88 IROC heater plumbing
Thread Starter
Supreme Member
Joined: Sep 2001
Posts: 1,266
Likes: 4
From: Tallahassee, FL. USA
Car: 92 Camaro RS
Engine: 350 Crate Motor
Transmission: Tremec TKO
Axle/Gears: 10 Bolt 3.73
88 IROC heater plumbing
OK, here's the deal: We bought an '88 IROC for my son, bought it from a friend of mine. Before we got the car, it was stolen and recovered. The thieves took off the supercharger, alternator, smog pump diverter valve, etc.
Anyway, we've found the parts at junkyards, put everything back where it belongs (not the supercharger) and are getting close to being ready to fire it up, but we haven't figured out the heater hoses yet.
We do have a factory 88 manual, but it doesn't show the oil cooler, which is on the passenger side of the block. One hose comes from the heater core to the hard line above the frame rail, and then to the cooler and from the cooler to the radiator.
The hose on the other side of the heater core is cut off and there's no heater valve or hose going to the intake manifold.
Any help would be appreciated.
-Rich
Anyway, we've found the parts at junkyards, put everything back where it belongs (not the supercharger) and are getting close to being ready to fire it up, but we haven't figured out the heater hoses yet.
We do have a factory 88 manual, but it doesn't show the oil cooler, which is on the passenger side of the block. One hose comes from the heater core to the hard line above the frame rail, and then to the cooler and from the cooler to the radiator.
The hose on the other side of the heater core is cut off and there's no heater valve or hose going to the intake manifold.
Any help would be appreciated.
-Rich
Thread
Thread Starter
Forum
Replies
Last Post
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM
mustangman65_79
Body
3
Aug 11, 2015 03:17 PM





