Ok folks, I went out yesteday to see if i could replace the burnt out bulbs in my car behind the AC/HEAT controls, and I dont know what I did, but when i uncrewed it from its place I couldnt get around it to find out where the bulbs were, so I decided not to mess with it anymore, and now, after everything is screwed back in, the fan wont work anymore on any setting.

I think I pulled something loose, the controls are all push button, on an 87 GTA, i dont know what to do, someone plz give me some help on how to get my fan working again, the HIGH setting didnt work before this, but now none of them do.

help

 

probably disconnected the connectors, since you said yours is all pushbutton that means the only thing back there are electrical connectors.

 

alright then, do I need to take it to a pontiac dealer or what?

I dont trust a local average joe shop to mess with it.

 

Just pull it out again, push all the connectors in tight, then try it.

 

as i said, I dont have enough room to pull it out, it comes out just a little, but no enough to get behind it

 

pull the radio out, should give you enough room to reach up around and see what cae unplugged