ECM connectors
Thread Starter
Supreme Member
Joined: Apr 2002
Posts: 1,353
Likes: 3
From: Austin
Car: 82 Z-28
Engine: 383 TPI
Transmission: 700R4
ECM connectors
I'm installing a 87 TPI eng and computer in my 82 Z-28 that came with Crossfire.
Where the wires come out of the computer, some of the wires connect to the cars wiring with 2 connectors. The connectors on the 87 harness look like they will plug into the 82 car wiring.
I'm assuming these 2 connectors provide 12 volts (all the time), 12v with ign on, ground, fuel pump control, CE light, ALDL conenctor, (what else?).
Anyone have a pin-out for these connectors so I can tell if it's OK to simply plug them in?
Thx
Where the wires come out of the computer, some of the wires connect to the cars wiring with 2 connectors. The connectors on the 87 harness look like they will plug into the 82 car wiring.
I'm assuming these 2 connectors provide 12 volts (all the time), 12v with ign on, ground, fuel pump control, CE light, ALDL conenctor, (what else?).
Anyone have a pin-out for these connectors so I can tell if it's OK to simply plug them in?
Thx
Thread
Thread Starter
Forum
Replies
Last Post
