Building WinALDL cable
Supreme Member
Joined: Apr 2000
Posts: 1,686
Likes: 0
From: clinton,tn
The only part that got me into trouble was the switching transister didn't have it's own diagram. I did a search on the net and finally found one. The db9 connector is labled and the resisters arn't a problem as long as you get the transister correct.
I hope this helps a little and maybe someone will have a schematic on the switching transister. It would sure help some of us lesser educated with electronics to understand whats going on. Wouldn't hurt to have one on the winaldl down load page either.
Steve
I hope this helps a little and maybe someone will have a schematic on the switching transister. It would sure help some of us lesser educated with electronics to understand whats going on. Wouldn't hurt to have one on the winaldl down load page either.
Steve
Member
Joined: Mar 2002
Posts: 193
Likes: 0
Member
Joined: Mar 2002
Posts: 193
Likes: 0
Member
Joined: Jul 2001
Posts: 176
Likes: 0
From: Boise ID
Hey that was my post.....
I don't think anyone has ever linked to one of my posts to answer a question. Thanks just made my day.
Winaldl is a program you can run on a laptop or other computer and connect to your ALDL. It gives you a readout on what's going with your motor. There is a link in the first reply to the winaldl site.
Winaldl is a program you can run on a laptop or other computer and connect to your ALDL. It gives you a readout on what's going with your motor. There is a link in the first reply to the winaldl site.
Thread
Thread Starter
Forum
Replies
Last Post
wigmobile
Electronics
5
Feb 26, 2025 02:56 PM
