Cars Wanted 2006 Let the world know you want a Third Gen.

looking for a 1988-1990 iroc-z or 1991/1992 z28 camaro

 
Thread Tools
 
Search this Thread
 
Old 09-08-2005, 07:49 PM
  #1  
Supreme Member
Thread Starter
iTrader: (7)
 
flaming-ford's Avatar
 
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like on 1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
looking for a 1988-1990 iroc-z or 1991/1992 z28 camaro

I'm looking for a iroc-z or z28 camaro ranging from 1988-1992. I also would consider an rs camaro of about the same vintage but,would rather deal with the z28/iroc-zs. I have $3,500 to spend.

What i would like is no rust and good/great mechanical conditions. If the paint looks like crap but, it has a rebuilt motor and trans, i definetly would not shun it away. I'm looking for something under 150,000 miles and i'm not interested in a tbi motor unless it is at least slightly modded. Btw 5/6 speeds gain pnts.

ps. i live in Centeral Ohio about 30 miles west of columbus.

Last edited by flaming-ford; 09-08-2005 at 07:59 PM.
flaming-ford is offline  
Old 09-08-2005, 08:03 PM
  #2  
Junior Member
 
cmmr512's Avatar
 
Join Date: May 2004
Location: new york
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Car: 1984 corvette 84,86 z28's
Engine: 350 cross fire 350 tpi 305 carbed
i have an 84 z28 with a rebuilt 350 tpi from an 88 formula and all new interior with ttops new tires and aftermarket rims its a nice car but it needs a windshield and the timing set also i never finished putting the door panels back on, the only other thing it needs is the female end of the front seatbelts im located in ny prolly about 10 hours away the car is solid and it deffinatly is a great car if you know how to do the interior yourself and the timing but your about 10 hours away and im not sure if the trip would be worth it to you but i have 3,200 into it and im asking 1,800 also forgot to mention it has the ss hood with all new exaust from the cat back let me know if you interested
cmmr512 is offline  
Old 09-08-2005, 08:11 PM
  #3  
Supreme Member
Thread Starter
iTrader: (7)
 
flaming-ford's Avatar
 
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like on 1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Well that is a pretty far drive but, if the car were in pretty good condition and what i am looking for, it could be worth it! Do you have any pics or videos of it? Any more info. on it?

What was included in the motor rebuild complete rebuild (pistons rings cam lifters so on.....) Btw what transmission does it have and is it rebuilt by any chance? What rearend and what rear gears? Does it have disk rear brakes? Anything else that will need taken care of other than what you listed above? What so far has been included in your 3,200 dollars in to the project other than a motor rebuild?

ps. sorry for so many questions.

Last edited by flaming-ford; 09-08-2005 at 08:16 PM.
flaming-ford is offline  
Old 09-11-2005, 08:03 PM
  #4  
Member
iTrader: (1)
 
bubba353z's Avatar
 
Join Date: Apr 2004
Location: Columbus, Oh
Posts: 195
Likes: 0
Received 0 Likes on 0 Posts
Car: 07 Honda CR-V
Engine: Yes, there's one in there...
Transmission: One that shifts itself
E-mail sent
bubba353z is offline  
Old 09-13-2005, 06:41 PM
  #5  
Junior Member

iTrader: (1)
 
Iroccer's Avatar
 
Join Date: Sep 2003
Location: titletown...Green Bay Wi
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Car: Irocs and only Irocs
Engine: prefer 350s'
Transmission: corvette 700r4s'
black z

I got one 2500, black 91 Z28 5 speed needs a little love but looks pretty good Email me at batjac007@msn.com
Iroccer is offline  
Old 09-13-2005, 09:23 PM
  #6  
Junior Member
 
sk8runeg's Avatar
 
Join Date: Jan 2005
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Car: 1998 Trans Am WS6
Engine: LS1
Transmission: M6
I got an 86 IROC, black, T-Tops, 305 TPI, 116000 miles, 4th gen interior, no rust at all, tires with less than 4k on them Kumho Ecsta 712's.

Needs:
Windshield
Door has dent in it
Couple little things but great car

I'll e-mail ya some pics

$2000 firm I'm in MA, but I will drive a few hours to meet ya somewhere if you would like.

Thanks
-Scott

EDIT - Mods: Headers, fuell 3 inch exhaust, hypertech chip, air foil, K&N filters.

Last edited by sk8runeg; 09-13-2005 at 09:27 PM.
sk8runeg is offline  
Old 09-13-2005, 11:52 PM
  #7  
Junior Member
 
cmmr512's Avatar
 
Join Date: May 2004
Location: new york
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Car: 1984 corvette 84,86 z28's
Engine: 350 cross fire 350 tpi 305 carbed
Originally posted by flaming-ford
Well that is a pretty far drive but, if the car were in pretty good condition and what i am looking for, it could be worth it! Do you have any pics or videos of it? Any more info. on it?

What was included in the motor rebuild complete rebuild (pistons rings cam lifters so on.....) Btw what transmission does it have and is it rebuilt by any chance? What rearend and what rear gears? Does it have disk rear brakes? Anything else that will need taken care of other than what you listed above? What so far has been included in your 3,200 dollars in to the project other than a motor rebuild?

ps. sorry for so many questions.
ok included in the rebuild was new cam and lifters i know for sure, i bought the motor after it was just rebuilt and its pretty much sat for the last year i did a complete tune up on it though as for the tranny not sure i know its from an 88 formula with a 350 and it has a shift kit as for the rear end its stock from an 84z28 and i dunno the gears ill get you pics asap as i need to sell this car as for what is included in the 3,200 1,300 is from rims tires and the ss hood. but the rest is from the carpet door panels seats headliner i paid 800 for the formula that i got the motor and tranny from the guy said the motor is worth 1,500 alone and i bought the car for 250 from somebody off here just to give you an idea where all the money is at in the car again if your a do it yourselfer this is an easy project but still needs the bottom ends of the seatbelts and a heatshield, a windshield and the timing set, fairly minor things in my opinion the car is solid with no rust anywhere but the paint is less than steller
cmmr512 is offline  
Old 09-18-2005, 07:07 PM
  #8  
Supreme Member
Thread Starter
iTrader: (7)
 
flaming-ford's Avatar
 
Join Date: Aug 2005
Location: Ohio, near columbus
Posts: 1,068
Likes: 0
Received 1 Like on 1 Post
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
sorry everyone i ended up buying a camaro here locally and have been tweaking and cleaning it for the past weak or so, so i haven't realy been on the forum much anyways, just ignore this post and t/y for all the offers. sorry i won't be able to buy any of your great cars.

Btw if you wanted to know the car i bought is a 1992 rs/w the wittle 305 tbi motor (slow but, still quick enough to be fun). Anyways the car is basically in mint condition i've just been detailing and cleaning everything thoroughly for the last week.
flaming-ford is offline  
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frozer!!!
Camaros for Sale
35
01-19-2024 04:55 PM
StevenB L98/LS1
History / Originality
9
08-22-2015 09:03 AM
GVMV
Exterior Parts for Sale
0
08-16-2015 07:08 PM
Fronzizzle
Electronics
2
08-09-2015 01:15 PM
Steven 86IROC-Z
DFI and ECM
6
08-07-2015 07:40 AM



Quick Reply: looking for a 1988-1990 iroc-z or 1991/1992 z28 camaro



All times are GMT -5. The time now is 04:50 PM.