can anybody tell me what readings i should see on the primary fan relay pins. I have a dual fan setup. i looking at my reading of 12v on D and F. that dont make sense to me. thanks
Bryce

 

that a dual fan car?

if so,with the relay unplugged, the ecm has 12v on the trigger wire(f) until it wants the fan on, then it grounds the wire

D is 12v key on only

you should also have 12v at pin E

pin A goes to the fan(should have a resistance to ground with the relay off)


secondary fan is different, if the relay is unplugged, F will not be ground or 12v, it will read 12v with the relay plugged in