a picture and share it. I cut about 12 inches out of the original fuel feed line. Still use factory fuel filter in the stock location. I also have a hidden cut-off switch on the negative ground wire for the pump. Hope this helps somebody.

 

I would like to see this pic, but it doesn’t seem to want to open. Could you please dm? Thank you in advance.

 

something hinky happened with the upload. It should be an image not an html file.