Cooling Discuss all of the aspects of cooling that you can think of! Radiators, transmissions, electric fans, etc.

Coolant Being Sprayed Around Engine Bay. Water Pump Failling?

Thread Tools
 
Search this Thread
 
Old Nov 1, 2019 | 11:20 PM
  #1  
Vinscully50's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2013
Posts: 604
Likes: 29
Car: 1986 Camaro IROC Z
Engine: LB9 305 TPI
Transmission: 700R4
Coolant Being Sprayed Around Engine Bay. Water Pump Failling?

So I am losing coolant and have some sort of coolant leak from the front of my car. Early today when I started my car and popped the hood, coolant was being sprayed all around the engine bay. My guess it was hitting the belts and being shot around. Could the water pump be failing? It was replaced two years ago and it's from NAPA. Could it have failed already?
Reply
Old Nov 1, 2019 | 11:23 PM
  #2  
WildCard600's Avatar
Senior Member
 
Joined: Feb 2019
Posts: 786
Likes: 197
From: SW Missouri
Car: 1989 Trans Am
Engine: sp357
Transmission: TKX
Re: Coolant Being Sprayed Around Engine Bay. Water Pump Failling?

Pinhole in radiator hose ? Water pump gasket ? pinhole in heater hoses ?
Reply
Old Nov 1, 2019 | 11:34 PM
  #3  
Vinscully50's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2013
Posts: 604
Likes: 29
Car: 1986 Camaro IROC Z
Engine: LB9 305 TPI
Transmission: 700R4
Re: Coolant Being Sprayed Around Engine Bay. Water Pump Failling?

Originally Posted by WildCard600
Pinhole in radiator hose ? Water pump gasket ? pinhole in heater hoses ?
Would a pinhole in the lower radiator hose cause coolant to spray everywhere? Same with the heater hoses? It only sprays some of the time and when it does it looks like it's spraying from every direction.
Reply
Old Nov 2, 2019 | 02:07 AM
  #4  
CKone's Avatar
Member
iTrader: (2)
 
Joined: Apr 2016
Posts: 458
Likes: 171
From: East Moline, IL
Car: 88 T/A, 91 Formula, 94 Firehawk
Engine: 400 Pontiac, 5.0 TPI, 5.7 LT1
Transmission: 700R4, T5, T56
Axle/Gears: 4.10, 3.42, 3.42
Re: Coolant Being Sprayed Around Engine Bay. Water Pump Failling?

Originally Posted by Vinscully50
Would a pinhole in the lower radiator hose cause coolant to spray everywhere? Same with the heater hoses? It only sprays some of the time and when it does it looks like it's spraying from every direction.
Is it sprayed up upon the hood above the accessory drive belt? If so my speculation would be the water pump has failed and it’s coming from the weep hole. Look in the area of that you might stumble on the source that way.
Reply
Old Nov 2, 2019 | 11:28 AM
  #5  
Vinscully50's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2013
Posts: 604
Likes: 29
Car: 1986 Camaro IROC Z
Engine: LB9 305 TPI
Transmission: 700R4
Re: Coolant Being Sprayed Around Engine Bay. Water Pump Failling?

Originally Posted by CKone
Is it sprayed up upon the hood above the accessory drive belt? If so my speculation would be the water pump has failed and it’s coming from the weep hole. Look in the area of that you might stumble on the source that way.
When I last watched it spray, it looked like it was mostly lower in the belt and it was barely reaching the top of the radiator. Also when I first shut the car off a ton of coolant dripped but I couldn't pinpoint exactly where it was dripping from.

I was planning on flushing the coolant anyway, I already brought everything to do it. When I'm going to buy a lower radiator hose and replace it. If the problem isn't fixed I guess it means it's the waterpump.
Reply
Old Nov 2, 2019 | 12:31 PM
  #6  
thtanner's Avatar
Supreme Member
iTrader: (1)
 
Joined: May 2015
Posts: 1,154
Likes: 89
From: Temecula, CA
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700R4
Axle/Gears: BorgWarner 3.27 Posi
Re: Coolant Being Sprayed Around Engine Bay. Water Pump Failling?

The heater diverter valves fail often. Had one go on me on the freeway. Pop goes all the coolant.
Reply
Old Nov 11, 2019 | 05:12 PM
  #7  
NINÅ's Avatar
Supreme Member
 
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Loosing His Cool

It does sound like the water pump.

A way to stop the dripping in your garage or driveway until you can replace it is to bump the starter.

You will find a position which will stop it from coming out of the weep hole.



HappyRacing!

Headlight Goofs By Designers #15; TOO HIGH: Pickup truck headlights are mounted too high therefore they are not aimed onto the road, they are aimed into your eyes.

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
IROCmenace
Cooling
34
Apr 18, 2012 10:57 PM
tradeforcash@be
TPI
15
Jun 12, 2009 12:48 PM
91greenbird
Cooling
5
Jun 3, 2006 09:22 AM
rezinn
Tech / General Engine
10
Jul 15, 2001 12:28 AM
Bill 88TA
Tech / General Engine
6
Sep 27, 2000 03:47 PM




All times are GMT -5. The time now is 12:01 PM.